Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

John Deere 70 Tractor Parts

Shop John Deere 70 Tractor parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.

The John Deere 70 tractor, manufactured from 1956 to 1958, was a workhorse for American farmers. Powered by a potent 50 HP two-cylinder gasoline or LP-Gas engine, the 70 delivered ample power for a variety of field tasks. Its robust design and reliable performance made it a favorite for plowing, cultivating, and other essential farming operations, especially due to its PTO horsepower capable of handling demanding implements.

About the 70

The John Deere 70 was introduced in 1956 as a replacement for the Model 720, marking a significant step forward in tractor technology. Production continued until 1958. The tractor was available with either a two-cylinder gasoline or LP-Gas engine. The gasoline engine, with a displacement of 361 cubic inches, produced around 50 horsepower. A notable feature of the 70 was its six-speed transmission, providing a versatile range of speeds for different applications. It also came standard with a 540 RPM PTO, delivering approximately 43 horsepower at the PTO shaft. Hydraulic capacity was approximately 14 GPM with typically 1 or 2 remote valves. The 70 featured a Category II 3-point hitch, allowing it to handle a wide array of implements. Commonly used for row crop operations, hay baling, and general tillage, the John Deere 70 distinguished itself from other tractors in its class through its dependable engine and robust transmission, making it a go-to choice for many farmers during its production years.

70 Specifications

EngineJohn Deere 50 HP 361 ci Gasoline/LP-Gas
PTO HP43 HP @ 540 RPM
TransmissionGear 6-speed
Hydraulics14 GPM, 1-2 remotes
3-Point HitchCategory II, 2800 lbs lift capacity
Fuel Capacity28 gallons
Weight6500 lbs
Years Produced1956-1958

70 Maintenance Tips

  • Change engine oil and filter every 125 hours of operation or annually, using the recommended oil type and filter for optimal engine performance.
  • Regularly inspect hydraulic fluid levels and check for leaks. Change hydraulic filters every 250 hours to prevent contamination and maintain hydraulic system efficiency.
  • Periodically clean the fuel sediment bowl and replace the fuel filter to ensure a clean fuel supply, preventing engine problems.
  • Before storing the tractor for the off-season, drain the fuel tank and carburetor to prevent fuel degradation and corrosion. Add fuel stabilizer if leaving fuel in the tank.

70 History & Background

The John Deere 70 was launched in 1956 as a replacement for the John Deere 720 and quickly became a popular tractor among farmers. It represented John Deere's commitment to providing reliable and powerful tractors that met the evolving needs of agriculture. The John Deere 70 played a significant role in advancing farming practices in the mid-20th century.

Frequently Asked Questions

Which fuel lift pump is suitable for the John Deere 70?

For the John Deere 70, the RE27667 - Pump, Fuel Lift Transfer is a suitable replacement.

What starter solenoid is recommended for the John Deere 70?

The RE13732 - Starter Solenoid (12 Volt) is a recommended replacement part for the John Deere 70.

Which ignition coil is appropriate for the John Deere 70?

The AR46064 - Ignition Coil - 6 Volt or 12 Volt w/ Resistor is compatible with the John Deere 70.

What are some commonly replaced parts for the John Deere 70?

Showing 1-24 of 379 products
RE520036 - Rear Crankshaft Seal

RE520036 - Rear Crankshaft Seal

SKU: RE520036

$39.33

236 in stock

RE27667 - Fuel Lift Transfer Pump

RE27667 - Fuel Lift Transfer Pump

SKU: RE27667

$63.09

2834 in stock

RE19778 - Turbocharger

RE19778 - Turbocharger

SKU: RE19778

$562.50

133 in stock

T20129 - Valve Stem Cap

T20129 - Valve Stem Cap

SKU: T20129

$5.13

155 in stock

T20077 - Valve Keeper

T20077 - Valve Keeper

SKU: T20077

$0.64

1248 in stock

T19854 - O-ring

T19854 - O-ring

SKU: T19854

$0.96

246 in stock

RE65265 - Hand Primer

RE65265 - Hand Primer

SKU: RE65265

$28.13

176 in stock

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket

SKU: RE62777

$4.56

896 in stock

RE53422 - Crankshaft w/ A-R26049 Gear

RE53422 - Crankshaft w/ A-R26049 Gear

SKU: RE53422

$2493.67

42 in stock

RE524105 - Oil Cooler To Block Gasket

RE524105 - Oil Cooler To Block Gasket

SKU: RE524105

$6.71

205 in stock

RE22764 - Rear Crankshaft Seal

RE22764 - Rear Crankshaft Seal

SKU: RE22764

$39.33

236 in stock

JD8210 - TIMKEN CUP

JD8210 - TIMKEN CUP

SKU: JD8210

$20.53

97 in stock

60381 - Tie Rod Boot

60381 - Tie Rod Boot

SKU: 60381

$5.25

249 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD

SKU: U12331

$3.64

356 in stock

R56757 - Durometer 75 (2/Pack) .139" Thick O-Ring; 3.609" ID X 3.887" OD

R56757 - Durometer 75 (2/Pack) .139" Thick O-Ring; 3.609" ID X 3.887" OD

SKU: R56757

$5.29

202 in stock

R56462 - Durometer 75 (5/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD

R56462 - Durometer 75 (5/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD

SKU: R56462

$1.07

115 in stock

R51603 - Durometer 70 (10/Pack) O-Ring; .612" ID X .818" OD X .103" Thick

R51603 - Durometer 70 (10/Pack) O-Ring; .612" ID X .818" OD X .103" Thick

SKU: R51603

$0.53

240 in stock

R459R - Durometer 70 (25/Pack) .103" Thick O-Ring; .549" ID X .755 OD

R459R - Durometer 70 (25/Pack) .103" Thick O-Ring; .549" ID X .755 OD

SKU: R459R

$0.84

250 in stock

R29463 - Durometer 75 (5/Pack) .139" Thick O-Ring; 1.234" ID X 1.512" OD

R29463 - Durometer 75 (5/Pack) .139" Thick O-Ring; 1.234" ID X 1.512" OD

SKU: R29463

$2.36

280 in stock

R26282 - Durometer 70 (4/Pack) .139" Thick O-Ring; 2.109" ID X 2.387" OD

R26282 - Durometer 70 (4/Pack) .139" Thick O-Ring; 2.109" ID X 2.387" OD

SKU: R26282

$2.66

92 in stock

R21722 - Durometer 90 (5/Pack) .139" Thick O-Ring; .796" ID X 1.074" OD

R21722 - Durometer 90 (5/Pack) .139" Thick O-Ring; .796" ID X 1.074" OD

SKU: R21722

$1.15

65 in stock

R1225R - Durometer 75 (5/ Pack) O-Ring; 1.171" ID X 1.449" OD X .139" Thick

R1225R - Durometer 75 (5/ Pack) O-Ring; 1.171" ID X 1.449" OD X .139" Thick

SKU: R1225R

$2.56

535 in stock

P46051 - Durometer 70 (10/Pack) .103" Thick O-Ring;  .424" ID X  .630" OD

P46051 - Durometer 70 (10/Pack) .103" Thick O-Ring; .424" ID X .630" OD

SKU: P46051

$0.71

180 in stock

F3353R - Durometer 75 (10/Pack) O-Ring; .362" ID X .568" OD X .103" Thick

F3353R - Durometer 75 (10/Pack) O-Ring; .362" ID X .568" OD X .103" Thick

SKU: F3353R

$1.00

540 in stock