Massey Ferguson FE135 Tractor Parts
Replacement parts for the Massey Ferguson FE135 Tractor. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Massey Ferguson FE135, manufactured from 1964 to 1975, was a popular utility tractor known for its reliability and versatility. Typically powered by a Perkins diesel engine producing around 45.5 horsepower, with a PTO horsepower around 38 HP, the FE135 was a workhorse on many farms. Its simplicity and robust design made it a favorite for a variety of agricultural tasks.
About the FE135
The Massey Ferguson FE135 became a staple in agriculture after its introduction in 1964, continuing production until 1975. It came equipped with the Perkins AD3.152 diesel engine rated at approximately 45.5 horsepower or a Standard 23C gasoline engine. The diesel engine's 152 cubic inch (2.5L) displacement provided ample power for its size. A manual transmission was standard, offering either 6 forward and 2 reverse gears, or an optional Multi-Power transmission with 12 forward and 4 reverse gears. The independent PTO delivered around 38 horsepower at 540 RPM. The hydraulic system offered a capacity of around 5.5 GPM to operate implements. The 3-point hitch was Category I, with a lift capacity around 2500 lbs. FE135 tractors were commonly used for row crop work, hay baling, livestock feeding, and light tillage. It stood out from other models due to its compact size, fuel efficiency, and dependable Perkins diesel engine, making it a go-to choice for small to medium-sized farms.
FE135 Specifications
| Engine | Perkins AD3.152 45.5 HP Diesel / Standard 23C Gasoline |
|---|---|
| PTO HP | 38 HP @ 540 RPM |
| Transmission | Manual, 6F/2R or 12F/4R (Multi-Power) |
| Hydraulics | 5.5 GPM, 0 remotes |
| 3-Point Hitch | Category I, 2500 lbs lift capacity |
| Fuel Capacity | 14 gallons |
| Weight | 3450 lbs |
| Years Produced | 1964-1975 |
FE135 Maintenance Tips
- Engine Oil & Filter: Change the engine oil and filter every 250 hours of operation using the recommended oil type and a quality filter. Regularly check the oil level to prevent engine damage.
- Hydraulic System: Inspect hydraulic lines and connections for leaks regularly. Change the hydraulic fluid and filter every 500 hours, or annually, to maintain optimal performance and prevent damage to hydraulic components.
- Fuel System: Use clean, high-quality fuel and replace the fuel filter every 300 hours to prevent fuel contamination and ensure smooth engine operation. Drain the fuel sediment bowl regularly.
- Seasonal Storage: Before storing the tractor for the off-season, drain the fuel tank, add fuel stabilizer, and lubricate all grease fittings. Disconnect the battery and store it in a cool, dry place.
FE135 History & Background
The Massey Ferguson FE135 was introduced in 1964 as a replacement for the Ferguson TE20. Throughout its production run, the FE135 remained largely unchanged, a testament to its solid design. Its reliable performance and affordability cemented its place as one of the most popular tractors of its era, significantly impacting agricultural practices worldwide.
Frequently Asked Questions
Which hydraulic pump piston fits the Massey Ferguson FE135?
The Massey Ferguson FE135 uses the 1860038M1 - Piston, Hydraulic Pump. This part is crucial for maintaining proper hydraulic system pressure and function.
Which transmission gasket is used on the Massey Ferguson FE135?
The 181217M3 - Gasket, Transmission Side is a suitable replacement for the Massey Ferguson FE135, ensuring a proper seal for your transmission.
Which steering box seal fits the Massey Ferguson FE135?
For the Massey Ferguson FE135, the 1893623M1 - Seal, Steering Box, Upper & Lower Arm Shaft is an essential replacement part for maintaining steering system integrity.
What are some common replacement parts for the Massey Ferguson FE135?
For routine maintenance and repairs, common parts for the Massey Ferguson FE135 include the 828217M1 - Bolt, Rear Rim Wheel to Disc, an 3640488M1 - Gasket, Exhaust (Steel), the 886727M4 - Carrier, Clutch Bearing, a 183221M1 - Pin, Front Axle, the 898540M91 - Valve, Fuel Tap, and a 180006M91 - Gear Shift Knob.

898104M1 - Air Cleaner Hose
SKU: 898104M1
32 in stock

898254M91 - Pressure Control Valve Hydraulic Diaphragm
SKU: 898254M91
6 in stock

898229M1 - Hydraulic Oil Pressure Standpipe
SKU: 898229M1
5 in stock

897504M1 - Hydraulic Link Roller Pin
SKU: 897504M1
53 in stock

897493M1 - Hydraulic Pump Piston Rings
SKU: 897493M1
1764 in stock

897491M1K - Valve Chamber Assembly
SKU: 897491M1K
29 in stock

828927M92 - Hydraulic Relief Valve
SKU: 828927M92
32 in stock

556602 - Hydraulic Pump Kit
SKU: 556602
4 in stock

521451M1 - Hydraulic Pump Strainer Assembly
SKU: 521451M1
99 in stock

1860038M1 - Hydraulic Pump Piston
SKU: 1860038M1
150 in stock

180933M1 - Hydraulic Lift Pump Follower
SKU: 180933M1
12 in stock

180926M1 - Hydraulic Lift Pump Coupling
SKU: 180926M1
7 in stock

180925M2 - Hydraulic Pump Rear Camblock
SKU: 180925M2
69 in stock

180924M2 - Hydraulic Pump Front Camblock
SKU: 180924M2
89 in stock

1664491M2 - Hydraulic Pump Bushing
SKU: 1664491M2
6 in stock

1000251M1 - Hydraulic Pump Needle Bearing
SKU: 1000251M1
41 in stock

897819M1 - Grille Fastener
SKU: 897819M1
37 in stock

828224M1 - Grille Spring
SKU: 828224M1
17 in stock

194147M1 - Panel
SKU: 194147M1
27 in stock

1882984M92 - Grille Door
SKU: 1882984M92
21 in stock

886366M91 - PTO Drive Shaft (Rear)
SKU: 886366M91
3 in stock

191500M92 - PTO Main Drive Shaft
SKU: 191500M92
31 in stock

1867820M1 - Constant Mesh PTO Gear
SKU: 1867820M1
8 in stock

186581M1 - Mulit-Power PTO Ring
SKU: 186581M1
79 in stock








