Murray Riding Mower Drive Belt: Part Numbers
Replacing a worn or broken Murray drive belt is essential for keeping your riding mower running smoothly. This guide helps you find the correct part number and offers practical advice for a successful replacement.
A slipping or broken drive belt on your Murray riding mower can bring your lawn care to a halt. The drive belt, a crucial component of the riding mower drive belt system, transfers power from the engine to the transaxle, enabling the mower to move. This guide will help you identify the correct Murray drive belt part number for your specific model and offer tips on replacement and maintenance.
Recommended Parts for This Guide
8 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
Identifying Your Murray Model
Before you can find the correct Murray drive belt, you need to identify your mower's model number. This is typically found on a sticker or plate located:
- Under the seat
- On the frame, near the engine
- On the side of the mower deck
Once you've located the model number, write it down. This number is crucial for finding compatible parts, including belts, blades, spindles, and filters. Murray model numbers typically start with a combination of letters and numbers.
Finding the Correct Drive Belt Part Number
With your Murray model number in hand, you have several options for finding the correct drive belt part number:
- Murray's Website or Parts Diagram: Visit the official Murray website (if available) or a website that provides online parts diagrams. Enter your model number to access exploded views and parts lists. The drive belt will be listed with its corresponding part number.
- Madison Tractor Company: Use the search bar on our website, Madison Tractor Company, and enter your Murray model number. Our parts finder tool will display compatible drive belts and other parts like spark plugs. You can also filter by category to narrow your search.
- Owner's Manual: Your owner's manual should contain a parts list, including the drive belt part number.
- Cross-Reference Tools: Use online cross-reference tools. These tools allow you to enter a competitor's part number or a generic belt size to find a compatible Murray part number. However, always double-check compatibility with your model.
- Consult a Parts Expert: Contact Madison Tractor Company's customer service. Our knowledgeable staff can assist you in identifying the correct drive belt based on your Murray model number.
Common Murray Drive Belt Part Numbers
While it's always best to verify with your specific model, here are a few common Murray drive belt part numbers to give you an idea:
- 37x88: Used on some Murray and Noma models, this belt fits various lawn tractors.
Disclaimer: Part numbers can change, and compatibility varies based on specific models. Always verify the part number with your mower's manual or a reliable parts lookup tool.
Replacing Your Murray Drive Belt: Step-by-Step
Replacing your Murray drive belt is a straightforward task with the right tools and precautions. Here's a general guide:
Safety First!
- Disconnect the spark plug wire before starting any work on your mower. This prevents accidental starts.
- Wear gloves to protect your hands.
- Work on a level surface.
Tools You'll Need:
- New Murray drive belt
- Socket set or wrenches
- Pliers
- Screwdriver (Phillips and flathead)
- Jack (optional, for easier access)
- Belt installation tool (optional, but helpful)
Steps:
- Access the Belt: Depending on your Murray model, you might need to remove the mower deck or other components to access the drive belt. Consult your owner's manual for specific instructions on removing the deck.
- Release Tension: Locate the idler pulley or tensioner pulley. Use a wrench or socket to release the tension on the belt. Some models have a spring-loaded tensioner that you can pivot.
- Remove the Old Belt: Carefully remove the old belt from the pulleys. Note the belt routing for reference when installing the new belt.
- Install the New Belt: Route the new belt exactly as the old belt was routed. Ensure the belt sits properly in the grooves of all pulleys.
- Apply Tension: Re-engage the idler pulley or tensioner pulley to apply tension to the belt.
- Reassemble: Reinstall the mower deck or any other components you removed.
- Test: Reconnect the spark plug wire. Start the mower and engage the drive. Check for proper operation and any unusual noises. If the belt slips or squeals, double-check the routing and tension.
Troubleshooting Common Drive Belt Problems
Here are some common issues related to Murray drive belts:
- Belt Slipping: This can be caused by a worn belt, incorrect belt routing, or a faulty tensioner pulley. Replace the belt or adjust the tensioner. Consider inspecting other pulleys.
- Belt Squealing: Often indicates a loose belt or misaligned pulleys. Tighten the belt or align the pulleys.
- Belt Breaking: Caused by excessive wear, improper installation, or debris caught in the belt. Replace the belt and inspect for any obstructions.
- Mower Won't Move: A broken or severely worn belt will prevent the mower from moving. Replace the belt. This could also be related to issues in the lawn tractor transaxle or a broken axle; inspect these components as well.
Extending the Life of Your Murray Drive Belt
Here are some tips to help prolong the life of your Murray drive belt:
- Regular Inspection: Check the belt regularly for wear, cracks, or damage.
- Proper Tension: Ensure the belt has the correct tension. Too loose, and it will slip; too tight, and it will wear prematurely.
- Keep Pulleys Clean: Remove any debris from the pulleys to prevent wear on the belt.
- Avoid Overloading: Don't overload the mower by cutting excessively tall or thick grass. This puts extra strain on the drive belt.
- Proper Storage: Store your mower in a dry place to prevent the belt from deteriorating.
These tips apply to many brands we service including John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, and Dixie Chopper.
If you're working on the rear axle, consider replacing the riding mower rear axle seal at the same time to prevent future leaks. And remember to check the hydrostatic transmission fluid level and condition if your Murray has a hydrostatic transmission.
Shop Murray Parts at Madison Tractor
Finding the right Murray drive belt is crucial for maintaining your riding mower's performance. At Madison Tractor Company, we offer a wide selection of Murray parts, including drive belts, blades, spindles, and more. Use our parts finder tool or contact our expert team to find the parts you need to keep your Murray mower running smoothly. Shop our selection of Murray riding mower parts today! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Mower Transmission Parts Guide: Transaxle, Drive Belt & Bearings















