Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

John Deere Disc Mower Blade: HX & MX Series Knives

Choosing the correct John Deere disc mower blades is crucial for efficient hay cutting. This guide covers HX and MX series mowers, offering insights on blade types, installation, and maintenance to keep your hay equipment performing optimally.

Introduction to John Deere disc mower blades

A well-maintained disc mower is essential for efficient hay production. The blades, or knives, are the most critical component. Dull or damaged blades drastically reduce cutting performance, increase fuel consumption can even damage your mower. This guide focuses on John Deere disc mower blades, specifically for the HX and MX series, providing you with the knowledge to select the right blades and keep your machine running smoothly. Remember to always consult your operator's manual for specific recommendations related to your model.

Recommended Parts for This Guide

7 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

At Madison Tractor Company, we understand the importance of quality parts. We offer a wide selection of replacement parts for various brands, including John Deere, Case IH, Ford, New Holland, Massey Ferguson, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra Zetor. Whether you need John Deere tractor parts, New Holland baler parts, or components for any other major brand, we're here to help.

Understanding John Deere HX and MX Series Disc Mowers

The HX and MX series disc mowers from John Deere are known for their durability and performance. These mowers are widely used for hay production and roadside maintenance. The HX series typically refers to heavy-duty trailed mowers, while the MX series encompasses both mounted and trailed models. Knowing your mower's specific model number (e.g., HX10, MX7, MX10) is crucial when selecting replacement blades.

Common John Deere Disc Mower Models

  • HX10
  • HX14
  • HX15
  • MX5
  • MX6
  • MX7
  • MX8
  • MX10

Types of John Deere Disc Mower Blades

Several types of blades are available for John Deere disc mowers. The most common types are

  • Standard Blades These are general-purpose blades suitable for most cutting conditions.
  • Heavy-Duty Blades Made from thicker steel or with a reinforced design, these blades are ideal for tough conditions, such as thick grass or areas with rocks.
  • Long-Life Blades These blades feature a hardened cutting edge for extended wear resistance.
  • Twisted Blades Designed for improved cutting and material flow, reducing clogging and improving cut quality.

The correct blade type depends on your specific needs and cutting conditions. For heavy brush, consider heavy-duty blades. For general hay cutting, standard or long-life blades are often sufficient.

OEM Part Numbers and Cross-References

Selecting the Right disc mower blade

Choosing the correct blade is essential for optimal performance. Consider these factors

  • Mower Model Always verify that the blade is compatible with your specific John Deere disc mower model. Consult your operator's manual or our website for compatibility information.
  • Cutting Conditions Choose heavy-duty blades for tough conditions and standard blades for general use.
  • Blade Material Look for blades made from high-quality steel for durability and long life.

When browsing our selection of Hay & Forage Equipment Parts, pay close attention to the product descriptions and specifications to ensure you're selecting the right blade for your John Deere mower.

Disc Mower Blade Replacement: A Step-by-Step Guide

Replacing disc mower blades is a straightforward process, but safety is paramount. Always disconnect the PTO shaft and ensure the mower is safely supported before beginning any work.

  1. Safety First Engage the parking brake, turn off the engine, remove the key disconnect the PTO shaft.
  2. Inspect the Blades Examine each blade for wear, damage, or cracks. Replace any blades that are damaged or excessively worn.
  3. Remove the Old Blades Most John Deere disc mowers use a bolt or pin to secure the blades. Use the appropriate tool to remove the fastener. Some models may have a quick-change system.
  4. Install the New Blades Align the new blade with the mounting holes and secure it with the fastener. Ensure the blade is properly seated and tightened to the manufacturer's specifications (typically around 50-60 ft-lbs). Always use new hardware if the old hardware is worn or damaged.
  5. Check for Proper Rotation Rotate the disc by hand to ensure the blades move freely and do not contact any other components.
  6. Repeat for All Blades Replace all blades on the mower to maintain balance and even cutting performance.

Safety Warning Always wear safety glasses and gloves when replacing disc mower blades. Sharp edges can cause injury.

Maintenance Tips for Long Blade Life

Proper maintenance can significantly extend the life of your disc mower blades

  • Regular Inspection Inspect blades regularly for wear, damage, or cracks. Replace worn or damaged blades immediately.
  • Sharpening Sharpening blades can improve cutting performance. Use a grinder or file to sharpen the cutting edge. Be sure to maintain the original blade angle. However, excessive sharpening thins the blade and weakens its structure; replacement is eventually necessary.
  • Proper Storage Store spare blades in a dry place to prevent rust and corrosion.
  • Avoid Obstructions Be mindful of rocks, stumps other obstructions in the field. These can damage blades and other mower components.

Regular greasing of the cutter bar and proper adjustment of the mower's cutting height are also crucial for maintaining optimal performance and extending the life of your disc mower.

Troubleshooting Common Blade Issues

Here are some common problems you might encounter with your disc mower blades and how to address them

  • Uneven Cutting This can be caused by worn or damaged blades. Replace all blades to ensure even cutting performance.
  • Blade Breakage This can be caused by hitting obstructions or using the wrong type of blade for the cutting conditions. Choose heavy-duty blades for tough conditions and avoid obstructions.
  • Clogging Clogging can be caused by dull blades or excessive cutting speed. Sharpen or replace blades and reduce cutting speed. Also, ensure proper lubrication of the cutter bar.
  • Excessive Vibration This can be caused by unbalanced blades. Ensure all blades are the same weight and in good condition. Check for bent or damaged discs.

If you're experiencing issues with your round baler belts, baler pickup teeth, or other related equipment, be sure to check out our other helpful articles.

Beyond Blades: Maintaining Your Disc Mower

While the blades are critical, other components of your disc mower require regular attention. Inspect and maintain

  • Gearboxes Check oil levels and inspect for leaks. Replace the oil according to the manufacturer's recommendations.
  • Bearings Listen for unusual noises or vibrations, which may indicate worn bearings.
  • Skid Shoes These protect the cutter bar from ground contact. Replace them when worn.
  • Hydraulic Cylinders Inspect for leaks and ensure proper operation.
  • PTO Shaft Grease regularly and inspect for wear or damage.

Madison Tractor Company offers a wide range of parts for maintaining your disc mower, including radiators, water pumps, starters, alternators, hydraulic pumps, cylinders, clutch kits, PTO parts, fuel pumps, carburetors, injectors, filters, gaskets, pistons, bearings, seals belts. Find everything you need to keep your hay equipment in top condition.

Conclusion

Choosing the right John Deere disc mower blades and maintaining them properly is crucial for efficient hay production. By understanding the different blade types, following our replacement guide implementing our maintenance tips, you can extend the life of your blades and keep your disc mower running smoothly.

Ready to find the right John Deere disc mower blades for your machine? Shop our extensive selection at Madison Tractor Company! We offer quality parts at competitive prices, with fast shipping and expert support. Don't forget to check out our selection of baler twine and round baler net wrap for all your hay baling needs. Keep your equipment running strong with Madison Tractor Company!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →

Related Articles