Craftsman Snow Blower Parts: Belts, Shear Pins & More
Craftsman snow blowers are a reliable tool for winter weather, but like any machine, they require maintenance and occasional repairs. This guide covers common Craftsman snowblower parts, helping you identify and replace what you need to keep your snow blower running smoothly.
Craftsman Snowblower Parts: A Comprehensive Guide
When winter hits, you need your Craftsman snow blower to be ready. At Madison Tractor, we understand the importance of having the right parts on hand to keep your machine running efficiently. This guide will walk you through the most common Craftsman snowblower parts you might need, from belts and shear pins to scraper bars and more. We carry a wide selection of parts compatible with various brands like John Deere, Cub Cadet, Husqvarna, Toro, Ariens, and Murray, ensuring you'll find what you need regardless of your machine.
Recommended Parts for This Guide
8 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
Understanding Your Craftsman Snow Blower
Before you start ordering parts, it's crucial to understand the different components of your Craftsman snow blower. Most Craftsman snow blowers fall into one of two categories: single-stage or two-stage.
- Single-Stage Snow Blowers: These machines use a rotating auger to scoop up snow and throw it out the discharge chute. They're typically lighter and easier to maneuver, ideal for smaller driveways and lighter snowfall.
- Two-Stage Snow Blowers: These blowers have an auger that breaks up the snow, followed by an impeller that throws the snow out the chute. Two-stage models are more powerful and better suited for larger areas and heavier, wetter snow.
Knowing which type of snow blower you have will help you identify the correct replacement parts.
Essential Craftsman Snowblower Parts
Belts
Belts are crucial for transferring power from the engine to the auger and wheels. Over time, they can wear down, crack, or break, leading to reduced performance or complete failure. There are typically two main belts on a two-stage snow blower: the auger belt and the drive belt. A snow blower belt transmits power from the engine to either the auger or the drive system. Replacing a belt is a relatively straightforward process. Here's a general guide:
- Safety First: Disconnect the spark plug wire to prevent accidental starting.
- Remove the Belt Cover: Locate and remove the belt cover, usually held in place by screws or bolts.
- Release Belt Tension: Disengage the old belt by releasing the tension on the idler pulley. This often involves a lever or spring-loaded mechanism.
- Install the New Belt: Route the new belt around the pulleys, ensuring it's seated properly.
- Re-engage Tension: Re-engage the idler pulley to tension the new belt.
- Replace the Cover: Reinstall the belt cover.
- Reconnect Spark Plug: Reconnect the spark plug wire.
Consult your owner's manual for specific instructions related to your model. When ordering belts, it's essential to have the correct part number or dimensions. If you're unsure, provide your model number to our team at Madison Tractor, and we'll help you find the right fit.
Shear Pins
Shear pins are designed to protect the auger and gearbox from damage if the auger encounters a hard object, like a rock or ice chunk. When the auger experiences excessive force, the shear pins are designed to break, preventing more serious damage. Replacing snow blower shear pins is a quick and easy task:
- Safety First: Disconnect the spark plug wire.
- Locate the Broken Pins: Examine the auger to identify the broken shear pins. They are typically located near the auger shaft.
- Remove the Broken Pieces: Use a punch or screwdriver to remove any remaining pieces of the broken pins.
- Install New Pins: Insert the new shear pins and secure them with cotter pins or other fasteners.
- Reconnect Spark Plug: Reconnect the spark plug wire.
Always use the correct type and size of shear pins for your Craftsman snow blower. Using the wrong shear pins could result in damage to the auger or gearbox. See our guide on snow blower shear pin sizes for more detail.
Scraper Bar
The scraper bar is located at the bottom of the snow blower housing and helps to clear snow down to the pavement. Over time, it can wear down from contact with the ground. A worn scraper bar can leave behind a layer of snow or ice. Replacing the scraper bar is a simple process:
- Safety First: Disconnect the spark plug wire.
- Locate the Scraper Bar: The scraper bar is attached to the bottom of the snow blower housing.
- Remove the Old Scraper Bar: Remove the bolts or screws holding the scraper bar in place.
- Install the New Scraper Bar: Align the new scraper bar and secure it with the bolts or screws.
- Reconnect Spark Plug: Reconnect the spark plug wire.
Ensure the scraper bar is properly aligned to maximize its effectiveness. Madison Tractor carries a variety of scraper bars suitable for Craftsman snow blowers. Some are even universal!
Skid Shoes
Skid shoes are adjustable plates located on either side of the snow blower housing. They allow you to adjust the height of the snow blower, preventing the scraper bar from dragging on the ground. This is especially useful on gravel or uneven surfaces. Replacing snow blower skid shoes is a quick and easy way to protect your snow blower and surfaces. Here's how:
- Safety First: Disconnect the spark plug wire.
- Locate the Skid Shoes: The skid shoes are located on either side of the snow blower housing.
- Remove the Old Skid Shoes: Remove the bolts or screws holding the skid shoes in place.
- Install the New Skid Shoes: Align the new skid shoes and secure them with the bolts or screws.
- Adjust the Height: Adjust the height of the skid shoes to suit the surface you're clearing.
- Reconnect Spark Plug: Reconnect the spark plug wire.
Adjust the skid shoes based on the surface you're clearing. For gravel driveways, set them higher to prevent the snow blower from picking up rocks. For paved surfaces, you can lower them to clear the snow more effectively.
Other Important Parts
- Spark Plugs: A faulty spark plug can cause starting problems or poor performance. Replace it annually for optimal performance.
- Air Filters: A clean air filter ensures proper airflow to the engine. Clean or replace it regularly.
- Oil Filters: If your snow blower has an oil filter, replace it according to the manufacturer's recommendations.
- Auger Blades: Replace worn or damaged auger blades to maintain optimal snow-clearing performance.
- snow blower paddles: If you have a single-stage snow blower, the rubber paddles wear over time and require replacement.
Finding the Right Craftsman Snowblower Parts
When searching for Craftsman snowblower parts, it's essential to have your model number handy. This will ensure you order the correct parts for your specific machine. You can usually find the model number on a sticker or plate located on the snow blower housing. Madison Tractor carries a wide variety of parts compatible with Craftsman, Murray, Ariens, Toro, and more. Whether you need a new belt, shear pins, or a scraper bar, we've got you covered. And if you need parts for other brands, check out our guides to Ariens snowblower parts, Toro snowblower parts, and Murray snowblower parts.
Safety Precautions
Always disconnect the spark plug wire before performing any maintenance or repairs on your snow blower. This will prevent accidental starting and reduce the risk of injury. Wear appropriate safety gear, such as gloves and eye protection, when working on your machine. Consult your owner's manual for specific safety instructions and maintenance procedures.
Shop Craftsman Snowblower Parts at Madison Tractor
At Madison Tractor Company, we're committed to providing high-quality Craftsman snowblower parts and exceptional customer service. Whether you need a new belt, shear pins, or any other replacement part, we have you covered. Browse our extensive selection of snow blower parts today and keep your Craftsman snow blower running smoothly all winter long! Our team is here to help you find the correct part for your snowblower. Contact us with your model number if you have any questions. You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Snow Blower Parts Guide: Find Replacement Parts by Brand & Model














