Snow Blower Auger Engagement Cable Replacement
A broken snow blower auger cable can leave you stranded in the snow. This guide provides step-by-step instructions for replacing the cable, getting your machine back in action quickly. Learn about the necessary tools, safety precautions, and model-specific variations to ensure a successful repair.
Introduction to Snow Blower Auger Cable Replacement
When winter hits hard, a malfunctioning snow blower can be a major headache. One common issue is a broken or stretched snow blower auger cable. This cable is crucial for engaging the auger, the part that chews through the snow. If the cable is damaged, the auger won't spin, rendering your snow blower useless. Fortunately, replacing the auger cable is a repair most homeowners can tackle with basic tools and this guide. At Madison Tractor Company, we understand the importance of keeping your equipment running smoothly, which is why we offer a wide selection of replacement parts for brands like John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, and Simplicity.
Recommended Parts for This Guide
9 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
This guide will walk you through the process of replacing your snow blower auger cable, step-by-step. We'll cover the tools you'll need, safety precautions, and tips for a smooth and successful repair. Remember to consult your snow blower's owner's manual for specific instructions and diagrams related to your model. And don't forget, we carry a wide range of Ariens snowblower parts to keep your machine running at its best.
Identifying a Faulty Auger Cable
Before diving into the replacement process, it's important to confirm that the auger cable is indeed the problem. Here are some common symptoms of a faulty auger cable:
- The auger doesn't engage: This is the most obvious sign. When you squeeze the auger control lever, the auger doesn't spin.
- Loose or slack cable: Visually inspect the cable. If it appears loose or has excessive slack, it may be stretched or broken.
- Difficulty engaging the auger: You might have to squeeze the lever extremely hard to get the auger to engage, or it may engage intermittently.
- Visible damage to the cable: Look for fraying, kinks, or breaks in the cable itself.
If you're experiencing these symptoms, it's time to consider replacing the snow blower auger cable.
Tools and Materials Needed
To replace your snow blower auger cable, you'll need the following tools and materials:
- New snow blower auger cable: Make sure you get the correct cable for your specific snow blower model. Check our website or your owner's manual for the correct part number.
- Socket set or wrenches: You'll need these to remove the cable from the control lever and the auger arm.
- Pliers: Useful for gripping and manipulating the cable.
- Screwdrivers (Phillips and flathead): For removing covers and accessing the cable.
- Penetrating oil: To loosen any rusted or stuck bolts.
- Work gloves: To protect your hands.
- Safety glasses: To protect your eyes.
- Shop rags: For cleaning up spills.
Before you begin, ensure you have the correct replacement snow blower auger cable. Consider purchasing other frequently replaced parts like snow blower shear pins at the same time to save on shipping and have them on hand for future maintenance.
Step-by-Step Auger Cable Replacement Guide
Follow these steps to replace your snow blower auger cable:
- Safety First: Disconnect the spark plug wire from the spark plug to prevent accidental starting. Allow the engine to cool completely.
- Access the Cable: Depending on your snow blower model, you may need to remove a cover or panel to access the auger cable. Consult your owner's manual for specific instructions.
- Loosen the Cable at the Control Lever: Locate the point where the cable attaches to the auger control lever on the handle. Use a wrench or socket to loosen the bolt or nut securing the cable. Carefully detach the cable from the lever. Take note of how it is attached; often there are springs and small parts.
- Loosen the Cable at the Auger Arm: Follow the cable down to the auger housing. Locate where the cable attaches to the auger arm or a similar mechanism. Loosen the bolt or nut and detach the cable. Again, take note of the orientation.
- Remove the Old Cable: Once both ends are detached, carefully pull the old cable out of its housing. Note the routing of the cable, including any guides or brackets it passes through. This will help you route the new cable correctly.
- Install the New Cable: Route the new cable through the same guides and brackets as the old cable. Ensure it's properly seated in all the correct locations.
- Attach the Cable to the Auger Arm: Connect the new cable to the auger arm, tightening the bolt or nut securely. Make sure the cable is properly positioned and doesn't have excessive slack.
- Attach the Cable to the Control Lever: Connect the other end of the cable to the auger control lever. Adjust the cable tension according to your owner's manual. The auger should engage smoothly when you squeeze the lever and disengage immediately when you release it.
- Test the Auger: Reconnect the spark plug wire. Start the snow blower and test the auger engagement. Ensure the auger spins freely and stops immediately when you release the control lever. If the auger doesn't engage properly, double-check the cable tension and connections.
- Reassemble: Replace any covers or panels you removed earlier.
Remember to double-check all connections and adjustments before using your snow blower. And if you need to replace a snow blower belt while you are at it, now is a great time!
Troubleshooting Common Issues
Even with careful installation, you might encounter some issues. Here are a few common problems and their solutions:
- Auger Doesn't Engage: Check the cable tension. It might be too loose. Also, ensure the cable is properly connected to both the control lever and the auger arm.
- Auger Engages but Doesn't Stop: The cable tension might be too tight. Loosen the cable slightly and retest.
- Cable Keeps Breaking: This could indicate a problem with the auger itself. Make sure the auger spins freely and isn't binding. Also, check for any sharp edges or obstructions that could be damaging the cable. You may also need to inspect the snow blower skid shoes and adjust them so they do not impede the auger.
Brand-Specific Considerations
While the general process for replacing a snow blower auger cable is similar across different brands, there may be some model-specific variations. Here are a few things to keep in mind for some popular brands:
- Toro: Toro snow blowers often use a slightly different cable attachment mechanism. Refer to your Toro owner's manual for specific instructions. We carry a wide range of Toro snow blower parts.
- Craftsman: Craftsman snow blowers are known for their accessibility. However, the cable routing might be a bit complex. Pay close attention when removing the old cable. Check out our selection of Craftsman snow blower parts.
- Ariens: Ariens snow blowers are built to last, but the auger cable can still wear out over time. Use high-quality replacement cables to ensure long-lasting performance.
- Cub Cadet: Cub Cadet snow blowers sometimes use a more robust cable with a thicker gauge. Make sure you get the correct replacement cable for your model.
Remember to consult your owner's manual for the most accurate and detailed instructions for your specific snow blower model. Don't forget that Madison Tractor Company offers a wide variety of Murray snow blower parts and other brands.
Maintaining Your Snow Blower Auger Cable
Proper maintenance can extend the life of your snow blower auger cable. Here are a few tips:
- Inspect the cable regularly: Look for signs of wear, fraying, or kinks.
- Lubricate the cable: Apply a light coat of lubricant to the cable periodically to keep it moving smoothly.
- Adjust the cable tension: Keep the cable tension properly adjusted to prevent excessive wear.
- Store your snow blower properly: Store your snow blower in a dry place to prevent rust and corrosion.
By following these tips, you can help ensure that your snow blower auger cable lasts longer and performs reliably. Regularly replacing other wear items like snow blower paddles will ensure your machine lasts for years.
Shop snow blower parts at Madison Tractor Company
At Madison Tractor Company, we're committed to providing you with the highest quality replacement parts for your outdoor power equipment. Whether you need a snow blower auger cable, belts, blades, spindles, pulleys, filters, spark plugs, bearings, or shear pins, we have you covered. Browse our wide selection of parts for John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, and many other brands. Shop with confidence knowing that you're getting the best parts at the best prices. We ship quickly so you can get back to clearing snow in no time! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Snow Blower Parts Guide: Find Replacement Parts by Brand & Model














