Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Small Engine Camshaft: Briggs, Kohler & Kawasaki

The camshaft is a crucial component in your small engine. This guide covers the camshaft's function, common problems, troubleshooting tips, and replacement procedures for popular engines like Briggs & Stratton, Kohler, and Kawasaki. Keep your lawn mower running smoothly!

Understanding Your Small Engine Camshaft

The small engine camshaft is a vital component within your engine. Its primary role is to control the opening and closing of the intake and exhaust valves in precise synchronization with the piston's movement. This synchronized valve timing allows the engine to efficiently draw in fuel and air, compress the mixture, combust it to generate power, and then expel the exhaust gases.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

Think of the camshaft as the conductor of an engine's combustion symphony. It’s a rotating shaft with lobes (cams) that push on valve lifters or tappets, which in turn operate the valves. The shape and position of these lobes dictate the timing and duration of valve opening, directly influencing engine performance, fuel efficiency, and overall power output. A worn or damaged camshaft can lead to a variety of issues, including reduced power, poor fuel economy, and difficulty starting.

Common Symptoms of a Faulty Camshaft

Recognizing the signs of a failing camshaft is crucial for preventing further engine damage. Here are some common symptoms to watch out for:

  • Reduced Engine Power: A worn camshaft can cause valves to open and close improperly, leading to a decrease in power, especially at higher RPMs. You might notice your John Deere riding mower struggling to climb hills or your Hustler zero turn mower feeling sluggish.
  • Rough Idling: Improper valve timing can result in an uneven or rough idle. The engine might shake or vibrate excessively.
  • Backfiring: A damaged camshaft can cause incomplete combustion, leading to backfiring through the carburetor or exhaust. Consider inspecting your Briggs & Stratton carburetor or Kawasaki engine carburetor for related issues.
  • Increased Fuel Consumption: Inefficient combustion due to improper valve timing can result in higher fuel consumption.
  • Ticking or Clicking Noises: While not always camshaft-related, unusual ticking or clicking noises from the engine could indicate worn valve lifters or excessive valve lash caused by a worn cam lobe.
  • Difficulty Starting: In severe cases, a badly worn camshaft can prevent the engine from starting altogether.

Diagnosing Camshaft Problems

If you suspect a problem with your small engine's camshaft, here's a basic diagnostic approach:

  1. Visual Inspection: Remove the valve cover and inspect the valve train (rocker arms, pushrods, and valve springs). Look for broken or damaged components. Rotate the engine manually and observe the movement of the valves. Do they move smoothly and consistently? Are any pushrods bent?
  2. Compression Test: Perform a compression test to assess the health of the cylinders. Low compression in one or more cylinders can indicate valve problems related to camshaft wear or damage.
  3. Valve Lash Adjustment: Check and adjust the valve lash (the clearance between the rocker arm and the valve stem) according to the engine manufacturer's specifications. Incorrect valve lash can mimic the symptoms of a worn camshaft.
  4. Camshaft Lobe Inspection: This requires removing the camshaft. Carefully inspect the lobes for wear, pitting, or damage. Compare the lobe heights to the manufacturer's specifications. Significant wear indicates the need for replacement.

Safety Warning: Always disconnect the spark plug wire before working on your engine to prevent accidental starting. Allow the engine to cool completely before disassembling it.

Replacing a Small Engine Camshaft: A Step-by-Step Guide

Replacing a camshaft requires some mechanical skill and knowledge. If you're not comfortable performing this task yourself, it's best to take your equipment to a qualified mechanic. However, if you're confident in your abilities, here's a general guide:

  1. Gather Your Tools and Parts: You'll need a socket set, wrench set, screwdrivers, pliers, a torque wrench, plastigage (for measuring bearing clearances), new gaskets, engine oil, and of course, a new small engine camshaft compatible with your engine model. Ensure you have the correct camshaft for your Briggs & Stratton, Kohler, or Kawasaki engine.
  2. Disassemble the Engine: This typically involves removing the engine from the equipment (e.g., your Craftsman lawn tractor or Toro snow blower), draining the oil, removing the carburetor, muffler, cylinder head, and other components necessary to access the camshaft. Refer to your engine's service manual for specific instructions. You might need to replace the Briggs & Stratton head gasket or Kohler fuel pump depending on condition.
  3. Remove the Old Camshaft: Carefully remove the old camshaft, noting the position of any timing marks or gears. Some engines have a camshaft bearing that needs to be pressed out.
  4. Inspect the Camshaft Bearings: Check the camshaft bearings for wear or damage. Replace them if necessary.
  5. Install the New Camshaft: Lubricate the new camshaft with engine oil and carefully install it, aligning the timing marks or gears according to the engine manufacturer's specifications. Incorrect timing can severely damage your engine.
  6. Reassemble the Engine: Reinstall all the components you removed in the reverse order. Use new gaskets to prevent leaks. Torque all bolts to the manufacturer's specifications.
  7. Adjust Valve Lash: Adjust the valve lash to the correct specifications.
  8. Refill with Oil: Fill the engine with fresh engine oil to the proper level.
  9. Start the Engine: Start the engine and listen for any unusual noises. Check for leaks.

Camshafts for Specific Engine Brands

Briggs & Stratton Camshafts

Briggs & Stratton engines are widely used in lawn mowers, pressure washers, and other outdoor power equipment. When replacing a Briggs & Stratton camshaft, it's crucial to identify the correct part number based on your engine's model and type number. Madison Tractor Company carries a wide selection of Briggs & Stratton camshafts for various engine models. Don't forget to inspect your Briggs carburetor rebuild kit while you're at it.

Kohler Camshafts

Kohler engines are known for their reliability and performance. They are commonly found in riding mowers, generators, and other commercial equipment. Selecting the correct Kohler camshaft is essential for optimal engine performance. We offer camshafts for Kohler Courage, Command, and other engine series. Be sure to check your Kohler carburetor as well!

Kawasaki Camshafts

Kawasaki engines are often used in high-performance equipment like zero-turn mowers and utility vehicles. Replacing a Kawasaki camshaft requires precision and attention to detail. Madison Tractor Company provides camshafts for Kawasaki FR, FS, and FX series engines. Replacing your Kawasaki engine carburetor can also help maximize performance.

Preventative Maintenance to Extend Camshaft Life

  • Use High-Quality Oil: Always use the recommended type and weight of engine oil for your specific engine. Change the oil regularly according to the manufacturer's recommendations.
  • Maintain Proper Oil Level: Regularly check the oil level and add oil as needed. Running the engine with low oil can cause excessive wear on the camshaft and other engine components.
  • Keep the Engine Clean: Clean the engine regularly to prevent dirt and debris from entering the engine and causing wear.
  • Proper Storage: When storing your equipment for extended periods, use a fuel stabilizer and fog the engine to prevent corrosion.

Remember to inspect other wear parts on your outdoor power equipment regularly. Belts, blades, spindles, pulleys, filters, spark plugs, bearings, and shear pins all contribute to overall performance and longevity.

Shop for Small Engine Camshafts and Parts at Madison Tractor Company

At Madison Tractor Company, we offer a wide selection of high-quality small engine parts, including camshafts for Briggs & Stratton, Kohler, and Kawasaki engines. We carry parts for popular brands like John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, and Dixie Chopper. Our knowledgeable staff is here to help you find the right parts for your equipment. Visit our website today to browse our extensive inventory and keep your outdoor power equipment running smoothly! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.