Case IH 1456 Tractor Parts
1456 parts and accessories
The Case IH 1456 tractor, manufactured from 1969 to 1971, was a powerful and reliable workhorse on American farms. It featured an International Harvester DT-402 diesel engine producing around 146 horsepower and boasting a robust 120 PTO horsepower. Its combination of power and durability made the 1456 a popular choice for farmers tackling heavy tillage and demanding fieldwork.
The Case IH 1456 was produced between 1969 and 1971, building on the success of its predecessors in the International Harvester lineup. It was designed as a row-crop tractor, capable of handling a wide range of tasks. The 1456 is powered by an International Harvester DT-402 inline 6-cylinder diesel engine, displacing 402 cubic inches and delivering approximately 146 engine horsepower. This engine was known for its reliability and lugging ability. The tractor was offered with a gear-type transmission, providing 8 forward and 2 reverse speeds. The independent PTO delivered around 120 horsepower, available in both 540 and 1000 RPM configurations. The hydraulic system had a capacity of approximately 15 gallons per minute (GPM) with typically 2 remote valves. It was equipped with a Category II 3-point hitch. Farmers primarily used the 1456 for row crop operations like plowing, disking, planting, and cultivating. It was also suited for hay baling, livestock feeding, and general tillage. The 1456 distinguished itself from other models with its larger engine and increased horsepower, making it suitable for larger farms and heavier workloads.
Specifications
| Engine | International Harvester DT-402 146 HP Diesel |
|---|---|
| PTO HP | 120 HP @ 540/1000 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 15 GPM, 2 remotes |
| 3-Point Hitch | Category II, 6,200 lbs lift capacity |
| Fuel Capacity | 38 gallons |
| Weight | 11,635 lbs |
| Years Produced | 1969-1971 |
Maintenance Tips
- Engine Oil & Filter: Change your engine oil and filter every 250 hours of operation, using a high-quality oil that meets or exceeds the manufacturer's specifications. Regularly check oil levels.
- Hydraulic System: Inspect hydraulic fluid levels and filters regularly. Change the hydraulic fluid and filter every 500 hours of operation, or more frequently if the oil appears dirty or contaminated.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours. Drain any water or sediment from the fuel tank regularly. Consider a fuel additive for cold weather operation and to prevent gelling.
- Seasonal Storage: Before storing your tractor for the winter, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.
History & Background
The Case IH 1456 was introduced in 1969 as a part of International Harvester's line of powerful row-crop tractors. It represented a significant step up in horsepower and capability compared to earlier models. While it wasn't drastically redesigned during its short production run, the 1456 left a lasting impact as a dependable and strong tractor, contributing to the modernization of farming practices.
Frequently Asked Questions
What engine is in the Case Ih 1456?
The Case IH 1456 is powered by an International Harvester DT-402 6-cylinder diesel engine producing approximately 146 horsepower.
What is the PTO horsepower on a 1456?
The PTO horsepower rating on the Case IH 1456 is approximately 120 horsepower, available in both 540 and 1000 RPM configurations.
What oil filter fits the 1456?
Common oil filter cross-references for the Case IH 1456 include IH part number 313554R91, Fleetguard LF670, and Wix 51794. Always verify fitment with your parts supplier.
What are common parts needed for the 1456?
Common parts needed for the Case IH 1456 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic cylinder seal kits, steering components (tie rod ends, steering cylinders), and clutch components (disc, pressure plate, throwout bearing).

71785SPO - (1) TAPER-LOK Complete Spindle only
SKU: 71785SPO
Out of stock

71785SAR - (1) RH Steering Arm for TAPER-LOK Spindle
SKU: 71785SAR
39 in stock

71785SAL - (1) LH Steering Arm for TAPER-LOK Spindle
SKU: 71785SAL
161 in stock

71785HD - Steering (RH/LH) Spindle
SKU: 71785HD
61 in stock

71785C92 - Spindle (RH/LH)
SKU: 71785C92
101 in stock

65320C1 - axle pivot Ref 16 - Ball
SKU: 65320C1
487 in stock

60763DB - Stay Rod Cap
SKU: 60763DB
Out of stock

60762D - Stay Rod Cap Shim
SKU: 60762D
150 in stock

535861R1 - Stay Rod Socket
SKU: 535861R1
26 in stock

48703D - Hub Wear Sleeve
SKU: 48703D
81 in stock

427546 - Spindle Jam Nut
SKU: 427546
387 in stock

400395R1 - Base; Steering Cap Plate Assembly
SKU: 400395R1
302 in stock

391824R11 - Front Wheel (8 Bolt) Hub
SKU: 391824R11
37 in stock

391823R11 - Front Wheel (6 Bolt) Hub
SKU: 391823R11
39 in stock

385156R1 - Steering Wheel
SKU: 385156R1
164 in stock

384017R3 - Steering Arm (RH)
SKU: 384017R3
22 in stock

384016R3 - Steering Arm (LH)
SKU: 384016R3
39 in stock

384006R92 - Inner Tie Rod
SKU: 384006R92
1341 in stock

383914R1 - RH/LH Steering Arm
SKU: 383914R1
72 in stock

379941R1 - 1 1/2" Dia. Bolster Pivot Pin
SKU: 379941R1
37 in stock

370254R91 - Seal
SKU: 370254R91
106 in stock

369860R1 - HUB CAP GASKET
SKU: 369860R1
1754 in stock

359984R93 - Outer Tie Rod
SKU: 359984R93
448 in stock

358978R2 - 1 1/4"Dia. Bolster Pivot Pin
SKU: 358978R2
94 in stock
