Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Briggs & Stratton Ignition Coil: Part Numbers by Engine

A faulty ignition coil can leave your Briggs & Stratton engine dead. This guide helps you identify the right replacement, troubleshoot common issues, and get back to mowing with confidence.

The briggs and stratton ignition coil is a vital component in your lawn mower or small engine, responsible for providing the high-voltage spark needed to ignite the air-fuel mixture and get your engine running. When your engine refuses to start, sputters, or lacks power, a failing ignition coil is a prime suspect. At Madison Tractor Company, we understand the frustration of a non-starting engine and are here to help you diagnose and replace your Briggs & Stratton ignition coil with the correct part.

Recommended Parts for This Guide

3 parts we recommend β€” in stock, ships fast, one-click add to cart.

πŸ” Looking for a specific part? Try our AI Part Finder β€” tell it your equipment and what you need, and it will find matching parts instantly.

Understanding Briggs & Stratton Ignition Systems

Before diving into part numbers, let’s briefly discuss the basics of Briggs & Stratton ignition systems. Most small engines use a magneto ignition system, meaning the coil generates its own electricity using magnets on the flywheel. As the flywheel spins, its magnets pass by the ignition coil, inducing a voltage that is then amplified and sent to the spark plug. Some newer Briggs & Stratton engines use electronic ignition systems, which may incorporate an electronic control module (ECM) for more precise timing and fuel management.

A healthy ignition system delivers a strong, consistent spark to the spark plug at precisely the right moment. Any weakness in the system, from a corroded spark plug to a cracked ignition coil, can disrupt this process and prevent your engine from starting. And don't forget to check your spark plug! We carry a variety of spark plugs to suit your needs.

Identifying the Correct Briggs & Stratton Ignition Coil

Finding the right briggs and stratton ignition coil for your engine requires knowing your engine's model, type, and code. These numbers are typically stamped on the engine's metal housing, often near the spark plug or on the valve cover. Once you have these numbers, you can use the Briggs & Stratton parts lookup tool (available on their website) or consult with one of our parts experts at Madison Tractor Company to determine the correct ignition coil part number.

Here are some common Briggs & Stratton ignition coil part numbers and the engines they fit. Please note: This is not an exhaustive list, and you should always verify the part number using your engine's model, type, and code:

Browse our Briggs & Stratton ignition coil catalog for current part numbers and pricing.

When searching for a replacement, keep in mind that some coils have been superseded by newer part numbers. If you find a discontinued part number, our team can help you identify the correct replacement. We stock a wide range of Briggs & Stratton ignition coils.

Brands That Use Briggs & Stratton Engines

Briggs & Stratton engines are found on a multitude of outdoor power equipment brands. Some of the most common brands we support at Madison Tractor Company include:

  • Riding Mowers: John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Murray
  • Zero Turn Mowers: Hustler, Scag, Exmark, Ferris, Dixie Chopper
  • Walk-Behind Mowers: Toro, Craftsman, Snapper, Murray
  • Snow Blowers: Ariens, Toro, Craftsman, Simplicity

No matter what brand of equipment you own, if it has a Briggs & Stratton engine, we can help you find the right briggs and stratton ignition coil and other parts, such as blades, belts, and filters.

Testing Your Briggs & Stratton Ignition Coil

Before replacing your ignition coil, it's essential to confirm that it's actually the source of the problem. Here's a simple test you can perform:

  1. Safety First: Disconnect the spark plug wire from the spark plug.
  2. Spark Plug Inspection: Remove the spark plug and inspect it for fouling, cracks, or damage. To remove it, a spark plug wrench is typically required. Replace the spark plug if necessary. A new spark plug can often solve starting issues.
  3. Grounding Test: Reconnect the spark plug to the wire and hold the metal base of the spark plug against a clean, unpainted metal surface on the engine.
  4. Pull the Starter Rope: While holding the spark plug against the engine, briskly pull the starter rope.
  5. Observe for Spark: Look for a strong, blue spark jumping across the spark plug gap. A weak, yellow spark or no spark at all indicates a problem with the ignition coil or other components of the ignition system.

If you don't see a strong spark, the ignition coil is likely faulty. However, other issues can also prevent spark, such as a faulty kill switch, a broken flywheel key (which affects timing), or a short in the wiring harness. You may also want to test the seat safety switch (if equipped) and the PTO switch to rule those out.

Replacing Your Briggs & Stratton Ignition Coil

Replacing a briggs and stratton ignition coil is a straightforward process that most homeowners can handle with basic tools. Here's a general overview of the steps involved:

  1. Safety First: Disconnect the spark plug wire and remove the spark plug. Disconnect the negative battery cable (if equipped with an electric start).
  2. Remove Engine Shroud: Remove the engine shroud or any other components that are blocking access to the ignition coil.
  3. Disconnect Wires: Disconnect the wires connected to the ignition coil. Note their positions for reinstallation.
  4. Remove Old Coil: Remove the bolts or screws securing the ignition coil to the engine. Carefully remove the old ignition coil.
  5. Install New Coil: Install the new ignition coil, ensuring it is properly aligned with the flywheel. Refer to your engine's service manual for the correct air gap setting between the coil and the flywheel. This gap is crucial for proper ignition timing. A business card or feeler gauge can be used to set the correct gap.
  6. Reconnect Wires: Reconnect the wires to the new ignition coil, ensuring they are securely attached.
  7. Reinstall Components: Reinstall the engine shroud and any other components that were removed.
  8. Reconnect Spark Plug: Reconnect the spark plug wire to the spark plug.
  9. Reconnect Battery: Reconnect the negative battery cable (if disconnected).
  10. Test Engine: Start the engine and verify that it runs smoothly.

Safety Warning: Always disconnect the spark plug wire before working on the ignition system to prevent accidental starting. Work in a well-ventilated area and avoid contact with flammable materials.

Additional Resources and Troubleshooting

If you're still experiencing problems after replacing the ignition coil, consider these additional troubleshooting steps:

  • Check the Flywheel Key: A sheared flywheel key can throw off the engine timing and prevent it from starting.
  • Inspect the Wiring Harness: Look for any damaged or corroded wires in the ignition system.
  • Test the Kill Switch: A faulty kill switch can prevent the engine from starting.
  • Check the Starter Motor: If the engine isn't turning over, the riding mower starter motor may be the culprit.
  • Test the Solenoid: A bad riding mower solenoid can also prevent the starter from engaging.
  • Check the Voltage Regulator: A faulty riding mower voltage regulator can cause battery and charging problems.
  • Inspect the Battery: Ensure your riding mower battery is properly charged and in good condition.

Madison Tractor Company: Your Source for Briggs & Stratton Parts

At Madison Tractor Company, we are committed to providing our customers with high-quality parts and expert advice. We carry a wide selection of briggs and stratton ignition coil replacements, along with other essential parts like belts, blades, spindles, and pulleys to keep your outdoor power equipment running smoothly.

Browse our online catalog or contact our knowledgeable parts experts today to find the right parts for your Briggs & Stratton engine. We are here to help you get your mower back in action!

πŸ” Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder β†’