John Deere 70 Tractor Parts
Shop John Deere 70 Tractor parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The John Deere 70 tractor, manufactured from 1956 to 1958, was a workhorse for American farmers. Powered by a potent 50 HP two-cylinder gasoline or LP-Gas engine, the 70 delivered ample power for a variety of field tasks. Its robust design and reliable performance made it a favorite for plowing, cultivating, and other essential farming operations, especially due to its PTO horsepower capable of handling demanding implements.
About the 70
The John Deere 70 was introduced in 1956 as a replacement for the Model 720, marking a significant step forward in tractor technology. Production continued until 1958. The tractor was available with either a two-cylinder gasoline or LP-Gas engine. The gasoline engine, with a displacement of 361 cubic inches, produced around 50 horsepower. A notable feature of the 70 was its six-speed transmission, providing a versatile range of speeds for different applications. It also came standard with a 540 RPM PTO, delivering approximately 43 horsepower at the PTO shaft. Hydraulic capacity was approximately 14 GPM with typically 1 or 2 remote valves. The 70 featured a Category II 3-point hitch, allowing it to handle a wide array of implements. Commonly used for row crop operations, hay baling, and general tillage, the John Deere 70 distinguished itself from other tractors in its class through its dependable engine and robust transmission, making it a go-to choice for many farmers during its production years.
70 Specifications
| Engine | John Deere 50 HP 361 ci Gasoline/LP-Gas |
|---|---|
| PTO HP | 43 HP @ 540 RPM |
| Transmission | Gear 6-speed |
| Hydraulics | 14 GPM, 1-2 remotes |
| 3-Point Hitch | Category II, 2800 lbs lift capacity |
| Fuel Capacity | 28 gallons |
| Weight | 6500 lbs |
| Years Produced | 1956-1958 |
70 Maintenance Tips
- Change engine oil and filter every 125 hours of operation or annually, using the recommended oil type and filter for optimal engine performance.
- Regularly inspect hydraulic fluid levels and check for leaks. Change hydraulic filters every 250 hours to prevent contamination and maintain hydraulic system efficiency.
- Periodically clean the fuel sediment bowl and replace the fuel filter to ensure a clean fuel supply, preventing engine problems.
- Before storing the tractor for the off-season, drain the fuel tank and carburetor to prevent fuel degradation and corrosion. Add fuel stabilizer if leaving fuel in the tank.
70 History & Background
The John Deere 70 was launched in 1956 as a replacement for the John Deere 720 and quickly became a popular tractor among farmers. It represented John Deere's commitment to providing reliable and powerful tractors that met the evolving needs of agriculture. The John Deere 70 played a significant role in advancing farming practices in the mid-20th century.
Frequently Asked Questions
Which fuel lift pump is suitable for the John Deere 70?
For the John Deere 70, the RE27667 - Pump, Fuel Lift Transfer is a suitable replacement.
What starter solenoid is recommended for the John Deere 70?
The RE13732 - Starter Solenoid (12 Volt) is a recommended replacement part for the John Deere 70.
Which ignition coil is appropriate for the John Deere 70?
The AR46064 - Ignition Coil - 6 Volt or 12 Volt w/ Resistor is compatible with the John Deere 70.
What are some commonly replaced parts for the John Deere 70?
Commonly replaced parts for the John Deere 70 include the TY6075 - Spark Plug, 1909008 - Cap, Distributor (6 Volt), and RE336111 - Lamp, Worklight; LED, Flood. Other frequent replacements are the R83021 - Gasket, Exhaust Manifold, RE29784 - Clutch Disc, Powershaft, and R110464 - Brake Pads, Metallic.

RE520036 - Rear Crankshaft Seal
SKU: RE520036
236 in stock

RE27667 - Fuel Lift Transfer Pump
SKU: RE27667
2834 in stock

RE19778 - Turbocharger
SKU: RE19778
133 in stock

T20129 - Valve Stem Cap
SKU: T20129
155 in stock

T20077 - Valve Keeper
SKU: T20077
1248 in stock

T19854 - O-ring
SKU: T19854
246 in stock

RE65265 - Hand Primer
SKU: RE65265
176 in stock

RE62777 - Exhaust Manifold; Outer (2/Pack) Gasket
SKU: RE62777
896 in stock

RE53422 - Crankshaft w/ A-R26049 Gear
SKU: RE53422
42 in stock

RE524105 - Oil Cooler To Block Gasket
SKU: RE524105
205 in stock

RE22764 - Rear Crankshaft Seal
SKU: RE22764
236 in stock

JD8210 - TIMKEN CUP
SKU: JD8210
97 in stock

60381 - Tie Rod Boot
SKU: 60381
249 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD
SKU: U12331
356 in stock

R56757 - Durometer 75 (2/Pack) .139" Thick O-Ring; 3.609" ID X 3.887" OD
SKU: R56757
202 in stock

R56462 - Durometer 75 (5/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD
SKU: R56462
115 in stock

R51603 - Durometer 70 (10/Pack) O-Ring; .612" ID X .818" OD X .103" Thick
SKU: R51603
240 in stock

R459R - Durometer 70 (25/Pack) .103" Thick O-Ring; .549" ID X .755 OD
SKU: R459R
250 in stock

R29463 - Durometer 75 (5/Pack) .139" Thick O-Ring; 1.234" ID X 1.512" OD
SKU: R29463
280 in stock

R26282 - Durometer 70 (4/Pack) .139" Thick O-Ring; 2.109" ID X 2.387" OD
SKU: R26282
92 in stock

R21722 - Durometer 90 (5/Pack) .139" Thick O-Ring; .796" ID X 1.074" OD
SKU: R21722
65 in stock

R1225R - Durometer 75 (5/ Pack) O-Ring; 1.171" ID X 1.449" OD X .139" Thick
SKU: R1225R
535 in stock

P46051 - Durometer 70 (10/Pack) .103" Thick O-Ring; .424" ID X .630" OD
SKU: P46051
180 in stock

F3353R - Durometer 75 (10/Pack) O-Ring; .362" ID X .568" OD X .103" Thick
SKU: F3353R
540 in stock








