Massey Ferguson 290E Tractor Parts
Replacement parts for the Massey Ferguson 290E Tractor. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Massey Ferguson 290e, produced in the late 1980s and early 1990s, became a favorite among farmers for its reliability and straightforward design. Powered by a Perkins diesel engine producing around 77 horsepower, and delivering approximately 65 PTO horsepower, this tractor offered a great balance of power and fuel efficiency for various agricultural tasks. Its robust build and ease of maintenance further contributed to its widespread popularity.
About the 290e
The Massey Ferguson 290e was manufactured from approximately 1987 to 1992, continuing the legacy of dependable utility tractors from Massey Ferguson. It features a Perkins AD4.236 four-cylinder diesel engine, producing around 77 engine horsepower with a displacement of 236 cubic inches. The transmission is typically a mechanical gear transmission with 8 forward and 2 reverse speeds, offering a good range for field work. The independent PTO delivers around 65 horsepower at 540 RPM, suitable for powering a variety of implements. Hydraulic capacity is approximately 8 GPM, with optional auxiliary remotes available. The 3-point hitch is a Category II, providing a lift capacity of around 3500 lbs. The MF 290e found application in row crop operations, hay production, livestock farming, and light tillage work. Compared to smaller models, the 290e offered more power and lifting capacity, while remaining more economical than larger, more complex tractors in the Massey Ferguson lineup. The 'e' designation often indicated a more economically priced or basic version of a similar model, focusing on essential features for practical farm work.
290e Specifications
| Engine | Perkins AD4.236 77 HP Diesel |
|---|---|
| PTO HP | 65 HP @ 540 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 8 GPM, Optional remotes |
| 3-Point Hitch | Category II, 3500 lbs |
| Fuel Capacity | 18 gallons |
| Weight | 6700 lbs |
| Years Produced | 1987-1992 (approx.) |
290e Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 250 hours of operation. Use a high-quality diesel engine oil meeting API CF-4 or better specifications.
- Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours. Use appropriate hydraulic fluid meeting Massey Ferguson specifications.
- Fuel System: Use clean, high-quality diesel fuel. Drain the fuel sediment bowl regularly to remove water and contaminants. Replace the fuel filter annually or every 500 hours.
- Seasonal Storage: Before storing the tractor for extended periods, fill the fuel tank to prevent condensation, add fuel stabilizer, and disconnect the battery. Grease all lubrication points to prevent rust.
290e History & Background
The Massey Ferguson 290e was introduced as a successor to earlier models like the MF 290, providing an updated but still mechanically simple option for farmers. It didn't undergo any major redesigns during its production run, maintaining a consistent focus on reliability and affordability. The 290e played a significant role in providing accessible power for small to medium-sized farms during its time.
Frequently Asked Questions
Which starter motor is recommended for the Massey Ferguson 290e?
For the Massey Ferguson 290e, the 3763362M91 - Starter, Lucas is a suitable replacement.
Which PTO shaft seal fits the Massey Ferguson 290e?
A recommended replacement for the PTO shaft seal on the Massey Ferguson 290e is the 3699801M1 - Seal, PTO Shaft.
Which fuel filter bowl is compatible with the Massey Ferguson 290e?
The 1039071M1 - Bowl, Fuel Filter is designed to fit the Massey Ferguson 290e.
What are common replacement parts for the Massey Ferguson 290e?
Common replacement parts for the Massey Ferguson 290e include the 180579M3 - Boot, Transmission Lever, 881162M2 - Nut, Rear Wheel, 1695447M1 - Key, Ignition, 3640488M1 - Gasket, Exhaust (Steel), 897493M1 - Piston Rings, Hydraulic Pump, and 1669474M1 - Disc, Brake.

ZZ90082 - Crankshaft
SKU: ZZ90082
4 in stock

ZZ90032 - Rocker Shaft
SKU: ZZ90032
2 in stock

ZZ90009 - Connecting Rod
SKU: ZZ90009
51 in stock

VTK406 - 4.236 Valve Train Kit
SKU: VTK406
9 in stock

U5LT0065 - Upper Gasket Set
SKU: U5LT0065
37 in stock

U5LP0009 - Piston
SKU: U5LP0009
18 in stock

U5LB0046 - Lower without Seals Gasket Set
SKU: U5LB0046
13 in stock

U5LB0045 - Lower without Seals Gasket Set
SKU: U5LB0045
39 in stock

898220M91 - Standard Front (RH/LH) Knee Assembly
SKU: 898220M91
2 in stock

886800M92 - Tie Rod Assembly (RH)
SKU: 886800M92
22 in stock

886797M91 - Inner (LH) Tie Rod
SKU: 886797M91
9 in stock

886796M92 - Tie Rod Assembly (LH)
SKU: 886796M92
Out of stock

881736M92 - Tie Rod (RH/LH)
SKU: 881736M92
110 in stock

553326 - Complete Tie Rod Assembly (RH)
SKU: 553326
20 in stock

553325 - Complete Tie Rod Assembly (LH)
SKU: 553325
26 in stock

553324 - Complete Tie Rod Assembly (RH)
SKU: 553324
24 in stock

553323 - Complete Tie Rod Assembly (LH)
SKU: 553323
17 in stock

523387M1 - Axle Lock Bolt w/ Shoulder
SKU: 523387M1
52 in stock

192928M1 - Jam Nut
SKU: 192928M1
350 in stock

1028099M91 - Inner (LH) Tube
SKU: 1028099M91
160 in stock

1028098M91 - Inner (LH) Tie Rod
SKU: 1028098M91
117 in stock

3641363M91 - Water Pump
SKU: 3641363M91
43 in stock

3637468M91 - Water Pump
SKU: 3637468M91
40 in stock

3984-P - Tapered Roller Bearing Cone
SKU: 3984-P
31 in stock








