Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Ariens Snow Blower Carburetor: OEM Replacement

A faulty carburetor can bring your Ariens snowblower to a halt. This guide will help you diagnose carburetor issues, understand your replacement options, and keep your machine running smoothly all winter.

Introduction to Ariens snowblower carburetor Issues

When the snow starts falling, a reliable snowblower is essential. For many homeowners, that means an Ariens snowblower, known for its power and durability. However, like any small engine, the carburetor can be a source of problems. The ariens snowblower carburetor is responsible for mixing air and fuel in the correct ratio for combustion. Over time, fuel can degrade, leaving behind varnish and deposits that clog the tiny passages within the carburetor.

Recommended Parts for This Guide

1 part we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

Common symptoms of a faulty Ariens snowblower carburetor include:

  • Difficulty starting, especially after sitting idle for a period.
  • Rough idling or stalling.
  • Poor performance under load.
  • Black smoke from the exhaust, indicating a rich fuel mixture.
  • Fuel leaking from the carburetor.

If you're experiencing any of these issues, it might be time to inspect or replace your Ariens snowblower carburetor. At Madison Tractor Company, we offer a wide selection of OEM and aftermarket carburetors for Ariens and other popular brands like John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, and Dixie Chopper.

Before diving in, remember to always disconnect the spark plug wire to prevent accidental starting and ensure the engine is cool before working on it. Safety first!

Diagnosing Carburetor Problems

Before assuming the carburetor is the culprit, perform some basic troubleshooting steps:

  1. Check the Fuel: Old or contaminated fuel is a frequent cause of carburetor problems. Drain the fuel tank and replace it with fresh, high-quality fuel. Consider adding a fuel stabilizer, especially if you're storing the snowblower for an extended period. Also, inspect and consider replacing your in-line fuel filter.
  2. Inspect the Fuel Lines: Make sure the fuel lines are not cracked, kinked, or clogged. Replace any damaged fuel lines.
  3. Examine the Air Filter: A dirty air filter can restrict airflow, causing the engine to run rich and leading to carburetor issues. Clean or replace the air filter as needed. You can find replacement filters at Madison Tractor.
  4. Check the Spark Plug: A fouled spark plug can cause starting problems. Clean or replace the spark plug and ensure it's properly gapped.

If these steps don't resolve the issue, the carburetor is likely the problem.

Cleaning the Ariens Snowblower Carburetor

Sometimes, cleaning the carburetor can restore its functionality. Here's a basic overview of the cleaning process:

  1. Remove the Carburetor: Carefully disconnect the fuel lines, throttle linkage, and choke linkage from the carburetor. Take pictures as you disassemble it to help with reassembly.
  2. Disassemble the Carburetor: Remove the float bowl, float, needle valve, and any other removable components. Be extremely careful with the tiny jets and gaskets.
  3. Clean the Components: Use carburetor cleaner to thoroughly clean all parts. Pay special attention to the jets and passages. You can use a fine wire or carburetor cleaning tool to clear any blockages.
  4. Reassemble the Carburetor: Carefully reassemble the carburetor, ensuring all parts are properly seated. Replace any worn or damaged gaskets.
  5. Reinstall the Carburetor: Reconnect the fuel lines, throttle linkage, and choke linkage.

Important Note: Carburetor cleaning can be complex and requires some mechanical skill. If you're not comfortable with this process, it's best to consult a qualified mechanic or replace the carburetor altogether.

Ariens Snowblower Carburetor Replacement: A Step-by-Step Guide

Replacing the carburetor is often the most reliable solution for persistent carburetor problems. Here's a step-by-step guide:

  1. Identify the Correct Carburetor: Use your Ariens snowblower's model number to find the correct replacement carburetor. You can find your model number on a sticker or plate on the snowblower's frame. Madison Tractor Company offers a parts lookup tool on our website to help you find the right ariens snowblower carburetor for your specific model. Be sure to check out our guide on Ariens Snow Blower Parts: OEM Part Numbers by Model for more information.
  2. Gather Your Tools: You'll need a socket set, screwdrivers, pliers, and a clean workspace.
  3. Disconnect Fuel Lines and Linkages: As with cleaning, carefully disconnect the fuel lines, throttle linkage, and choke linkage from the old carburetor. Again, take pictures!
  4. Remove the Old Carburetor: Unbolt the old carburetor from the engine.
  5. Install the new carburetor: Mount the new carburetor in place, ensuring it's properly aligned.
  6. Reconnect Fuel Lines and Linkages: Reconnect the fuel lines, throttle linkage, and choke linkage to the new carburetor. Double-check your connections based on the photos you took during disassembly.
  7. Prime the Carburetor: Most carburetors have a primer bulb. Press the primer bulb several times to prime the carburetor with fuel.
  8. Start the Engine: Start the snowblower and let it run for a few minutes to ensure the new carburetor is functioning correctly. Adjust the idle speed if necessary.

OEM vs. Aftermarket Carburetors

When replacing your Ariens snowblower carburetor, you'll have the option of choosing between an OEM (Original Equipment Manufacturer) carburetor and an aftermarket carburetor.

  • OEM Carburetors: OEM carburetors are made by the same manufacturer that supplied the original carburetor for your snowblower. They are designed to provide the best possible fit and performance.
  • Aftermarket Carburetors: Aftermarket carburetors are made by third-party manufacturers. They are often less expensive than OEM carburetors, but the quality and performance can vary.

At Madison Tractor Company, we recommend using OEM carburetors whenever possible to ensure optimal performance and reliability. While we carry both, opting for the original manufacturer ensures you're getting a part specifically engineered for your machine.

Preventive Maintenance for Your Carburetor

Here are some tips to help prevent carburetor problems and extend the life of your Ariens snowblower:

  • Use Fresh Fuel: Always use fresh, high-quality fuel. Avoid using fuel that has been stored for more than a few months.
  • Add Fuel Stabilizer: Add a fuel stabilizer to the fuel tank before storing the snowblower for an extended period.
  • Drain the Fuel Tank: If you're not going to use the snowblower for several months, drain the fuel tank and run the engine until it stalls to remove any remaining fuel from the carburetor.
  • Regularly Inspect the Air Filter: Clean or replace the air filter regularly to ensure proper airflow.

Regular maintenance will not only prevent carburetor issues but will also extend the life of other components like snow blower belts, snow blower shear pins, and other vital parts.

Other Essential snow blower parts

While you're addressing carburetor issues, consider inspecting other critical components of your Ariens snowblower. Be sure to check the condition of your belts, shear pins, skid shoes and paddles (if applicable). Replacing worn parts now can prevent more significant problems down the road. We also carry replacement blades for various snow blower models.

Shop ariens snowblower parts at Madison Tractor Company

Madison Tractor Company is your trusted source for OEM and aftermarket Ariens snowblower parts. We offer a wide selection of carburetors, belts, shear pins, and other essential parts to keep your snowblower running smoothly all winter long. Use our convenient parts lookup tool to find the right parts for your specific model. Our knowledgeable staff is always available to answer your questions and help you find the parts you need. Shop with confidence at Madison Tractor Company and get your Ariens snowblower ready for winter!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →