Snow Blower Carburetor: Replacement by Engine Model
Is your snow blower refusing to start or running rough? A faulty carburetor is a common culprit. This guide helps you diagnose carburetor problems and find the right replacement based on your snow blower's engine model.
Introduction to Snow Blower Carburetors
The carburetor is a vital component of your snow blower's engine. It's responsible for mixing air and fuel in the correct ratio to ensure efficient combustion. Over time, carburetors can become clogged with old fuel residue, dirt, or other debris, leading to performance issues. Common symptoms of a bad snow blower carburetor include:
Recommended Parts for This Guide
10 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
- Difficulty starting the engine
- Rough or erratic idling
- Loss of power under load
- Black smoke emitting from the exhaust
- Fuel leakage
While cleaning a carburetor is sometimes possible, replacement is often the most reliable solution, especially for older or heavily damaged units. This guide will help you identify the correct snow blower carburetor for your machine based on its engine model. Replacing your snow blower's carburetor can be more cost-effective than replacing the entire machine. Keep your machine running smoothly during the winter months with a properly functioning carburetor. Remember to shop snow blower parts before the next big snowfall!
Finding Your Engine Model Number
Locating your engine model number is the crucial first step. The engine model number is typically stamped directly onto the engine. Look for a sticker or plate on the engine block. Common locations include:
- On top of the valve cover
- On the side of the engine block, near the spark plug
- On the back of the engine, near the starter
The engine model number will usually consist of a series of numbers and letters, such as "123456-7890-01." Once you have this number, you can use it to identify the correct snow blower carburetor for your engine.
If you have an Ariens snowblower, finding your model and serial number is also important. You may find more information about Ariens part numbers in this Ariens snowblower parts article.
Common Engine Brands and Carburetor Identification
Several engine manufacturers are commonly found in snow blowers. Here's how to identify carburetors for some of the most popular brands:
Briggs & Stratton Carburetors
Briggs & Stratton is a very common engine found in many snow blowers, including those made by Craftsman, Murray, and many others. Briggs & Stratton carburetors vary depending on the engine series. Once you have your engine model number, you can use the Briggs & Stratton parts lookup tool on their website or at Madison Tractor to find the correct carburetor. Briggs & Stratton engine parts are readily available.
Important Note: Briggs & Stratton engines often have a date code stamped near the model number. This date code can be helpful in identifying the correct carburetor, especially if there have been design changes during the production run.
Tecumseh Carburetors
Tecumseh engines were once very popular in snow blowers, but are less common today. They can still be found in older machines from brands like Toro, Craftsman, and Ariens. Finding parts for these engines can be more challenging, but Madison Tractor carries many replacement parts. Again, the engine model number is critical for identifying the correct carburetor.
Tip: When searching for Tecumseh carburetors, pay close attention to the carburetor's mounting style (e.g., flange mount, bowl mount) and the location of the fuel inlet. These details must match your original carburetor.
LCT (Liquid Combustion Technology) Carburetors
LCT engines are often found in newer snow blowers from brands like Ariens, Husqvarna, and Cub Cadet. These engines are known for their fuel efficiency and reliability. Like other engine brands, the engine model number is essential for identifying the correct replacement carburetor.
Other Engine Brands
Other engine brands you might encounter include:
- Honda: Known for their reliability and found in high-end snow blowers.
- Kohler: Another reputable engine manufacturer often found in snow blowers.
- Loncin: An increasingly common engine brand in newer, budget-friendly snow blowers.
Regardless of the engine brand, always use the engine model number to find the correct carburetor. If you are having difficulties, the experts at Madison Tractor can help!
Carburetor Replacement Steps (General Guide)
Disclaimer: These are general steps. Always consult your snow blower's owner's manual for specific instructions and safety precautions.
- Safety First: Disconnect the spark plug wire to prevent accidental starting.
- Drain the Fuel: Drain the fuel tank completely to prevent spills.
- Remove the Air Filter Assembly: Remove the air filter cover and filter element.
- Disconnect Fuel Lines and Linkages: Carefully disconnect the fuel lines from the carburetor. Note their original positions for reinstallation. Also, detach any throttle or choke linkages connected to the carburetor.
- Remove the Carburetor: Unscrew the bolts or nuts that secure the carburetor to the engine. Gently remove the carburetor.
- Install the new carburetor: Install the new carburetor in the reverse order of removal. Ensure all fuel lines and linkages are securely connected.
- Reconnect the Spark Plug Wire: Reconnect the spark plug wire.
- Test the Engine: Start the engine and check for proper operation. Adjust the idle speed if necessary.
Safety Warning: Gasoline is highly flammable. Work in a well-ventilated area away from open flames or sparks. Wear appropriate safety glasses and gloves.
When reassembling, consider replacing other common wear items such as snow blower shear pins or snow blower belts if they are showing their age!
Troubleshooting After Carburetor Replacement
Even after replacing the carburetor, you might encounter some issues. Here are a few troubleshooting tips:
- Engine Still Won't Start: Check the spark plug for spark. Ensure the fuel lines are not clogged and that fuel is reaching the carburetor.
- Rough Idling: Adjust the idle speed screw on the carburetor. Refer to your owner's manual for the correct idle speed.
- Engine Stalls Under Load: The carburetor might need further adjustment. Consult a qualified mechanic if you are not comfortable making adjustments.
- Fuel Leaks: Check all fuel line connections for leaks. Replace any damaged fuel lines.
Snow Blower Brands We Support
Madison Tractor is your one-stop shop for snow blower parts for a wide range of brands, including:
- John Deere
- Craftsman
- Cub Cadet
- Husqvarna
- Toro
- Ariens
- Murray
- Hustler
- Scag
- Exmark
- Ferris
- Snapper
- Simplicity
- Dixie Chopper
We carry a wide variety of parts, including belts, blades, spindles, pulleys, filters, spark plugs, bearings, and more. Don't forget to inspect your snow blower paddles and snow blower skid shoes for wear!
Shop Snow Blower Parts at Madison Tractor
At Madison Tractor Company, we're committed to providing you with the highest quality snow blower parts at competitive prices. Our knowledgeable staff is here to help you find the right parts for your machine. Browse our extensive online catalog or contact us today for assistance. Keep your snow blower running smoothly all winter long with Madison Tractor! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Snow Blower Parts Guide: Find Replacement Parts by Brand & Model

















