(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 3288 Tractor Parts

3288 parts and accessories

The Case IH 3288 tractor, manufactured from 1981 to 1984, was a popular choice for farmers needing a reliable utility tractor. Powered by an International Harvester D-358 diesel engine producing around 70 horsepower, the 3288 delivered dependable performance. Its robust PTO, rated at approximately 63 horsepower, made it well-suited for a variety of farming tasks.

The Case IH 3288 was introduced in 1981 as part of the International Harvester (later Case IH) 88 Series tractor lineup, succeeding earlier models and offering updated features. Production continued until 1984. The 3288 is equipped with an International Harvester D-358 5.9L (358 cu in) six-cylinder diesel engine, producing approximately 70 horsepower. The engine's displacement and diesel fuel system contributed to its fuel efficiency and durability. It features a gear-type transmission with options for either 8 forward and 4 reverse speeds, or 16 forward and 8 reverse speeds with the addition of a creeper gear. The PTO is rated at 63 horsepower, with a standard 540 RPM PTO speed. Hydraulic capacity is around 12 GPM, providing adequate power for implements. The 3-point hitch is a Category II, offering a lift capacity of approximately 3,800 lbs. The Case IH 3288 was commonly used for row crop work, hay baling, livestock feeding, and general tillage operations. Compared to smaller models in the 88 series, the 3288 provided more power and hydraulic capacity, while remaining more compact and maneuverable than larger row-crop tractors.

Specifications

EngineInternational Harvester D-358 70 HP Diesel
PTO HP63 HP @ 540 RPM
TransmissionGear Type, 8F/4R or 16F/8R (with creeper)
Hydraulics12 GPM, 2 remotes
3-Point HitchCategory II, 3800 lbs
Fuel Capacity28 gallons
Weight7,100 lbs
Years Produced1981-1984

Maintenance Tips

  • Engine Oil & Filter: Change the engine oil and filter every 250 hours of operation using high-quality diesel engine oil meeting API CF-4 or higher specifications.
  • Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours. Use only approved hydraulic fluid to prevent damage to the system.
  • Fuel System: Drain the fuel tank annually to remove water and sediment. Replace the fuel filter every 250 hours to ensure proper fuel flow and prevent injector issues.
  • Seasonal Storage: Before storing the tractor for the off-season, fill the fuel tank to prevent condensation, change the engine oil, and lubricate all grease fittings. Disconnect the battery and store it in a cool, dry place.

History & Background

The Case IH 3288 was introduced in 1981 as part of the International Harvester 88 Series tractors. These tractors aimed to offer improved operator comfort and updated styling compared to previous IH models. The 3288, along with other tractors in the 88 Series, played a significant role in transitioning International Harvester's tractor lineup before the Case acquisition.

Frequently Asked Questions

What engine is in the Case Ih 3288?

The Case IH 3288 is equipped with an International Harvester D-358, a 5.9L (358 cu in) six-cylinder diesel engine producing approximately 70 horsepower.

What is the PTO horsepower on a 3288?

The Case IH 3288 has a PTO horsepower rating of approximately 63 horsepower at 540 RPM.

What oil filter fits the 3288?

The Case IH 3288 typically uses a Fleetguard LF3349 or a Baldwin BD103 oil filter. Cross-references include Wix 51794 and NAPA 1794.

What are common parts needed for the 3288?

Common wear parts for the Case IH 3288 include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic cylinder seal kits, tie rod ends, clutch discs, and brake components.

Showing 265-288 of 357 products
3132428R2 - Fuel Filter

3132428R2 - Fuel Filter

SKU: 3132428R2

$15.45

214 in stock

3132428R1 - FUEL FILTER

3132428R1 - FUEL FILTER

SKU: 3132428R1

$15.45

214 in stock

109240C1 - Air Recirculation Filter

109240C1 - Air Recirculation Filter

SKU: 109240C1

$10.00

95 in stock

WBKIH3 - Wheel Bearing Kit

WBKIH3 - Wheel Bearing Kit

SKU: WBKIH3

$38.47

225 in stock

SBBSKIT07 - Bearing & Seal Spindle Bushing Kit
Out of Stock

SBBSKIT07 - Bearing & Seal Spindle Bushing Kit

SKU: SBBSKIT07

$64.88

Out of stock

DANAH2246C - King Pin; .010" Shim

DANAH2246C - King Pin; .010" Shim

SKU: DANAH2246C

$7.17

122 in stock

87538419 - Tie Rod Dust Seal

87538419 - Tie Rod Dust Seal

SKU: 87538419

$5.25

545 in stock

87016563 - Slotted; 7/8"-14 Nut

87016563 - Slotted; 7/8"-14 Nut

SKU: 87016563

$4.26

397 in stock

86505028 - King Pin; .005" Shim

86505028 - King Pin; .005" Shim

SKU: 86505028

$4.01

234 in stock

80446C91 - Steering Cylinder Repair Kit

80446C91 - Steering Cylinder Repair Kit

SKU: 80446C91

$72.15

201 in stock

71820C91 - Cylinder End

71820C91 - Cylinder End

SKU: 71820C91

$63.78

68 in stock

71788C1 - Center Steering Arm Bushing

71788C1 - Center Steering Arm Bushing

SKU: 71788C1

$13.54

179 in stock

71787C91 - Center Steering Arm

71787C91 - Center Steering Arm

SKU: 71787C91

$387.67

46 in stock

71785VSR - RH Steering Arm TAPER-LOK Upright Shaft

71785VSR - RH Steering Arm TAPER-LOK Upright Shaft

SKU: 71785VSR

$144.90

3 in stock

71785VSL - LH Steering Arm TAPER-LOK Upright Shaft

71785VSL - LH Steering Arm TAPER-LOK Upright Shaft

SKU: 71785VSL

$160.24

1 in stock

71785TLS - Taper-Lok Assembly (Set/2)

71785TLS - Taper-Lok Assembly (Set/2)

SKU: 71785TLS

$573.47

105 in stock

71785TLR - TAPER-LOK Spindle w/ RH Steering Arm

71785TLR - TAPER-LOK Spindle w/ RH Steering Arm

SKU: 71785TLR

$354.86

11 in stock

71785TLL - TAPER-LOK Spindle w/ LH Steering Arm

71785TLL - TAPER-LOK Spindle w/ LH Steering Arm

SKU: 71785TLL

$333.94

11 in stock

71785SPO - (1) TAPER-LOK Complete Spindle only
Out of Stock

71785SPO - (1) TAPER-LOK Complete Spindle only

SKU: 71785SPO

$272.24

Out of stock

71785SAR - (1) RH Steering Arm for TAPER-LOK Spindle

71785SAR - (1) RH Steering Arm for TAPER-LOK Spindle

SKU: 71785SAR

$108.15

39 in stock

71785SAL - (1) LH Steering Arm for TAPER-LOK Spindle

71785SAL - (1) LH Steering Arm for TAPER-LOK Spindle

SKU: 71785SAL

$113.90

161 in stock

71785HD - Steering (RH/LH) Spindle

71785HD - Steering (RH/LH) Spindle

SKU: 71785HD

$231.22

61 in stock

71785C92 - Spindle (RH/LH)

71785C92 - Spindle (RH/LH)

SKU: 71785C92

$232.11

101 in stock

63864C93 - Power Steering Cylinder

63864C93 - Power Steering Cylinder

SKU: 63864C93

$491.60

58 in stock