Husqvarna Snow Blower Parts: Belts, Shear Pins & Skids
Maintaining your Husqvarna snow blower is crucial for reliable winter performance. This guide covers essential replacement parts like belts, shear pins, and skid shoes, ensuring your machine is ready for any snowfall.
Winter weather demands reliable equipment, and your Husqvarna snow blower is no exception. To keep your machine running smoothly all season long, regular maintenance and timely replacement of worn parts are essential. This guide focuses on three crucial Husqvarna snowblower parts: belts, shear pins, and Skid shoes. We'll cover what they do, how to inspect them, and how to replace them, helping you keep your Husqvarna snow thrower in top condition. At Madison Tractor, we carry a wide selection of parts for various brands, including John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity and Dixie Chopper.
Recommended Parts for This Guide
3 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
Understanding Husqvarna Snowblower Belts
The belts in your Husqvarna snow blower are responsible for transferring power from the engine to both the auger (the rotating blades that break up the snow) and the drive system (which moves the machine forward). Over time, these belts can wear out due to friction, exposure to the elements, and general use. A worn or broken V-belt will result in reduced throwing distance, difficulty moving the snow blower, or complete failure.
Types of Husqvarna Snowblower Belts
Husqvarna snow blowers typically use two main types of belts:
- Auger Belt: This belt connects the engine to the auger, powering the snow-clearing action.
- Drive Belt: This belt connects the engine to the wheels or tracks, enabling the snow blower to move.
For more information on snow blower belts in general, check out our guide to snow blower belts. It's important to use the correct belt for your specific Husqvarna model. Using the wrong size or type can lead to performance issues or even damage to the machine.
Inspecting Your Husqvarna Snowblower Belts
Regular inspection is key to identifying potential belt problems early. Here's what to look for:
- Cracks: Check the belt surface for any cracks, especially along the inner edges.
- Wear: Look for signs of wear, such as fraying, glazing (a shiny, hardened surface), or thinning.
- Slack: The belt should be taut but not overly tight. Excessive slack indicates stretching or wear.
- Damage: Check for any obvious damage, such as chunks missing or separation of the belt layers.
Safety First: Before inspecting or replacing any belts, always disconnect the spark plug wire to prevent accidental starting.
Replacing a Husqvarna Snowblower Belt
Replacing a belt typically involves the following steps. Always consult your Husqvarna owner's manual for specific instructions for your model:
- Disconnect the spark plug wire.
- Remove the belt cover. This is usually held in place by screws or bolts.
- Release the belt tension. This may involve loosening a tensioner pulley or using a special tool.
- Remove the old belt. Carefully slip the belt off the pulleys.
- Install the new belt. Ensure the belt is properly seated in the grooves of the pulleys.
- Adjust the belt tension. Follow your owner's manual instructions for setting the correct tension.
- Reinstall the belt cover.
- Reconnect the spark plug wire.
Husqvarna Snowblower Shear Pins: The Safety Net
Shear pins are designed to protect your Husqvarna snow blower's auger and gearbox from damage. They are intentionally weak bolts that connect the auger to the auger shaft. If the auger encounters a hard object, like a rock or ice chunk, the shear pins will break, preventing the auger from seizing up and potentially damaging the gearbox. Think of them as a fuse for your snowblower.
Why are Shear Pins Important?
Without shear pins, hitting a solid object could cause significant and costly damage to the auger, gearbox, or even the engine. Shear pins are a cheap and easy-to-replace safety mechanism. Learn more about snow blower shear pins in our detailed guide.
Identifying the Right Shear Pins
It is absolutely critical to use the correct shear pins for your specific Husqvarna snow blower model. Using the wrong size or strength of shear pin can defeat their purpose, either by not breaking when they should or by breaking prematurely. Your Husqvarna owner's manual will specify the correct shear pin size and material for your machine.
Replacing Husqvarna Snowblower Shear Pins
Replacing shear pins is a straightforward process:
- Shut off the engine and remove the key. Wait for all moving parts to stop completely.
- Locate the broken shear pin(s). These are usually located on the auger shaft, near where the auger connects to the gearbox.
- Remove the broken pin(s). You may need to use a punch or pliers to remove the remnants of the broken pin.
- Install the new shear pin(s). Insert the new pin through the auger and auger shaft, and secure it with the appropriate nut or fastener.
- Ensure the shear pin is properly tightened.
Protecting Surfaces with Husqvarna Snowblower Skid Shoes
Skid shoes (also called skid plates) are adjustable metal or plastic pieces located on the sides of the snow blower housing. They raise or lower the scraper blade, which is the metal piece at the bottom of the snow blower that scrapes the snow off the ground. Skid shoes protect the scraper blade and prevent damage to your driveway, sidewalk, or other surfaces. By adjusting the height of the skid shoes, you can control how close the scraper blade comes to the ground.
Why Use Skid Shoes?
- Protect surfaces: Prevent scratches and damage to paved or delicate surfaces.
- Adjust for terrain: Raise the scraper blade for gravel driveways or uneven surfaces to avoid picking up loose material.
- Extend scraper blade life: Reduce wear and tear on the scraper blade.
Learn more about snow blower skid shoes and their purpose in our complete guide.
Inspecting and Replacing Skid Shoes
Skid shoes wear down over time due to contact with the ground. Regularly inspect them for wear and tear. If they are worn thin or damaged, replace them to maintain proper snow blower performance and surface protection.
- Inspect for wear: Examine the skid shoes for excessive wear, thinning, or damage.
- Loosen the mounting bolts: Use a wrench to loosen the bolts that secure the skid shoes to the snow blower housing.
- Remove the old skid shoes: Slide the old skid shoes off the mounting bolts.
- Install the new skid shoes: Slide the new skid shoes onto the mounting bolts.
- Adjust the height: Set the skid shoes to the desired height, depending on the surface you'll be clearing.
- Tighten the mounting bolts: Securely tighten the bolts to hold the skid shoes in place.
Often, skid shoes are universal and will fit a variety of models. But it's still best to ensure you select the correct part for the machine.
Beyond Belts, Shear Pins, and Skids
While belts, shear pins, and skid shoes are crucial, don't forget about other essential Husqvarna snowblower parts, such as blades, spindles, pulleys, filters, and spark plugs. Regular maintenance, including changing the oil and replacing the spark plug, will help keep your snow blower running reliably for years to come. Madison Tractor offers a wide range of replacement parts for all your snow blower maintenance needs. Consider stocking up on common parts like shear pins and spark plugs before the winter season begins, ensuring you're prepared for any unexpected repairs. Our guide on Ariens snowblower parts, Craftsman snowblower parts, Murray snowblower parts and Toro snowblower parts may also be helpful even if you don't own those particular brands because many of the systems are similar.
By understanding the function of these critical Husqvarna snowblower parts and performing regular maintenance, you can ensure your machine is ready to tackle any winter weather. Remember to always consult your owner's manual for specific instructions and safety precautions related to your model.
Disclaimer: This guide is for informational purposes only. Always consult your Husqvarna owner's manual for specific instructions and safety precautions related to your model. If you are not comfortable performing these tasks, consult a qualified mechanic.
Shop Husqvarna snowblower parts at Madison Tractor today! Visit our Husqvarna snowblower parts section to find the belts, shear pins, skid shoes, and other components you need to keep your machine running smoothly all winter long.
🔍 Can't Find Your Part?
Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.
Try the Part Finder →Part of our comprehensive guide
Snow Blower Parts Guide: Find Replacement Parts by Brand & Model










