John Deere 3020 Tractor Parts

3020 parts and accessories

The John Deere 3020, manufactured from 1964 to 1972, was a workhorse for farmers across the nation. Powered by a reliable John Deere diesel or gasoline engine producing around 59 horsepower, the 3020 delivered approximately 53 PTO horsepower. Its versatility and dependability made it a popular choice for a wide range of agricultural tasks.

The John Deere 3020 was introduced in 1964 as part of the 'New Generation' series, replacing the 3010. Available in various configurations including row-crop, utility, and orchard models, it quickly gained favor for its improved power and operator comfort. Engine options included a 270 cubic inch John Deere diesel engine producing roughly 59 horsepower and a similar sized gasoline engine. The transmission was typically a Syncro-Range gear transmission with 8 forward and 2 reverse speeds, providing a good range of working gears. It also came with a Powr-Shift option. The 3020's PTO delivered approximately 53 horsepower at 540 RPM. Its hydraulic system had a capacity of around 16 gallons per minute, feeding two rear remotes. A Category II 3-point hitch provided ample lifting capacity. This tractor was commonly used for row crop cultivation, hay baling, livestock feeding, and light tillage. What distinguished the 3020 from other models in the John Deere lineup of the era was its improved hydraulics, powerful engine and excellent gear selection.

Specifications

Engine	John Deere 59 HP Diesel/Gas
PTO HP	53 HP @ 540 RPM
Transmission	Syncro-Range (8F/2R) or Powr-Shift
Hydraulics	16 GPM, 2 remotes
3-Point Hitch	Category II, 3200 lbs lift capacity
Fuel Capacity	25 gallons
Weight	6300 lbs
Years Produced	1964-1972

Maintenance Tips

Engine Oil & Filter: Change engine oil and filter every 250 hours of operation using the recommended John Deere oil and filter.
Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours. Use only John Deere Hy-Gard hydraulic fluid.
Fuel System: Drain water and sediment from the fuel tank regularly. Replace the fuel filter every 250 hours to prevent fuel system issues.
Seasonal Storage: Before storing the tractor for the winter, drain all fluids, add fuel stabilizer to the fuel tank, and grease all lubrication points. Disconnect the battery and store it in a cool, dry place.

History & Background

Introduced in 1964 as part of John Deere's "New Generation" tractors, the 3020 replaced the 3010 and brought improvements in power and hydraulics. While there weren't major redesigns during its production run, minor refinements were made to improve reliability and operator comfort. The John Deere 3020 remains a significant tractor in agricultural history, representing a shift towards more powerful and technologically advanced farm equipment.

Frequently Asked Questions

What engine is in the John Deere 3020?

The John Deere 3020 was available with either a 270 cubic inch John Deere diesel engine or a 270 cubic inch John Deere gasoline engine, both producing approximately 59 horsepower.

What is the PTO horsepower on a 3020?

The John Deere 3020 has a PTO horsepower rating of approximately 53 horsepower, operating at 540 RPM.

What oil filter fits the 3020?

The John Deere 3020 typically uses a John Deere oil filter part number AR51786. Cross-references include Wix 51794 or Fram PH2951A. Always verify fitment with your specific tractor's manual.

What are common parts needed for the 3020?

Common wear parts for the John Deere 3020 include engine oil filters, fuel filters, air filters, hydraulic filters, fan belts, hydraulic seals, steering components (tie rod ends), clutch discs, and pressure plates.

Showing 1-24 of 603 products

Sort by: