Case IH 1456 Tractor Parts
1456 parts and accessories
The Case IH 1456 tractor, manufactured from 1969 to 1971, was a powerful and reliable workhorse on American farms. It featured an International Harvester DT-402 diesel engine producing around 146 horsepower and boasting a robust 120 PTO horsepower. Its combination of power and durability made the 1456 a popular choice for farmers tackling heavy tillage and demanding fieldwork.
The Case IH 1456 was produced between 1969 and 1971, building on the success of its predecessors in the International Harvester lineup. It was designed as a row-crop tractor, capable of handling a wide range of tasks. The 1456 is powered by an International Harvester DT-402 inline 6-cylinder diesel engine, displacing 402 cubic inches and delivering approximately 146 engine horsepower. This engine was known for its reliability and lugging ability. The tractor was offered with a gear-type transmission, providing 8 forward and 2 reverse speeds. The independent PTO delivered around 120 horsepower, available in both 540 and 1000 RPM configurations. The hydraulic system had a capacity of approximately 15 gallons per minute (GPM) with typically 2 remote valves. It was equipped with a Category II 3-point hitch. Farmers primarily used the 1456 for row crop operations like plowing, disking, planting, and cultivating. It was also suited for hay baling, livestock feeding, and general tillage. The 1456 distinguished itself from other models with its larger engine and increased horsepower, making it suitable for larger farms and heavier workloads.
Specifications
| Engine | International Harvester DT-402 146 HP Diesel |
|---|---|
| PTO HP | 120 HP @ 540/1000 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 15 GPM, 2 remotes |
| 3-Point Hitch | Category II, 6,200 lbs lift capacity |
| Fuel Capacity | 38 gallons |
| Weight | 11,635 lbs |
| Years Produced | 1969-1971 |
Maintenance Tips
- Engine Oil & Filter: Change your engine oil and filter every 250 hours of operation, using a high-quality oil that meets or exceeds the manufacturer's specifications. Regularly check oil levels.
- Hydraulic System: Inspect hydraulic fluid levels and filters regularly. Change the hydraulic fluid and filter every 500 hours of operation, or more frequently if the oil appears dirty or contaminated.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours. Drain any water or sediment from the fuel tank regularly. Consider a fuel additive for cold weather operation and to prevent gelling.
- Seasonal Storage: Before storing your tractor for the winter, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.
History & Background
The Case IH 1456 was introduced in 1969 as a part of International Harvester's line of powerful row-crop tractors. It represented a significant step up in horsepower and capability compared to earlier models. While it wasn't drastically redesigned during its short production run, the 1456 left a lasting impact as a dependable and strong tractor, contributing to the modernization of farming practices.
Frequently Asked Questions
What engine is in the Case Ih 1456?
The Case IH 1456 is powered by an International Harvester DT-402 6-cylinder diesel engine producing approximately 146 horsepower.
What is the PTO horsepower on a 1456?
The PTO horsepower rating on the Case IH 1456 is approximately 120 horsepower, available in both 540 and 1000 RPM configurations.
What oil filter fits the 1456?
Common oil filter cross-references for the Case IH 1456 include IH part number 313554R91, Fleetguard LF670, and Wix 51794. Always verify fitment with your parts supplier.
What are common parts needed for the 1456?
Common parts needed for the Case IH 1456 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic cylinder seal kits, steering components (tie rod ends, steering cylinders), and clutch components (disc, pressure plate, throwout bearing).

358970R1 - Center Steering Arm
SKU: 358970R1
56 in stock

358958R2 - Upright Spindle Bushing
SKU: 358958R2
79 in stock

358958R1 - Spindle Bushing
SKU: 358958R1
79 in stock

185106C1 - Thrust Bearing
SKU: 185106C1
1052 in stock

15943DA - Felt Washer
SKU: 15943DA
1008 in stock

701335C92 - Water w/ Hub Pump
SKU: 701335C92
187 in stock

684739C1 - Thermostat (190°)
SKU: 684739C1
112 in stock

619736C2 - Thermostat (180°)
SKU: 619736C2
48 in stock

532673R1 - Radiator (9 lb.) Cap
SKU: 532673R1
41 in stock

391932R1 - Upper Radiator Hose
SKU: 391932R1
91 in stock

386860R91 - Radiator
SKU: 386860R91
89 in stock

385120R2 - Fan Belt
SKU: 385120R2
112 in stock

380448R2 - Lower Radiator Hose
SKU: 380448R2
Out of stock

378710R91 - Radiator Mounting Plate Bracket
SKU: 378710R91
434 in stock

N159763 - PTO seals & O-ring greaseable release brg Seal Kit Incls: pilot brg
SKU: N159763
54 in stock

N158563 - PTO seals & O-ring sealed release brg Seal Kit Incls: pilot brg
SKU: N158563
3 in stock

69789C91 - Release (sealed) Bearing
SKU: 69789C91
643 in stock

67600C1 - spring loaded 8-button Trans Disc: 14"
SKU: 67600C1
8 in stock

67597C92 - hvy duty springs 1.938" flywheel 15 spring 3 lever Pressure Plate: 14"
SKU: 67597C92
Out of stock

67597-R - (w/ 1.938flywheel step) & 15 springs 3 levers Re-mfg Pressure Plate: 14"
SKU: 67597-R
5 in stock

626206R1 - Clutch / Brake Pedal Return Spring
SKU: 626206R1
116 in stock

524598R1 - Pilot Bearing
SKU: 524598R1
707 in stock

393117R93 - spring loaded 6-button Trans Disc: 14"
SKU: 393117R93
12 in stock

390254R94 - 1.938" flywheel 15 spring 3 lever Pressure Plate: 14"
SKU: 390254R94
25 in stock
