Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

New Holland Baler Knotter Parts: BB & BC Models

Keep your New Holland BB or BC series baler running smoothly with our comprehensive guide to knotter parts. Learn about common issues, maintenance tips, and how to select the right replacement parts to minimize downtime during hay season.

The knotter is the heart of any square baler, and when it fails, your entire hay operation grinds to a halt. New Holland BB and BC series balers are known for their reliability, but like any machine, they require regular maintenance and occasional repairs. This guide will help you understand the common issues with New Holland knotters on BB and BC models and how to find the right new holland knotter parts to keep your baler running at peak performance.

Recommended Parts for This Guide

2 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

For more information on knotters in general, see our guide to baler knotter parts.

Understanding New Holland BB & BC Knotter Systems

The New Holland BB and BC series square balers utilize a robust knotter system, but there are slight variations between models. Understanding these differences is crucial when ordering replacement parts. These balers rely on a dual knotter system to efficiently tie bales of hay, straw, or other forages. Common components include:

  • Knotter Frame: The main structural element that supports all other knotter components.
  • Knotter Hook (Billhook): Grabs the twine, forms the loop, and holds it while the knot is tied.
  • Twine Disc (Retainer): Holds the twine in place during the knotting process.
  • Knotter Cam: Controls the timing and movement of the knotter components.
  • Knife Arm & Knife: Cuts the twine after the knot is tied.
  • Wiper Arm: Cleans the knotter hook and ensures smooth twine release.
  • Needle Yoke & Needles: Deliver twine to the knotters.
  • Tension Springs: Maintain proper twine tension for consistent knot formation.

Specific parts numbers vary based on the exact model and year of your baler. Always consult your New Holland operator's manual for the correct part numbers or contact a knowledgeable parts supplier like Madison Tractor Company for assistance. We carry a wide range of parts for New Holland, John Deere, Case IH, Massey Ferguson, and other major brands. We stock commonly needed parts such as baler pickup teeth, but can also help you locate less common components.

Common New Holland Knotter Problems and Solutions

Several factors can contribute to knotter malfunctions. Identifying the root cause is the first step toward effective repair. Here are some typical problems you might encounter:

  • Missed Knots: This is often caused by incorrect twine tension, worn knotter bills, or a misaligned knife.
  • Broken Twine: Excessive twine tension, dull knives, or rough twine discs can lead to twine breakage.
  • Loose Knots: Insufficient twine tension, worn springs, or a slipping knotter cam can result in loose knots.
  • Twine Wrapping Around Knotter Parts: This can be caused by a bent wiper arm, worn twine discs, or excessive debris buildup.
  • Uneven Bale Length: This may not always be knotter related, but can result from inconsistent feeding or issues with the measuring wheel. Always check that your baler pickup teeth are in good condition to ensure consistent feeding.

Troubleshooting Tips:

  1. Inspect Twine Tension: Ensure the twine tension is set correctly according to your baler's operator manual. Use a twine tension gauge for accurate measurements.
  2. Check Knotter Bills: Look for wear, cracks, or damage. Replace worn knotter bills immediately. A worn billhook, for example, can be replaced with a new one like the 86547610.
  3. Examine Twine Discs: Inspect the twine discs for rough edges or grooves that could damage the twine. Clean or replace them as needed.
  4. Sharpen or Replace Knives: Dull knives can cause twine breakage and missed knots. Sharpen regularly or replace worn knives.
  5. Clean the Knotter Assembly: Remove any accumulated debris, such as hay, straw, or twine scraps, from the knotter assembly. A clean knotter is a happy knotter.
  6. Lubricate Moving Parts: Regularly lubricate all moving parts of the knotter assembly with a high-quality lubricant. Refer to your operator's manual for recommended lubrication points and intervals.

Safety Warning: Always disengage the PTO and shut off the tractor engine before performing any maintenance or repairs on the baler knotter system. Failure to do so could result in serious injury or death.

New Holland BB & BC Knotter Parts Identification and Replacement

When replacing knotter parts, it's essential to use high-quality replacements that meet or exceed OEM specifications. Madison Tractor Company offers a wide selection of new holland knotter parts for BB and BC series balers from trusted manufacturers, as well as parts compatible with other brands like John Deere and Case IH.

Here's a breakdown of common knotter parts and how to identify the correct replacement:

  • Knotter Bills (Billhooks): Identify the correct billhook by comparing it to the old part or consulting your operator's manual. Note the specific model and year of your baler, as billhook designs can vary.
  • Twine Discs (Retainers): Check the diameter, thickness, and number of grooves on the old twine disc. Ensure the replacement matches these specifications.
  • Knotter Knives: Compare the length, width, and mounting holes of the old knife to the new one. Make sure the replacement knife is sharp and made of durable steel.
  • Wiper Arms: Ensure the replacement wiper arm has the same shape and dimensions as the old one. The wiper arm should properly clean the knotter hook without causing damage.
  • Springs: Check the length, diameter, and wire gauge of the old spring. The replacement spring should have the same characteristics to maintain proper tension.

Example Part Numbers (verify these against your specific model):

  • Knotter Bill (Hook): May be replaced with 86547610 or similar, depending on model.
  • Twine Disc Assembly: Varies widely, check your parts diagram.
  • Knotter Knife: Common replacements might be cross-referenced to aftermarket equivalents.

Replacement Procedure (General):

  1. Preparation: Disengage the PTO, shut off the tractor engine, and engage the parking brake.
  2. Removal: Carefully remove the old part using appropriate tools. Take note of the orientation and position of the part before removal.
  3. Installation: Install the new part in the same orientation and position as the old one. Tighten all fasteners to the manufacturer's specified torque. Consult your operator's manual for torque specifications.
  4. Adjustment: Adjust the knotter system as needed to ensure proper operation. Refer to your operator's manual for adjustment procedures.
  5. Testing: After replacing a knotter part, test the baler by making a few bales of hay. Observe the knotting process to ensure the new part is functioning correctly.

Torque Specifications: Consult your New Holland operator's manual for specific torque values for all fasteners on the knotter assembly. Using the correct torque is crucial for preventing loosening or damage to the components.

Preventative Maintenance for Extending Knotter Life

Regular preventative maintenance is crucial for extending the life of your New Holland BB or BC series knotter system. Here are some essential maintenance tasks:

  • Daily Inspection: Before each day of baling, inspect the knotter assembly for any signs of wear, damage, or debris buildup.
  • Lubrication: Lubricate all moving parts of the knotter assembly according to the manufacturer's recommendations. Use a high-quality lubricant that is specifically designed for agricultural equipment.
  • Twine Quality: Use high-quality baler twine that is appropriate for your baler and the type of material you are baling. Poor-quality twine can cause knotter malfunctions and increase wear on knotter components. Refer to our guide to baler twine for more information.
  • Storage: When storing your baler for the off-season, thoroughly clean and lubricate the knotter assembly. Cover the baler to protect it from the elements.

By following these preventative maintenance tips, you can significantly reduce the risk of knotter malfunctions and extend the life of your New Holland BB or BC series baler. When it comes to other parts, like round baler belts, regular inspection is key as well.

Finding the Right Parts at Madison Tractor Company

Madison Tractor Company is your trusted source for new holland knotter parts and other agricultural equipment parts. We offer a wide selection of high-quality replacement parts for New Holland, John Deere, Case IH, Massey Ferguson, Kubota, Allis Chalmers, Deutz, International Harvester, Oliver, White, Gleaner, Vermeer, Hesston, Mahindra, and Zetor balers. Whether you need radiators, water pumps, starters, alternators, hydraulic pumps, cylinders, clutch kits, PTO parts, fuel pumps, carburetors, injectors, filters, gaskets, pistons, bearings, seals, or belts, we have the parts you need to keep your equipment running smoothly. We can even help you locate hard-to-find parts for older models.

Our knowledgeable parts experts are available to assist you in finding the correct parts for your specific baler model and application. We can also provide technical assistance and troubleshooting tips to help you diagnose and repair knotter problems. With the right new holland knotter parts, you can minimize downtime and maximize your productivity during hay season.

Don't let a knotter malfunction ruin your hay harvest. Contact Madison Tractor Company today and let us help you find the parts you need to keep your New Holland BB or BC series baler running at peak performance. Shop New Holland parts at Madison Tractor You can also use our AI-Powered Part Finder to search for parts by your specific make and model.