Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Craftsman Snow Blower Belt: Auger Belt Part Numbers

A broken or worn auger belt on your Craftsman snow blower can stop you in your tracks. This guide helps you identify the correct replacement belt and get your machine back to clearing snow quickly.

Introduction to Craftsman Snow Blower Belts

A functioning snow blower is essential for clearing driveways and walkways during the winter months. Among the most crucial components of a snow blower are its belts, particularly the auger belt. The auger belt transmits power from the engine to the auger, which is responsible for gathering and feeding snow into the impeller (also known as the accelerator or second-stage fan). A worn or broken craftsman snow blower belt can render your snow blower useless, making timely replacement critical. At Madison Tractor, we understand the importance of getting the right part quickly. We carry a wide range of snow blower parts, including belts, for brands like John Deere, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity Dixie Chopper. If you're having trouble with your snowblower, it may be the right time to consider snow blower maintenance. Check out our main guide to Snow Blower Replacement Parts.

Recommended Parts for This Guide

6 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

Why Auger Belts Fail

Several factors contribute to the wear and tear of snow blower auger belts

  • Normal Wear and Tear Belts degrade over time due to friction, heat repeated flexing.
  • Overloading the Auger Pushing the snow blower too hard into deep or heavy snow can strain the auger belt.
  • Improper Belt Tension Incorrect tension (too loose or too tight) accelerates wear.
  • Obstructions Rocks, ice chunks, or other debris can become lodged in the auger, causing sudden belt failure.
  • Incorrect Belt Installation Using the wrong belt or installing it incorrectly can lead to premature failure.

Regular inspection and maintenance are crucial for prolonging the life of your auger belt. This includes checking for cracks, fraying, or excessive wear. Adjusting belt tension according to your owner's manual is also vital. If you're encountering shear pin issues as well, it's worth reading about Snow Blower Shear Pins and making sure you have the proper ones installed.

Identifying the Correct Craftsman Auger Belt Part Number

Finding the right replacement craftsman snow blower belt requires identifying the correct part number. There are several ways to accomplish this

1. Check Your Owner's Manual

Your owner's manual is the best source for the correct auger belt part number. Look for the parts list or exploded diagrams section, which usually provides a detailed breakdown of all components. The auger belt will be listed along with its corresponding part number.

2. Locate the Model Number on Your Snow Blower

If you don't have the owner's manual, locate the model number on your snow blower. It's typically found on a sticker or plate attached to the frame, often near the engine or the handle. Once you have the model number, you can search online for the parts list or contact Madison Tractor with the model number and we can look up the correct part for you.

3. Measuring Your Old Belt (As a Last Resort)

If you cannot find the part number, you *can* measure the old belt, but this is less accurate. You'll need to measure the belt's length (outer circumference) and width. Note whether it is a V-belt (such as the 1/2" X 36" type, a 1/2" X 58" Aramid Blue V-Belt, a 1/2" X 68" Aramid Blue V-Belt, a 1/2" X 70" Aramid Blue V-Belt, a 1/2" X 91" Aramid Blue V-Belt, or a 5/8" X 65" V-Belt) or a cogged belt. Bring this information to Madison Tractor we may be able to cross-reference it with available belts, but this method is not foolproof getting the exact OEM part number is always preferred.

4. Consult the Madison Tractor Website

Madison Tractor's website is a valuable resource for finding craftsman snowblower parts. You can search by part number, model number, or keyword to locate the correct auger belt. Our website also features detailed product descriptions and specifications to help you confirm compatibility.

Common Craftsman Auger Belt Part Numbers (Examples)

While we can't provide an exhaustive list here due to the vast range of Craftsman models, here are a few examples of common auger belt part numbers and the types of snow blowers they might fit. Always verify the part number with your model number before ordering.

It's important to note that these are just examples. The correct part number for your snow blower will depend on its specific model.

Replacing Your Craftsman Auger Belt: A Step-by-Step Guide

Replacing your craftsman snow blower belt is a straightforward process that most homeowners can handle with basic tools. However, always refer to your owner's manual for specific instructions related to your model. Disconnect the spark plug wire to prevent accidental starting during the replacement process.

  1. Preparation Gather your tools (wrenches, sockets, screwdrivers) and the new auger belt. Make sure the engine is cool.
  2. Access the Belt Remove the belt cover(s) to expose the auger belt and pulleys. This usually involves removing a few bolts or screws.
  3. Relieve Belt Tension Most snow blowers have a tensioner pulley that needs to be released to loosen the belt. Locate the tensioner and release it.
  4. Remove the Old Belt Carefully remove the old belt from the pulleys. Note the belt routing for proper installation of the new belt.
  5. Install the New Belt Route the new belt around the pulleys, following the same path as the old belt.
  6. Adjust Belt Tension Re-engage the tensioner pulley to apply the correct tension to the belt. Refer to your owner's manual for the proper tension setting.
  7. Reassemble Reinstall the belt cover(s) and tighten all fasteners.
  8. Test Reconnect the spark plug wire and start the snow blower. Verify that the auger is engaging and operating correctly.

Safety Note: Always wear work gloves and eye protection when working on your snow blower.

Troubleshooting Auger Belt Problems

If your auger belt is constantly breaking or slipping, there may be underlying issues that need to be addressed

  • Worn Pulleys Check the pulleys for wear or damage. Sharp edges or grooves can damage the belt. Replacing worn pulleys can extend belt life. You can often find replacement pulleys at Madison Tractor.
  • Misaligned Pulleys Misaligned pulleys can cause the belt to rub and wear prematurely. Ensure that all pulleys are properly aligned.
  • Sticking Auger A sticking or binding auger can put excessive strain on the belt. Lubricate the auger shaft and check for any obstructions.
  • Incorrect Belt Size Using the wrong size belt, even if it seems to fit, can cause slippage or premature failure. Always use the correct part number specified for your snow blower model.

Extending the Life of Your Auger Belt

Here are some tips to help extend the life of your craftsman snow blower belt

  • Regular Inspection Inspect the belt regularly for signs of wear, cracks, or fraying.
  • Proper Storage Store your snow blower in a dry place to prevent belt deterioration.
  • Avoid Overloading Avoid pushing the snow blower too hard into deep or heavy snow. Take smaller passes.
  • Maintenance Keep the snow blower well-maintained, including lubricating moving parts and adjusting belt tension as needed.
  • Use OEM Parts While aftermarket belts are available, using OEM (Original Equipment Manufacturer) belts generally provides better performance and longevity.

Regular maintenance and preventative measures will save you time and money in the long run by minimizing breakdowns and extending the life of your snow blower.

Shop Craftsman Snow Blower Belts at Madison Tractor

At Madison Tractor, we offer a wide selection of craftsman snow blower belts and other snow blower parts to keep your machine running smoothly all winter long. We carry belts for various Craftsman models, as well as belts and parts for other brands like Ariens (check out Ariens snowblower parts!), Toro (Toro snow blower parts) Murray (Murray snow blower parts). Our knowledgeable staff can help you find the correct part for your specific snow blower model. Browse our selection of snow blower parts today and get your machine ready for winter!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →