Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

New Holland Tractor Hydraulic Pump: TC, TN & TS Models

Is your New Holland TC, TN, or TS series tractor hydraulic pump failing? This guide provides troubleshooting tips and replacement information to help you get your tractor back in working order. Find the right pump and related hydraulic parts at Madison Tractor.

Hydraulic systems are the lifeblood of many New Holland tractors, powering everything from the loader and steering to the three-point hitch. A properly functioning hydraulic pump is essential for smooth and efficient operation. This guide focuses on common issues and solutions for new holland hydraulic pump problems, specifically within the popular TC, TN TS series of tractors.

Recommended Parts for This Guide

10 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

Introduction to New Holland TC, TN TS Series Hydraulic Systems

The New Holland TC (Compact), TN (Narrow) TS (Standard) series tractors are known for their versatility and reliability. These tractors utilize hydraulic systems to perform a wide range of tasks. The hydraulic pump is the heart of this system, responsible for providing the necessary pressure and flow to operate hydraulic components. Over time, pumps can wear out, become damaged, or develop leaks, leading to reduced performance and potential downtime. At Madison Tractor, we understand the importance of keeping your New Holland running smoothly. We stock a wide range of parts, including new holland hydraulic pumps, to get you back in the field.

Common Hydraulic Pump Problems

Several factors can contribute to hydraulic pump failure. Identifying the root cause is crucial for effective repair or replacement

  • Cavitation This occurs when air or vapor bubbles form within the hydraulic fluid and then collapse, causing damage to the pump's internal components. Cavitation is often characterized by a loud knocking or rattling noise.
  • Contamination Dirt, debris other contaminants in the hydraulic fluid can wear down the pump's internal parts, leading to reduced efficiency and eventual failure. Always use the correct tractor hydraulic filter and change it according to the manufacturer's recommendations. You can find a cross-reference guide for hydraulic filters here.
  • Wear and Tear Over time, the internal components of the pump will naturally wear down due to friction and stress.
  • Overheating Excessive heat can damage the pump's seals and internal components. Overheating can be caused by low fluid levels, a clogged tractor hydraulic filter, or a malfunctioning radiator or water pump.
  • Leaks External leaks can reduce the amount of hydraulic fluid available to the system, leading to reduced performance. Internal leaks can also occur within the pump, causing a loss of pressure. Check your tractor hydraulic hose for leaks and proper sizing and pressure ratings. Find our guide to hoses here.

Diagnosing a Failing Hydraulic Pump

Before replacing your new holland hydraulic pump, it's important to properly diagnose the issue. Here are some steps you can take

  1. Check the Hydraulic Fluid Level Low fluid levels can cause cavitation and overheating. Consult your owner's manual for the correct fluid type and fill level.
  2. Inspect the Hydraulic Fluid Look for signs of contamination, such as discoloration, cloudiness, or the presence of particles. If the fluid is contaminated, drain and flush the system replace the filter.
  3. Listen for Unusual Noises A knocking, rattling, or whining noise from the pump could indicate cavitation, wear, or damage.
  4. Check Hydraulic Pressure Use a hydraulic pressure gauge to check the pressure at various points in the system. Compare the readings to the specifications in your owner's manual. Low pressure could indicate a failing pump or a problem elsewhere in the system.
  5. Inspect for Leaks Check the pump and all hydraulic lines for leaks. Repair or replace any leaking components. A common area for leaks is around hydraulic cylinders. You can read more about tractor hydraulic cylinders here.

Identifying the Correct Hydraulic Pump

Once you've determined that the pump needs to be replaced, it's crucial to identify the correct replacement. Using the wrong pump can cause serious damage to your tractor. Here's how to find the right one

  • Check Your Owner's Manual The owner's manual should list the correct part number for the hydraulic pump.
  • Locate the Part Number on the Existing Pump Many pumps have a part number stamped or printed on the housing.
  • Consult a Parts Catalog Online parts catalogs, like the one here at Madison Tractor, can help you identify the correct pump based on your tractor's model and serial number.
  • Contact Madison Tractor Our knowledgeable parts experts can help you identify the correct new holland hydraulic pump for your specific tractor.

When searching for a replacement, look for brands that offer quality and reliability. Madison Tractor carries a wide selection of hydraulic pumps for many brands including New Holland, Ford (some older New Hollands may share Ford components - see our Ford Tractor Hydraulic Pump guide), John Deere (John Deere Hydraulic Pump guide), Case IH (Case IH Hydraulic Pump guide), Massey Ferguson (Massey Ferguson Hydraulic Pump guide), Kubota (Kubota Hydraulic Pump guide), Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra Zetor. Don't forget other essential parts when doing hydraulic work such as new filters and gaskets.

Hydraulic Pump Replacement Procedure (General Guide)

WARNING Hydraulic systems operate under high pressure. Before working on any hydraulic system, relieve the pressure by following the procedure outlined in your owner's manual. Failure to do so could result in serious injury.

Disclaimer This is a general guide. Always refer to your tractor's service manual for specific instructions and torque specifications.

  1. Gather Your Tools and Materials You'll need wrenches, sockets, screwdrivers, a hydraulic pressure gauge (optional), a drain pan, new hydraulic fluid the new new holland hydraulic pump.
  2. Park the Tractor on a Level Surface Engage the parking brake and chock the wheels.
  3. Relieve Hydraulic Pressure Follow the procedure in your owner's manual to relieve the hydraulic pressure.
  4. Drain the Hydraulic Fluid Locate the drain plug on the hydraulic reservoir and drain the fluid into a drain pan. Dispose of the used fluid properly.
  5. Disconnect Hydraulic Lines Carefully disconnect the hydraulic lines from the pump. Cap or plug the lines to prevent contamination.
  6. Remove the Old Pump Unbolt the old pump from the tractor.
  7. Install the New Pump Install the new pump, ensuring that it is properly aligned. Use new gaskets or seals as needed.
  8. Connect Hydraulic Lines Connect the hydraulic lines to the new pump, making sure they are properly tightened.
  9. Refill the Hydraulic Fluid Refill the hydraulic reservoir with the correct type and amount of hydraulic fluid.
  10. Bleed the Hydraulic System Follow the procedure in your owner's manual to bleed the hydraulic system. This will remove any air that may have entered the system.
  11. Check for Leaks Start the tractor and check for leaks around the pump and hydraulic lines.
  12. Test the System Operate the hydraulic system to ensure that it is functioning properly.

Specific Models and OEM Part Numbers

  • New Holland TN75DA 87762520
  • New Holland TS110A 87762525

These are just examples, so it is extremely important to verify the correct part number for *your* specific tractor with your New Holland dealer or by cross-referencing the existing part on your tractor.

Hydraulic Fluid and Maintenance

Using the correct hydraulic fluid and following a regular maintenance schedule are essential for prolonging the life of your new holland hydraulic pump and hydraulic system. Consult your owner's manual for the recommended fluid type and maintenance intervals.

Regular maintenance tasks

  • Checking the hydraulic fluid level
  • Inspecting the hydraulic fluid for contamination
  • Replacing the tractor hydraulic filter
  • Checking for leaks

Torque Specifications

Always refer to your tractor's service manual for specific torque specifications. Improperly tightened bolts can lead to leaks or component failure.

Safety Precautions

  • Always relieve hydraulic pressure before working on the hydraulic system.
  • Wear safety glasses to protect your eyes from hydraulic fluid.
  • Use caution when handling hydraulic fluid, as it can be hot and under pressure.
  • Dispose of used hydraulic fluid properly.

Shop New Holland Hydraulic Pumps at Madison Tractor

At Madison Tractor, we're committed to providing you with the highest quality parts and service. We understand that downtime can be costly, which is why we offer a wide selection of new holland hydraulic pumps and other tractor parts, including clutch kits, PTO parts, fuel pumps, injectors, bearings, seals more, to keep your equipment running smoothly. Browse our selection online or contact our knowledgeable parts experts for assistance. We carry parts for New Holland, John Deere, Case IH, Ford, Massey Ferguson, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra Zetor tractors and combines. Get your new holland hydraulic pump today!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →