Case IH 1456 Tractor Parts
1456 parts and accessories
The Case IH 1456 tractor, manufactured from 1969 to 1971, was a powerful and reliable workhorse on American farms. It featured an International Harvester DT-402 diesel engine producing around 146 horsepower and boasting a robust 120 PTO horsepower. Its combination of power and durability made the 1456 a popular choice for farmers tackling heavy tillage and demanding fieldwork.
The Case IH 1456 was produced between 1969 and 1971, building on the success of its predecessors in the International Harvester lineup. It was designed as a row-crop tractor, capable of handling a wide range of tasks. The 1456 is powered by an International Harvester DT-402 inline 6-cylinder diesel engine, displacing 402 cubic inches and delivering approximately 146 engine horsepower. This engine was known for its reliability and lugging ability. The tractor was offered with a gear-type transmission, providing 8 forward and 2 reverse speeds. The independent PTO delivered around 120 horsepower, available in both 540 and 1000 RPM configurations. The hydraulic system had a capacity of approximately 15 gallons per minute (GPM) with typically 2 remote valves. It was equipped with a Category II 3-point hitch. Farmers primarily used the 1456 for row crop operations like plowing, disking, planting, and cultivating. It was also suited for hay baling, livestock feeding, and general tillage. The 1456 distinguished itself from other models with its larger engine and increased horsepower, making it suitable for larger farms and heavier workloads.
Specifications
| Engine | International Harvester DT-402 146 HP Diesel |
|---|---|
| PTO HP | 120 HP @ 540/1000 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 15 GPM, 2 remotes |
| 3-Point Hitch | Category II, 6,200 lbs lift capacity |
| Fuel Capacity | 38 gallons |
| Weight | 11,635 lbs |
| Years Produced | 1969-1971 |
Maintenance Tips
- Engine Oil & Filter: Change your engine oil and filter every 250 hours of operation, using a high-quality oil that meets or exceeds the manufacturer's specifications. Regularly check oil levels.
- Hydraulic System: Inspect hydraulic fluid levels and filters regularly. Change the hydraulic fluid and filter every 500 hours of operation, or more frequently if the oil appears dirty or contaminated.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours. Drain any water or sediment from the fuel tank regularly. Consider a fuel additive for cold weather operation and to prevent gelling.
- Seasonal Storage: Before storing your tractor for the winter, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.
History & Background
The Case IH 1456 was introduced in 1969 as a part of International Harvester's line of powerful row-crop tractors. It represented a significant step up in horsepower and capability compared to earlier models. While it wasn't drastically redesigned during its short production run, the 1456 left a lasting impact as a dependable and strong tractor, contributing to the modernization of farming practices.
Frequently Asked Questions
What engine is in the Case Ih 1456?
The Case IH 1456 is powered by an International Harvester DT-402 6-cylinder diesel engine producing approximately 146 horsepower.
What is the PTO horsepower on a 1456?
The PTO horsepower rating on the Case IH 1456 is approximately 120 horsepower, available in both 540 and 1000 RPM configurations.
What oil filter fits the 1456?
Common oil filter cross-references for the Case IH 1456 include IH part number 313554R91, Fleetguard LF670, and Wix 51794. Always verify fitment with your parts supplier.
What are common parts needed for the 1456?
Common parts needed for the Case IH 1456 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic cylinder seal kits, steering components (tie rod ends, steering cylinders), and clutch components (disc, pressure plate, throwout bearing).

406248R2 - Rear (6.125" long) Yoke
SKU: 406248R2
114 in stock

406247R1 - Stud (1.250" dia.)
SKU: 406247R1
62 in stock

398378R1 - Leveling Screw (RH/LH) Assembly
SKU: 398378R1
60 in stock

397066R1 - Drawbar
SKU: 397066R1
28 in stock

392204R1 - Center Link Handle
SKU: 392204R1
88 in stock

392195R1 - Rear Stabilizer Eyebolt
SKU: 392195R1
91 in stock

392185R1 - Front Stabilizer Eyebolt
SKU: 392185R1
64 in stock

392183R1 - Stabilizer Control Arm
SKU: 392183R1
33 in stock

391988R91 - Front Assembly Tube
SKU: 391988R91
43 in stock

389428R1 - Front Drawbar Pin
SKU: 389428R1
103 in stock

383363R11 - Lockout Pin
SKU: 383363R11
20 in stock

382193R1 - Upper Latch Spring
SKU: 382193R1
140 in stock

382192R1 - Lower Latch Spring
SKU: 382192R1
191 in stock

223353 - Drawbar w/ Hammerstrap Holes
SKU: 223353
32 in stock

223352 - Drawbar
SKU: 223352
26 in stock

223351 - Drawbar
SKU: 223351
18 in stock

1981986C1 - Center Link End (Front - RH Thread)
SKU: 1981986C1
68 in stock

1954221C3 - Center Link Body
SKU: 1954221C3
56 in stock

1331863C2 - Center Link Handle
SKU: 1331863C2
38 in stock

1331854C2 - Center Link Assembly (Cat III)
SKU: 1331854C2
Out of stock

1286840C7 - Pin Assembly
SKU: 1286840C7
29 in stock

1282063C2 - Center Link End (Rear - LH Threads)
SKU: 1282063C2
73 in stock

1272681C1 - Front Lower Link Ball Bushing
SKU: 1272681C1
95 in stock

LF563J - Cartridge (QTY 1) Lube Filter
SKU: LF563J
Out of stock
