Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Snow Blower Control Cable: Drive & Speed Cables

Snow blower control cables are essential for proper operation. This guide explains different cable types, common issues, troubleshooting steps, and replacement procedures to keep your machine running smoothly.

Understanding Snow Blower Control Cables

Your snow blower relies on a network of cables to translate your commands into action. These snow blower control cables connect levers and handles on the control panel to various components, allowing you to control drive speed, auger engagement, and chute direction. Maintaining these cables is crucial for optimal performance and safety.

Recommended Parts for This Guide

9 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

At Madison Tractor Company, we understand the importance of having the right parts to keep your snow blower in top condition. We stock a wide selection of control cables for popular brands like John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, and more.

Types of Control Cables

  • Drive Control Cable: This cable controls the forward and reverse motion of your snow blower. It connects the drive lever to the transmission, allowing you to select different speeds.
  • Speed Control Cable: Often integrated with the drive control on newer models, this cable directly manages the speed settings.
  • Auger Control Cable: When you engage the auger lever, this cable activates the mechanism that rotates the auger and throws snow.
  • Chute Control Cable: Some models use cables to control the rotation and/or deflection of the discharge chute.

While each cable has a specific function, they all share the same basic design: a flexible wire rope encased in a protective housing. This design allows the cable to transmit force and motion around corners and through tight spaces, including essential components like throttle control cables, choke control cables, and engine control cables.

Common Problems with Snow Blower Control Cables

Like any mechanical component, control cables can wear out or become damaged over time. Here are some common problems:

  • Stretching: Over time, the cable can stretch, leading to sluggish response or failure to fully engage the intended function.
  • Fraying: Constant use and exposure to the elements can cause the cable to fray, weakening its integrity.
  • Rust and Corrosion: Moisture and salt can cause the cable and its housing to rust, making it difficult to move freely.
  • Breaks: In severe cases, the cable can break completely, rendering the associated function inoperable.
  • Binding: Debris or corrosion within the cable housing can cause the cable to bind, making it difficult to move smoothly.

Diagnosing Control Cable Issues

If your snow blower is not performing as expected, it's important to diagnose the problem before attempting any repairs. Here are some things to look for:

  • Sluggish Response: If the snow blower takes longer than usual to respond to your commands, the cable may be stretched or binding.
  • Difficulty Engaging: If you have trouble engaging the drive or auger, the cable may be stretched or broken.
  • Excessive Play: If the control lever feels loose or has excessive play, the cable may be stretched or disconnected.
  • Visible Damage: Inspect the cable for any signs of fraying, rust, or breaks.

You can also perform a simple test to check the cable's tension. Disconnect the cable from the component it controls (e.g., the transmission or auger engagement lever) and try to pull on the cable. If there is excessive slack, the cable is likely stretched and needs to be adjusted or replaced.

Adjusting Control Cables

In some cases, you may be able to adjust the control cable to compensate for stretching. Most snow blowers have adjustment points along the cable housing. Consult your owner's manual for specific instructions on how to adjust the cables on your model.

  1. Locate the Adjustment Point: This is typically a threaded fitting with a lock nut.
  2. Loosen the Lock Nut: Use a wrench to loosen the lock nut.
  3. Adjust the Cable Tension: Turn the threaded fitting to increase or decrease the cable tension.
  4. Tighten the Lock Nut: Once you have achieved the desired tension, tighten the lock nut to secure the fitting.
  5. Test the Function: Test the snow blower to ensure that the cable is properly adjusted.

Important Note: Be careful not to overtighten the cable, as this can damage the cable or the component it controls.

Replacing a Snow Blower Control Cable

If adjusting the cable doesn't solve the problem, or if the cable is severely damaged, you will need to replace it. Here's a general guide. Always consult your snow blower's repair manual before performing any maintenance. You'll likely need basic tools like screwdrivers, pliers, and wrenches. For specific brands, remember we carry Ariens snowblower parts, Craftsman snowblower parts, Toro snowblower parts, and Murray snowblower parts.

Safety First: Before starting any repairs, disconnect the spark plug wire to prevent accidental starting. Wear safety glasses and gloves.

  1. Remove the Old Cable:
    • Carefully disconnect the cable from both ends. Take note of how the cable is routed, as you will need to route the new cable in the same way.
    • In some cases, you may need to remove panels or covers to access the cable.
  2. Install the New Cable:
    • Route the new cable in the same way as the old cable.
    • Connect the cable to both ends, making sure it is properly secured.
    • Adjust the cable tension as needed.
  3. Test the Function:
    • Reconnect the spark plug wire.
    • Start the snow blower and test the function controlled by the new cable to ensure that it is working properly.

When replacing a control cable, it's always a good idea to inspect other related components, such as snow blower belts and snow blower shear pins, for wear and tear. Replacing these components at the same time can save you time and hassle in the long run.

Choosing the Right Replacement Cable

It's crucial to select the correct replacement cable for your specific snow blower model. Using the wrong cable can lead to improper operation or even damage to your machine. Here's how to ensure you get the right part:

  • Consult Your Owner's Manual: Your owner's manual should list the correct part number for the control cable.
  • Check the Model Number: Locate the model number of your snow blower and use it to search for compatible parts online or at a parts retailer like Madison Tractor Company.
  • Compare the Old and New Cables: Visually compare the old and new cables to ensure that they are the same length and have the same end fittings.

We stock control cables for a wide range of snow blower brands and models, including John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, and Dixie Chopper. If you're unsure which cable you need, our knowledgeable staff can help you find the right part.

Preventative Maintenance for Control Cables

Taking care of your snow blower's control cables can extend their lifespan and prevent unexpected breakdowns. Here are some simple maintenance tips:

  • Lubricate Regularly: Use a silicone-based lubricant to keep the cables moving smoothly. Apply the lubricant to the cable ends and along the cable housing.
  • Inspect Regularly: Inspect the cables for any signs of wear or damage. Replace any cables that are frayed, rusted, or broken.
  • Store Properly: Store your snow blower in a dry place to prevent rust and corrosion.

By following these simple tips, you can keep your snow blower's control cables in good condition and ensure reliable performance for years to come. Also, remember to check other components, such as snow blower skid shoes for wear, and keep extra snow blower paddles on hand if you have a single-stage unit.

Shop snow blower parts at Madison Tractor

At Madison Tractor Company, we're committed to providing our customers with high-quality snow blower parts at competitive prices. We offer a wide selection of control cables, belts, shear pins, and other replacement parts for all major brands. Shop our online store today and keep your snow blower running smoothly all winter long. We also have parts for Ariens and other popular brands. Our expert staff is always ready to help you find the parts you need. Contact us today! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.