Riding Mower Tire Tube: Inner Tubes by Tire Size
Finding the right riding mower tire tube can be tricky. This guide simplifies the process, covering sizes, types, and installation tips to keep your lawn tractor rolling.
Introduction to Riding Mower Tire Tubes
A flat tire on your riding mower can bring your lawn care routine to a screeching halt. While many mower tires are tubeless, punctures and slow leaks can make a riding mower tire tube a lifesaver. Installing a tube can often be more cost-effective and easier than replacing the entire tire. This guide will walk you through everything you need to know about selecting the right tube for your riding mower.
Recommended Parts for This Guide
8 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
We'll cover common tire sizes, tube types, installation tips, and where to find the perfect replacement for your John Deere, Craftsman, Cub Cadet, Husqvarna, or other popular brand. Remember to check your tire pressure regularly and inspect your tires for wear and tear as part of your regular maintenance. You'll find many other useful products for the transmission & drive system here at Madison Tractor, including belts, blades, spindles, and a variety of transmission tubes. We also stock specialized components like the inner tube yoke for drive shafts.
Understanding Riding Mower Tire Sizes
Decoding your tire size is the first step. riding mower tires typically use a two-number or three-number system. Let's break it down:
- Two-Number System: For example, 15x6.00-6. This indicates:
- 15: Overall tire diameter in inches.
- 6.00: Tire width in inches.
- 6: Rim diameter in inches.
- Three-Number System: For example, 16x6.50-8. This indicates:
- 16: Overall tire diameter in inches.
- 6.50: Tire width in inches.
- 8: Rim diameter in inches.
Look for this information molded onto the sidewall of your existing tire. Write it down! This is critical when selecting the correct riding mower tire tube.
Common Riding Mower Tire Sizes
Here are some of the most common tire sizes you'll find on riding mowers. Make sure to confirm the size on *your* mower's tires before ordering. Madison Tractor carries a wide range of tire tubes to fit nearly every mower:
- 13x5.00-6
- 15x6.00-6
- 16x6.50-8
- 18x6.50-8
- 18x8.50-8
- 20x8.00-8
- 20x10.00-8
- 11x4.00-4
- 4.10/3.50-4
Choosing the Right Type of Riding Mower Tire Tube
Once you know your tire size, consider the type of tube. Most riding mower tire tubes are made of either butyl rubber or natural rubber.
- Butyl Rubber Tubes: These are the most common and offer good air retention and durability. They are generally more resistant to punctures and leaks compared to natural rubber.
- Natural Rubber Tubes: Natural rubber tubes are more flexible and can stretch more easily. This makes them a good choice for tires that may experience a lot of flexing. However, they tend to lose air more quickly than butyl tubes.
For most applications, a butyl rubber tube is the best choice for a riding mower tire tube. Madison Tractor stocks a wide range of butyl tubes in various sizes. While browsing our products, you may also be interested in related parts like wheel bearings, inner tubes, or other parts related to the riding mower drive belt.
Valve Stem Types: TR13 vs. TR87
The valve stem is another important consideration. The two most common types are TR13 and TR87.
- TR13: This is a straight rubber valve stem. It's the most common type and works well for most riding mower wheels.
- TR87: This is a bent rubber valve stem. The bent design makes it easier to access for inflation, especially on wheels with limited space.
Choose the valve stem that best suits your wheel design and personal preference. If you have trouble reaching the valve stem with a standard air chuck, a TR87 might be a better option.
Installing a Riding Mower Tire Tube: A Step-by-Step Guide
Installing a tire tube is a straightforward process, but safety should always be your top priority. Here's a step-by-step guide:
- Safety First: Disconnect the spark plug wire to prevent accidental starting. Wear safety glasses and gloves.
- Remove the Wheel: Use a lug wrench to loosen the lug nuts, then jack up the mower and support it with jack stands. Remove the wheel.
- Deflate the Tire: If the tire isn't already flat, deflate it completely.
- Break the Bead: Use tire irons or a bead breaker to separate the tire bead from the rim. This may require some effort.
- Remove the Tire: Once the bead is broken on both sides, carefully remove the tire from the rim.
- Inspect the Tire: Check the inside of the tire for any sharp objects that may have caused the puncture. Remove any debris.
- Insert the Tube: Slightly inflate the new tube to give it some shape. Insert the valve stem through the hole in the rim. Carefully tuck the tube inside the tire, making sure it's evenly distributed.
- Reinstall the Tire: Work the tire back onto the rim, starting with one side. Use tire irons if needed. Be careful not to pinch the tube.
- Inflate the Tire: Inflate the tire to the recommended pressure (check the tire sidewall for the correct PSI).
- Check the Bead: Make sure the tire bead is seated properly on both sides of the rim. You should see a consistent line around the tire.
- Reinstall the Wheel: Mount the wheel back onto the mower and tighten the lug nuts. Remove the jack stands and lower the mower.
- Tighten Lug Nuts: Give the lug nuts a final tightening.
- Reconnect Spark Plug: Reconnect the spark plug wire.
Warning: Always use jack stands when working under a riding mower. Never rely solely on a jack.
Need a new riding mower rear axle seal while you're at it? Madison Tractor has you covered!
Troubleshooting Common Issues
- Pinching the Tube: This is a common problem during installation. If the tube gets pinched between the tire and the rim, it will likely leak. Ensure the tube is evenly distributed inside the tire and use tire irons carefully.
- Incorrect Tire Pressure: Overinflating or underinflating the tire can lead to problems. Check the tire sidewall for the recommended PSI and use a tire pressure gauge.
- Slow Leaks: If the tire slowly loses air after installing a new tube, check the valve stem for leaks. You can also submerge the inflated tire in water to check for leaks in the tire or around the rim.
Choosing the Right Tire Tube for Your Brand of Mower
While tire sizes are standard, here's how to apply what you've learned to specific brands:
- John Deere: John Deere mowers use a variety of tire sizes. Consult your owner's manual or check the tire sidewall to determine the correct size. Madison Tractor carries a wide range of John Deere tire tubes and John Deere transmission parts, including outer and inner tubes for drive shafts.
- Craftsman: Craftsman mowers also come with different tire sizes. The 15x6.00-6 and 20x8.00-8 are common. We stock many tubes for Craftsman mowers, transmission tubes, as well as Craftsman drive belts.
- Cub Cadet: Cub Cadet mowers often use larger tires, such as 20x10.00-8. Check your tire size before ordering. We can help with drive system tubes and even Cub Cadet transmission parts.
- Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, Dixie Chopper: Regardless of your brand, the tire size is the key. Use the information above to determine the correct size and valve stem type for your mower.
Remember to consult your owner's manual for specific recommendations for your mower model.
Conclusion
Choosing the correct riding mower tire tube is essential for keeping your lawn tractor running smoothly. By understanding tire sizes, tube types, and installation procedures, you can confidently tackle a flat tire and get back to mowing. Remember to always prioritize safety and consult your owner's manual for specific instructions.
If your mower has a lawn tractor transaxle, remember to maintain it well by checking your hydrostatic transmission fluid regularly.
Shop Riding Mower Tire Tubes at Madison Tractor Company
Madison Tractor Company is your one-stop shop for all your riding mower parts needs. We carry a wide selection of riding mower tire tubes, tires, and other essential parts for John Deere, Craftsman, Cub Cadet, Husqvarna, and many other brands. Browse our selection today and get your mower back in top condition! Our website has everything from common items like filters and spark plugs to more specialized parts. Shop with confidence knowing you're getting quality parts at competitive prices. You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Mower Transmission Parts Guide: Transaxle, Drive Belt & Bearings















