Snow Blower Auger Housing: Rust Repair & Replacement
The snow blower auger housing takes a beating! Learn how to deal with rust, when repair is possible, when replacement is necessary, and how to prevent future damage. Keep your snow blower ready for winter.
Introduction to the Snow Blower Auger Housing
The auger housing on your snow blower is a critical component, responsible for containing and directing the snow as it's chewed up and propelled away. It's the metal shell that surrounds the spinning auger. Given its exposure to snow, ice, salt, and other corrosive elements, the auger housing is particularly susceptible to rust and damage. This guide will walk you through how to assess, repair, and, if necessary, replace your snow blower auger housing, helping you keep your machine running smoothly for years to come.
Recommended Parts for This Guide
2 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
We'll cover rust repair strategies, replacement options, and offer preventative maintenance tips to extend the life of your snow blower, whether it's a John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, or Dixie Chopper.
Assessing the Damage
Before you begin any repairs, it's essential to thoroughly inspect the auger housing. Look for:
- Surface Rust: Small areas of orange discoloration.
- Pitting: Small, crater-like depressions in the metal.
- Perforation: Holes or weakened areas where rust has eaten through the metal.
- Dents and Bends: Damage from impacts that can affect the auger's operation and housing integrity.
Pay close attention to the lower section of the housing, as this area is most exposed to moisture and road salt. Also, inspect the area around the shear pins, as rust can weaken the metal and make shear pin replacement difficult.
Rust Repair Techniques
If the rust is limited to surface rust or minor pitting, you can often repair the auger housing and extend its life. Here's a step-by-step guide:
- Safety First: Disconnect the spark plug wire to prevent accidental starting. Wear safety glasses and gloves.
- Cleaning: Thoroughly clean the affected area with a wire brush or sandpaper to remove loose rust and debris. For heavy rust, consider using a rust remover product.
- Sanding: Sand the area smooth to create a clean surface for paint adhesion.
- Priming: Apply a rust-inhibiting primer to protect the bare metal.
- Painting: Apply several coats of a durable, weather-resistant paint designed for outdoor use. Match the paint to your snow blower's color for a professional finish. Many brands like Ariens and Toro offer touch-up paint.
- Waxing (Optional): After the paint has fully cured, apply a coat of automotive wax to help protect the paint from the elements.
Important Note: For heavily rusted areas, welding a patch panel may be an option, but this requires welding skills and equipment. If you're not comfortable welding, consult a professional repair shop.
When to Replace the Auger Housing
If the auger housing has significant perforation, extensive pitting, or structural damage, replacement is usually the best option. Continuing to use a severely damaged housing can lead to further component damage and unsafe operating conditions.
Signs you need a new auger housing:
- Large rust holes that compromise the housing's integrity.
- Extensive cracking or bending.
- Significant wear or damage to the auger bearings or mounting points within the housing.
Replacing the Auger Housing
Replacing the auger housing is a more involved process, but it's manageable with the right tools and instructions. Here's a general overview:
- Safety First: Disconnect the spark plug wire. Drain the fuel tank or use a fuel shut-off valve if available.
- Disassembly: Remove the existing auger housing. This typically involves removing bolts, nuts, and potentially disconnecting cables or linkages. Consult your snow blower's service manual for specific instructions. You may also need to disconnect the snow blower belt.
- Transfer Components: Transfer any necessary components from the old housing to the new one. This may include bearings, shafts, and hardware. Pay close attention to the orientation of these components.
- Installation: Install the new auger housing, following the reverse of the disassembly steps. Ensure all bolts and nuts are properly tightened.
- Adjustments: Make any necessary adjustments to cables, linkages, or auger alignment.
- Testing: Reconnect the spark plug wire and start the snow blower. Verify that the auger spins freely and that there are no unusual noises or vibrations.
Finding the Right Auger Housing: When searching for a replacement auger housing, it's crucial to find one that's compatible with your snow blower's make and model. Use the model number to find the correct OEM or aftermarket replacement. We carry auger housings compatible with many brands, including Craftsman, Cub Cadet, and Husqvarna. You may need to reference your Ariens snowblower parts list, or Toro snowblower parts diagrams to ensure proper fitment. Consider checking Murray snowblower parts listings as well if that is your brand.
Preventative Maintenance Tips
The best way to avoid costly repairs and replacements is to proactively maintain your snow blower. Here are some tips to extend the life of your auger housing:
- Regular Cleaning: After each use, clean the auger housing with water to remove snow, ice, and salt.
- Touch-Up Paint: Regularly inspect the auger housing for scratches or chips and touch them up with paint to prevent rust from forming.
- Lubrication: Lubricate the auger shaft and bearings regularly with a waterproof grease.
- Storage: Store your snow blower in a dry, covered location during the off-season.
- Salt Avoidance: Try to avoid throwing heavily salted snow whenever possible.
- Skid Shoe Adjustment: Properly adjust your snow blower skid shoes to prevent the auger housing from scraping against the ground.
Don't forget other maintenance tasks, such as changing the oil, replacing the spark plug, and inspecting the snow blower auger housing and drive belts. These simple steps can significantly extend the life of your machine.
Conclusion
The snow blower auger housing is a vital component that protects the auger and directs snow efficiently. By understanding how to assess damage, perform rust repairs, and, when necessary, replace the housing, you can keep your snow blower operating at its best for years to come. Regular maintenance and preventative measures will further extend its lifespan, saving you time and money in the long run.
Shop snow blower parts at Madison Tractor
Madison Tractor Company is your trusted source for high-quality snow blower parts and accessories. We carry a wide selection of OEM and aftermarket parts for major brands, including John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, and Ariens. Whether you need a new auger housing, shear pins, belts, or any other replacement part, we have you covered. Shop our extensive inventory online today and get your snow blower ready for winter! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Snow Blower Parts Guide: Find Replacement Parts by Brand & Model









