Combine Harvester Parts Guide: Pre-Season Checklist & Replacement Parts
Maximize your harvest with this comprehensive guide to combine parts and pre-season maintenance. Get expert advice on inspection, replacement, and critical checks for peak performance. Brought to you by Madison Tractor Company.
A combine harvester is a significant investment, and ensuring it's in top working order before harvest season is crucial. This guide provides a comprehensive pre-season checklist and highlights essential combine parts replacements to minimize downtime and maximize your yield. At Madison Tractor Company, we understand the importance of reliable equipment, which is why we stock a wide range of combine parts for all major brands, including John Deere, Case IH, New Holland, Gleaner, Massey Ferguson, and more.
Recommended Parts for This Guide
10 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
Pre-Season Combine Inspection Checklist
A thorough inspection is the first step in preparing your combine for harvest. This checklist covers the key areas you need to address. Always consult your operator's manual for specific maintenance recommendations for your model.
1. Engine System
The engine is the heart of your combine. A well-maintained engine ensures consistent power and efficiency.
- Visual Inspection: Search available parts
- Fluid Levels: Check and top off engine oil, coolant, transmission fluid, and hydraulic fluid. Use the correct fluids as specified in your operator's manual. Note the hours since the last service, and change the oil if required.
- Filters: Replace all filters, including oil filter and cartridge oil filter. Clean air filters can drastically improve fuel economy. Madison Tractor stocks a wide variety of filters for all combine makes and models, including those from Donaldson and Fleetguard.
- Cooling System: Inspect the radiator for blockages. Clean out any debris, such as chaff or insects, from the radiator fins. Check the condition of the radiator cap and pressure test the cooling system. Faulty radiators can lead to overheating and major engine damage. We carry radiators for many brands, including Ford/New Holland combines.
- Starting System: Check the battery terminals for corrosion and clean them. Test the battery's charge and replace it if necessary. Inspect the starter and alternator for proper operation. Ensure good connections to all components.
Safety Warning: Always disconnect the battery before working on the electrical system.
2. Threshing and Separating System
This system is responsible for separating the grain from the crop material. Proper adjustment and maintenance are critical for minimizing grain loss.
- Concaves: Inspect the concaves for wear, damage, or broken wires. Worn or damaged concaves can significantly increase grain loss. Depending on your crop type, consider replacing your concaves with a different style (wire, round bar, or slotted) for optimal performance. See our article Combine Concave Replacement: Wire, Round Bar & Slotted for more information. john deere combine concave options can be found at John Deere Combine Concave: STS & S-Series Parts.
- Rotor/Cylinder: Inspect the rotor or cylinder bars for wear or damage. Replace any worn or damaged bars. Check the rotor or cylinder speed settings and adjust them according to the crop being harvested.
- Separating Grates: Inspect the separating grates for blockages or damage. Clean or replace as needed.
- Chaffer and Sieve: Inspect the chaffer and sieve for damage, wear, or blockages. Clean or replace as needed. Adjust the chaffer and sieve settings according to the crop being harvested. Incorrect settings can lead to excessive grain loss over the back.
3. Header and Feederhouse
The header cuts and gathers the crop, feeding it into the combine. A properly maintained header ensures efficient crop flow.
- Sickle Sections: Inspect the sickle sections for sharpness and damage. Dull or damaged sickle sections can lead to crop shattering and increased header loss. Replace worn sickle sections as needed.
- Guards: Inspect the guards for damage or misalignment. Damaged or misaligned guards can cause crop to be missed by the sickle.
- Reel: Inspect the reel bats and tines for damage. Adjust the reel speed and position according to the crop being harvested.
- Feederhouse Chain: Inspect the feederhouse chain for wear and proper tension. A loose or worn feederhouse chain can cause feeding problems.
- Feederhouse Sprockets: Inspect the feederhouse sprockets for wear and replace if necessary.
- Hydraulic Cylinders: Inspect header lift cylinders for leaks or damage.
4. Cleaning System
This system removes chaff and other debris from the grain.
- Chaffer and Sieve: As mentioned previously, inspect these components for damage, wear, or blockages.
- Fan: Inspect the cleaning fan for damage and proper operation. Adjust the fan speed according to the crop being harvested.
5. Driveline and Transmission
These components transmit power from the engine to the wheels and other components.
- Belts: Inspect all combine belts for wear, cracks, or fraying. Replace as needed. Proper belt tension is critical. Common belt failures include the main drive belt (often a B section or C section belt), feeder house belt, and separator belt. Refer to your manual for specific belt sizes and tension specifications.
- Chains: Inspect all chains for wear and proper lubrication. Adjust chain tension as needed.
- bearings: Inspect all bearings for excessive wear or play. Replace worn bearings.
- Gearboxes: Check the oil level in all gearboxes and add oil as needed. Inspect for leaks.
- Hydraulic System: Inspect hydraulic hoses, fittings, and cylinders for leaks. Check the hydraulic fluid level and add fluid as needed. We carry hydraulic pumps for many models including Allis Chalmers combines.
6. Tires and Wheels
Proper tire inflation and wheel alignment are essential for safe and efficient operation.
- Tire Pressure: Check tire pressure and inflate to the recommended pressure.
- Tire Condition: Inspect tires for wear, cuts, or bulges.
- Wheel Bearings: Check wheel bearings for play.
- Wheel Alignment: Ensure proper wheel alignment.
7. Safety Equipment
Ensure all safety equipment is in good working order.
- Lights: Check all lights and replace any burned-out bulbs.
- Reflectors: Ensure all reflectors are clean and visible.
- Warning Devices: Check the horn and other warning devices.
- Fire Extinguisher: Ensure the fire extinguisher is fully charged and readily accessible.
Essential Combine Parts Replacements
Based on your inspection, you'll likely need to replace some combine parts. Here's a list of common replacement parts:
- Engine Parts: This includes parts like radiators, water pumps, starters, alternators, fuel pumps, injectors, pistons, rings, and gaskets such as oil filter seals, oil filter housing gaskets, and pan gaskets. For example, a Massey Ferguson 8570 combine might need a new water pump (cross-reference number 3637256M91) if the original is leaking.
- Filters: As mentioned above, replacing all filters, including oil filters and cartridge oil filters, is crucial for optimal performance.
- Belts and Chains: These are wear items and should be replaced regularly.
- Concaves: John Deere combine concave and other brands' concaves are wear items that affect grain loss.
- Sickle Sections and Guards: These are critical for efficient cutting.
- Bearings and Seals: Replacing worn bearings and seals can prevent more serious damage.
- Hydraulic Components: Hydraulic pumps, cylinders, and hoses can leak or fail over time.
- Electrical Components: Starters, alternators, and wiring harnesses can fail due to age and wear.
Specific Combine Brands and Models
Madison Tractor Company stocks combine parts for a wide range of brands and models. Here are some examples:
- John Deere: We carry John Deere combine parts for models like the 9000 series, S-Series, and X-Series. Common parts include concaves, sieves, belts, and engine components.
- Case IH: We stock Case IH combine parts for the Axial-Flow 1400-9200 series. Common parts include rotor bars, concaves, and feederhouse chains.
- New Holland: We carry New Holland combine parts for the CR, CX, and TR series. Common parts include belts, concaves, and cleaning system components.
- Gleaner: We stock Gleaner combine parts for the R, N, and S series. Common parts include accelerator rolls, feeder chains, and cleaning fan components.
- Massey Ferguson: We carry Massey Ferguson combine parts for the 700 and 8500 series. Common parts include sickle sections, belts, and hydraulic components.
Maintenance Tips for Longevity
Regular maintenance can significantly extend the life of your combine.
- Daily Maintenance: Check fluid levels, lubricate grease fittings, and clean chaff from the engine compartment and radiator.
- Weekly Maintenance: Inspect belts, chains, and bearings for wear. Adjust belt and chain tension as needed.
- Seasonal Maintenance: Perform a thorough inspection before each harvest season, as outlined in this guide. Replace any worn or damaged parts.
- Off-Season Storage: Properly prepare your combine for storage at the end of the harvest season. This includes cleaning the combine, lubricating all moving parts, and protecting it from the elements.
Safety First
Working on agricultural equipment can be dangerous. Always follow these safety precautions:
- Read the Operator's Manual: Understand the operation and maintenance procedures for your specific combine model.
- Disconnect the Battery: Before working on the electrical system, disconnect the battery to prevent electrical shock.
- Use Proper Tools: Use the correct tools for the job and ensure they are in good working order.
- Wear Safety Gear: Wear safety glasses, gloves, and hearing protection when working on the combine.
- Work in a Safe Environment: Work in a well-lit and ventilated area.
- Never Work Under Unsupported Equipment: Always use jack stands or other supports when working under the combine.
By following this comprehensive guide, you can ensure that your combine is ready for harvest season. Remember to inspect your combine thoroughly, replace worn or damaged parts, and follow all safety precautions.
Madison Tractor Company is your trusted partner for all your combine parts needs. We offer a wide selection of high-quality parts at competitive prices. Shop online today or contact our knowledgeable staff for assistance in finding the right parts for your combine. We proudly serve farmers and ranchers with parts for John Deere, Case IH, Ford, New Holland, Massey Ferguson, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra, and Zetor equipment.
🔍 Can't Find Your Part?
Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.
Try the Part Finder →Part of our comprehensive guide
Combine Harvester Parts Guide: Pre-Season Checklist & Replacement Parts
















