Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Small Engine Valve Springs & Keepers: Briggs & Kohler

Valve springs and keepers are critical components in your small engine. Learn how to identify problems, safely replace them, and keep your equipment running smoothly. We cover Briggs & Stratton and Kohler engines, common on John Deere, Craftsman, Cub Cadet, and more.

Introduction to Small Engine Valve springs & keepers

Valve springs and keepers are essential parts of your small engine's valve train, responsible for ensuring the valves open and close at the correct times. Over time, these components can wear out or break, leading to poor engine performance or even complete engine failure. This guide will walk you through the basics of valve springs and keepers, common problems, and how to replace them on Briggs & Stratton and Kohler engines, found in many machines from John Deere to Craftsman to Cub Cadet.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

This article is part of our series on Engine & Fuel System Parts. Be sure to check out the other articles for a complete understanding of your small engine's operation and maintenance.

What Valve Springs and Keepers Do

Valve springs exert a force that closes the valves after they've been opened by the camshaft. This ensures a tight seal between the valve and the valve seat, preventing combustion gases from escaping. The keepers (also called valve locks) are small, wedge-shaped pieces that secure the valve spring retainer to the valve stem. They fit into a groove on the valve stem and lock the retainer in place.

Common Problems with Valve Springs and Keepers

Several issues can arise with valve springs and keepers:

  • Broken Valve Spring: A broken spring will prevent the valve from closing properly, leading to loss of compression, misfires, and potentially damage to other engine components.
  • Weakened Valve Spring: Over time, valve springs can lose their tension, resulting in valve float (the valve doesn't close quickly enough at high RPMs).
  • Worn Keepers: Keepers can wear down or become damaged, leading to slippage and eventual valve train failure.
  • Lost Keepers: Sometimes keepers can pop out, especially if the valve train is worn or if the engine experiences excessive vibration.

Symptoms of Failing Valve Springs or Keepers

Recognizing the signs of failing valve springs or keepers can help you prevent more serious engine damage. Common symptoms include:

  • Loss of Power: A noticeable decrease in engine power, especially under load.
  • Misfiring: The engine may run rough or skip, particularly at higher RPMs.
  • Backfiring: Explosions in the exhaust or intake can indicate valve timing issues.
  • Excessive Engine Noise: Unusual ticking or rattling sounds from the valve train area.
  • Hard Starting: Difficulty starting the engine, especially when cold.

Inspecting Valve Springs and Keepers

Regular inspection is crucial for maintaining your small engine. Here's how to inspect valve springs and keepers:

  1. Safety First: Disconnect the spark plug wire and ensure the engine is cool before starting any inspection or repair work.
  2. Access the Valve Train: Remove the valve cover to expose the valve springs and keepers. The specific procedure will vary depending on your engine model (Briggs & Stratton, Kohler, etc.).
  3. Visual Inspection: Look for broken or cracked springs, worn or damaged keepers, and any signs of excessive wear or corrosion.
  4. Spring Tension Test: If possible, use a valve spring tester to check the spring's tension. Compare the reading to the manufacturer's specifications.

Replacing Valve Springs and Keepers

Replacing valve springs and keepers requires some mechanical skill, but it's a task most homeowners can tackle. Here's a general guide:

  1. Gather Your Tools and Parts: You'll need a valve spring compressor tool, new valve springs and keepers, a small magnet, needle-nose pliers, and basic hand tools. Madison Tractor Company carries a wide selection of valve springs and keepers for Briggs & Stratton and Kohler engines. You can find the parts you need by searching our Briggs & Stratton parts or Kohler parts.
  2. Compress the Valve Spring: Position the valve spring compressor tool over the valve spring and compress the spring until the keepers are exposed.
  3. Remove the Keepers: Use a small magnet or needle-nose pliers to carefully remove the keepers. They can be small and easily lost.
  4. Remove the Valve Spring and Retainer: Once the keepers are removed, you can remove the valve spring and retainer.
  5. Install the New Valve Spring and Retainer: Place the new valve spring and retainer in position.
  6. Compress the New Valve Spring: Use the valve spring compressor to compress the new spring.
  7. Install the new keepers: Carefully install the new keepers into the groove on the valve stem. Ensure they are properly seated and securely hold the retainer.
  8. Release the Valve Spring Compressor: Slowly release the valve spring compressor tool, allowing the spring to exert pressure on the keepers.
  9. Verify Keeper Seating: Double-check that the keepers are properly seated and securely holding the retainer. A slight tap with a soft-faced hammer can help seat them.
  10. Reassemble and Test: Reinstall the valve cover and spark plug wire. Start the engine and listen for any unusual noises. Check for proper engine performance.

Safety Warning: Valve springs are under considerable pressure. Always use a valve spring compressor tool to safely compress and release them. Never attempt to remove or install valve springs without the proper tool.

Pro Tip: When replacing valve springs, it's a good idea to inspect the valve seats for wear or damage. If necessary, you may need to lap the valves to ensure a proper seal.

Valve Springs for Briggs & Stratton and Kohler Engines

Madison Tractor Company carries valve springs and keepers for a wide range of small engines, including Briggs & Stratton and Kohler. We also carry parts for other popular brands like Kawasaki and Honda. Whether you own a John Deere lawn tractor, a Craftsman riding mower, a Cub Cadet zero-turn, a Husqvarna chainsaw, a Toro snow blower, an Ariens snow thrower, a Murray go-kart, a Hustler mower, a Scag commercial mower, an Exmark mower, a Ferris mower, a Snapper rear engine rider, a Simplicity tractor, or a Dixie Chopper, we can help you find the correct parts. Here are some links to popular carburetor part pages, which you might need when performing engine work:

When ordering parts, be sure to have your engine model number handy. This will ensure you get the correct valve springs and keepers for your specific engine. We also stock a full range of other parts, including belts, blades, spindles, pulleys, filters, spark plugs, bearings and shear pins.

Conclusion

Maintaining your small engine's valve springs and keepers is essential for ensuring optimal performance and longevity. By understanding the function of these components, recognizing common problems, and performing regular inspections and replacements, you can keep your equipment running smoothly for years to come.

Need valve springs, keepers, or other engine parts? Shop Madison Tractor Company for a wide selection of quality parts at competitive prices. Our knowledgeable staff is here to help you find the right parts for your needs. Visit our website today to browse our online catalog and place your order! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.