(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 1456 Tractor Parts

1456 parts and accessories

The Case IH 1456 tractor, manufactured from 1969 to 1971, was a powerful and reliable workhorse on American farms. It featured an International Harvester DT-402 diesel engine producing around 146 horsepower and boasting a robust 120 PTO horsepower. Its combination of power and durability made the 1456 a popular choice for farmers tackling heavy tillage and demanding fieldwork.

The Case IH 1456 was produced between 1969 and 1971, building on the success of its predecessors in the International Harvester lineup. It was designed as a row-crop tractor, capable of handling a wide range of tasks. The 1456 is powered by an International Harvester DT-402 inline 6-cylinder diesel engine, displacing 402 cubic inches and delivering approximately 146 engine horsepower. This engine was known for its reliability and lugging ability. The tractor was offered with a gear-type transmission, providing 8 forward and 2 reverse speeds. The independent PTO delivered around 120 horsepower, available in both 540 and 1000 RPM configurations. The hydraulic system had a capacity of approximately 15 gallons per minute (GPM) with typically 2 remote valves. It was equipped with a Category II 3-point hitch. Farmers primarily used the 1456 for row crop operations like plowing, disking, planting, and cultivating. It was also suited for hay baling, livestock feeding, and general tillage. The 1456 distinguished itself from other models with its larger engine and increased horsepower, making it suitable for larger farms and heavier workloads.

Specifications

EngineInternational Harvester DT-402 146 HP Diesel
PTO HP120 HP @ 540/1000 RPM
TransmissionGear 8F/2R
Hydraulics15 GPM, 2 remotes
3-Point HitchCategory II, 6,200 lbs lift capacity
Fuel Capacity38 gallons
Weight11,635 lbs
Years Produced1969-1971

Maintenance Tips

  • Engine Oil & Filter: Change your engine oil and filter every 250 hours of operation, using a high-quality oil that meets or exceeds the manufacturer's specifications. Regularly check oil levels.
  • Hydraulic System: Inspect hydraulic fluid levels and filters regularly. Change the hydraulic fluid and filter every 500 hours of operation, or more frequently if the oil appears dirty or contaminated.
  • Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours. Drain any water or sediment from the fuel tank regularly. Consider a fuel additive for cold weather operation and to prevent gelling.
  • Seasonal Storage: Before storing your tractor for the winter, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.

History & Background

The Case IH 1456 was introduced in 1969 as a part of International Harvester's line of powerful row-crop tractors. It represented a significant step up in horsepower and capability compared to earlier models. While it wasn't drastically redesigned during its short production run, the 1456 left a lasting impact as a dependable and strong tractor, contributing to the modernization of farming practices.

Frequently Asked Questions

What engine is in the Case Ih 1456?

The Case IH 1456 is powered by an International Harvester DT-402 6-cylinder diesel engine producing approximately 146 horsepower.

What is the PTO horsepower on a 1456?

The PTO horsepower rating on the Case IH 1456 is approximately 120 horsepower, available in both 540 and 1000 RPM configurations.

What oil filter fits the 1456?

Common oil filter cross-references for the Case IH 1456 include IH part number 313554R91, Fleetguard LF670, and Wix 51794. Always verify fitment with your parts supplier.

What are common parts needed for the 1456?

Common parts needed for the Case IH 1456 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic cylinder seal kits, steering components (tie rod ends, steering cylinders), and clutch components (disc, pressure plate, throwout bearing).

Showing 193-216 of 323 products
65479C1 - Starter Solenoid

65479C1 - Starter Solenoid

SKU: 65479C1

$39.51

99 in stock

65302C1 - Voltage Regulator (12 Volt)

65302C1 - Voltage Regulator (12 Volt)

SKU: 65302C1

$26.39

163 in stock

403571R2 - Light Switch
Out of Stock

403571R2 - Light Switch

SKU: 403571R2

$56.19

Out of stock

397940R93 - Push Button; Ether Solenoid/Horn Switch

397940R93 - Push Button; Ether Solenoid/Horn Switch

SKU: 397940R93

$13.36

89 in stock

393328R93 - Tachometer Cable

393328R93 - Tachometer Cable

SKU: 393328R93

$41.88

89 in stock

393209R1 - Start/Glow Plug/Horn Push Button Switch

393209R1 - Start/Glow Plug/Horn Push Button Switch

SKU: 393209R1

$13.18

174 in stock

378427R94 - Stewart Warner Replacement Fuel Sending Unit

378427R94 - Stewart Warner Replacement Fuel Sending Unit

SKU: 378427R94

$74.04

128 in stock

366317R93 - Push Button Switch

366317R93 - Push Button Switch

SKU: 366317R93

$8.43

285 in stock

3129031R91 - Oil Pressure Sender Switch

3129031R91 - Oil Pressure Sender Switch

SKU: 3129031R91

$16.63

232 in stock

28A110 - 12 Volt 4409X Sealed Beam

28A110 - 12 Volt 4409X Sealed Beam

SKU: 28A110

$29.29

46 in stock

1960481 - Alternator Pulley

1960481 - Alternator Pulley

SKU: 1960481

$180.40

8 in stock

1651487C1 - STARTER DRIVE

1651487C1 - STARTER DRIVE

SKU: 1651487C1

$38.89

9 in stock

121629C3 - Neutral Safety Switch

121629C3 - Neutral Safety Switch

SKU: 121629C3

$43.68

35 in stock

1115510 - SOLENOID SWITCH

1115510 - SOLENOID SWITCH

SKU: 1115510

$39.51

99 in stock

1113647 - RE-MFG. STARTER

1113647 - RE-MFG. STARTER

SKU: 1113647

$900.69

49 in stock

1100805 - Delco Alternator
Out of Stock

1100805 - Delco Alternator

SKU: 1100805

$172.71

Out of stock

67693C1 - Pivot Pin

67693C1 - Pivot Pin

SKU: 67693C1

$42.28

13 in stock

57654D - Front Drawbar Pin

57654D - Front Drawbar Pin

SKU: 57654D

$17.22

111 in stock

523861R2 - Crank Handle

523861R2 - Crank Handle

SKU: 523861R2

$14.57

42 in stock

522246R1 - Used In Front or Rear Yoke Pin

522246R1 - Used In Front or Rear Yoke Pin

SKU: 522246R1

$5.24

131 in stock

49B51 - leveling screw Housing

SKU: 49B51

$145.94

41 in stock

406686R2 - Lower Pull Arm Front Pin

406686R2 - Lower Pull Arm Front Pin

SKU: 406686R2

$33.13

65 in stock

406250R1 - Complete Sway Limiter Assembly

406250R1 - Complete Sway Limiter Assembly

SKU: 406250R1

$147.28

46 in stock

406249R1 - Front (3.980" long) Yoke

406249R1 - Front (3.980" long) Yoke

SKU: 406249R1

$70.25

172 in stock