Industrial V-Belt Size Chart: Identify Sections & Lengths
Identify common V-belt sections and length markings. Compare classical, fractional-horsepower, narrow-wedge, cogged and metric profiles before choosing a replacement.
A useful V-belt size chart does more than compare lengths. First identify the belt section and its matching sheave groove; then confirm the length code and construction. A belt marked A, AX, SPA or 4L may look similar at a glance, but those markings describe different profiles or standards.
Identify the V-belt section
Use these nominal cross-section dimensions as an identification aid. Measure both the top width and depth; several families share one dimension, and a matching width alone does not prove fit.
| Profile family | Nominal top width | Nominal depth | Marking examples |
|---|---|---|---|
| Classical | A: 1/2 in; B: 5/8 in; C: 7/8 in; D: 1-1/4 in | A: 5/16 in; B: 13/32 in; C: 17/32 in; D: 3/4 in | A, B, C, D |
| Cogged classical | AX: 1/2 in; BX: 5/8 in; CX: 7/8 in | AX: 5/16 in; BX: 13/32 in; CX: 17/32 in | AX, BX, CX |
| Narrow wedge | 3V: 3/8 in; 5V: 5/8 in; 8V: 1 in | 3V: 5/16 in; 5V: 17/32 in; 8V: 7/8 in | 3V, 5V, 8V |
| Cogged narrow wedge | 3VX: 3/8 in; 5VX: 5/8 in; 8VX: 1 in | 3VX: 5/16 in; 5VX: 17/32 in; 8VX: 7/8 in | 3VX, 5VX, 8VX |
| FHP / light duty | 3L: 3/8 in; 4L: 1/2 in; 5L: 21/32 in | 3L: 7/32 in; 4L: 5/16 in; 5L: 3/8 in | 3L, 4L, 5L |
Dimensions are nominal. A cogged suffix X changes construction, and FHP belts are built for their intended light-duty drives; do not substitute by dimensions alone. Confirm sheave profile and the equipment specification.
Clean the belt and record the full marking before measuring. If it is unreadable, measure the top width and height with calipers and compare those dimensions with the correct standard chart. Also inspect the pulley groove: a worn belt can narrow, while a worn sheave can change how it seats.
| Marking family | Examples stocked | What to verify |
|---|---|---|
| Classical wrapped | A, B, C, D | Letter section, length series and sheave groove. |
| Fractional horsepower | 3L, 4L, 5L | FHP profile and its length designation; do not assume it is the same as a classical section. |
| Narrow wedge | 3V, 5V, 8V | Narrow-wedge sheave profile and the exact belt length. |
| Cogged classical/wedge | AX, BX, CX, 3VX, 5VX | Cogged construction plus the corresponding A/B/C or 3V/5V section. |
| Metric wedge | SPA, SPB, SPC, SPZ | Metric section and metric datum/effective length. |
For example, the stocked A40 is a classical A-section belt; AX60 is a cogged A-section counterpart; and SPA1950 belongs to a metric wedge family. Those codes are not interchangeable without checking the sheave and the equipment specification.
Read belt length correctly
Length markings may refer to inside, outside or datum/effective length, depending on belt family and standard. A tape measure around a worn belt gives an approximate circumference—not necessarily the nominal length printed in the part number. When possible, use the complete belt code or the equipment manufacturer’s part number to cross-reference.
Measure an unmarked belt
- Measure the top width and height to narrow down the section.
- Measure the old belt circumference with a belt-length tool or flexible tape, without stretching it.
- Record rib count for Poly-V belts and width/profile for variable-speed belts.
- Compare the result with the proper profile-specific chart and check pulley condition.
Shop by belt section
Browse A-section wrapped belts, AX cogged belts, SPA metric belts or all Industrial Belts. If your marking is unusual, compare the complete code—not just the number after the profile letter.
Recommended Parts for This Guide
3 parts we recommend — in stock, ships fast, one-click add to cart.
V-belt size chart FAQs
Does the belt number always state its exact outside length?
No. The length basis varies by belt series. Use the correct standard and confirm whether a marking represents inside, outside or datum/effective length.
Can I choose a replacement by width alone?
No. Match the section, sheave groove, construction and length. Width alone cannot confirm fit.
Part of our comprehensive guide
Industrial Belt Selection Guide: Types, Sizes & Applications










