(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 3288 Tractor Parts

3288 parts and accessories

The Case IH 3288 tractor, manufactured from 1981 to 1984, was a popular choice for farmers needing a reliable utility tractor. Powered by an International Harvester D-358 diesel engine producing around 70 horsepower, the 3288 delivered dependable performance. Its robust PTO, rated at approximately 63 horsepower, made it well-suited for a variety of farming tasks.

The Case IH 3288 was introduced in 1981 as part of the International Harvester (later Case IH) 88 Series tractor lineup, succeeding earlier models and offering updated features. Production continued until 1984. The 3288 is equipped with an International Harvester D-358 5.9L (358 cu in) six-cylinder diesel engine, producing approximately 70 horsepower. The engine's displacement and diesel fuel system contributed to its fuel efficiency and durability. It features a gear-type transmission with options for either 8 forward and 4 reverse speeds, or 16 forward and 8 reverse speeds with the addition of a creeper gear. The PTO is rated at 63 horsepower, with a standard 540 RPM PTO speed. Hydraulic capacity is around 12 GPM, providing adequate power for implements. The 3-point hitch is a Category II, offering a lift capacity of approximately 3,800 lbs. The Case IH 3288 was commonly used for row crop work, hay baling, livestock feeding, and general tillage operations. Compared to smaller models in the 88 series, the 3288 provided more power and hydraulic capacity, while remaining more compact and maneuverable than larger row-crop tractors.

Specifications

EngineInternational Harvester D-358 70 HP Diesel
PTO HP63 HP @ 540 RPM
TransmissionGear Type, 8F/4R or 16F/8R (with creeper)
Hydraulics12 GPM, 2 remotes
3-Point HitchCategory II, 3800 lbs
Fuel Capacity28 gallons
Weight7,100 lbs
Years Produced1981-1984

Maintenance Tips

  • Engine Oil & Filter: Change the engine oil and filter every 250 hours of operation using high-quality diesel engine oil meeting API CF-4 or higher specifications.
  • Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours. Use only approved hydraulic fluid to prevent damage to the system.
  • Fuel System: Drain the fuel tank annually to remove water and sediment. Replace the fuel filter every 250 hours to ensure proper fuel flow and prevent injector issues.
  • Seasonal Storage: Before storing the tractor for the off-season, fill the fuel tank to prevent condensation, change the engine oil, and lubricate all grease fittings. Disconnect the battery and store it in a cool, dry place.

History & Background

The Case IH 3288 was introduced in 1981 as part of the International Harvester 88 Series tractors. These tractors aimed to offer improved operator comfort and updated styling compared to previous IH models. The 3288, along with other tractors in the 88 Series, played a significant role in transitioning International Harvester's tractor lineup before the Case acquisition.

Frequently Asked Questions

What engine is in the Case Ih 3288?

The Case IH 3288 is equipped with an International Harvester D-358, a 5.9L (358 cu in) six-cylinder diesel engine producing approximately 70 horsepower.

What is the PTO horsepower on a 3288?

The Case IH 3288 has a PTO horsepower rating of approximately 63 horsepower at 540 RPM.

What oil filter fits the 3288?

The Case IH 3288 typically uses a Fleetguard LF3349 or a Baldwin BD103 oil filter. Cross-references include Wix 51794 and NAPA 1794.

What are common parts needed for the 3288?

Common wear parts for the Case IH 3288 include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic cylinder seal kits, tie rod ends, clutch discs, and brake components.

Showing 313-336 of 357 products
358958R2 - Upright Spindle Bushing

358958R2 - Upright Spindle Bushing

SKU: 358958R2

$12.54

79 in stock

358958R1 - Spindle Bushing

358958R1 - Spindle Bushing

SKU: 358958R1

$12.54

79 in stock

185106C1 - Thrust Bearing

185106C1 - Thrust Bearing

SKU: 185106C1

$15.96

1052 in stock

15943DA - Felt Washer

15943DA - Felt Washer

SKU: 15943DA

$2.01

1008 in stock

148419C1 - Steering Arm (RH)

148419C1 - Steering Arm (RH)

SKU: 148419C1

$107.99

21 in stock

148418C1 - Steering Arm (LH)

148418C1 - Steering Arm (LH)

SKU: 148418C1

$105.93

9 in stock

1280566C2 - Power Steering Cylinder End
Out of Stock

1280566C2 - Power Steering Cylinder End

SKU: 1280566C2

$47.93

Out of stock

120732C2 - Axle Pivot Rear Pin

120732C2 - Axle Pivot Rear Pin

SKU: 120732C2

$54.96

49 in stock

104809C1 - Bushing

104809C1 - Bushing

SKU: 104809C1

$5.64

352 in stock

80130C1 - Fan Belt

80130C1 - Fan Belt

SKU: 80130C1

$13.52

32 in stock

532673R1 - Radiator (9 lb.) Cap

532673R1 - Radiator (9 lb.) Cap

SKU: 532673R1

$6.76

41 in stock

3132676R93 - Water w/ Gasket Pump

3132676R93 - Water w/ Gasket Pump

SKU: 3132676R93

$82.82

20 in stock

3132676R1 - Water pump w/ gasket

3132676R1 - Water pump w/ gasket

SKU: 3132676R1

$82.82

20 in stock

280210C2 - Compressor Drive Belt

SKU: 280210C2

$12.17

187 in stock

238-5013 - O-Ring

238-5013 - O-Ring

SKU: 238-5013

$2.57

134 in stock

146503C1 - Radiator
Out of Stock

146503C1 - Radiator

SKU: 146503C1

$1548.82

Out of stock

1252883C1 - Lower Radiator Hose

1252883C1 - Lower Radiator Hose

SKU: 1252883C1

$11.92

11 in stock

N159763 - PTO seals & O-ring greaseable release brg Seal Kit Incls: pilot brg

N159763 - PTO seals & O-ring greaseable release brg Seal Kit Incls: pilot brg

SKU: N159763

$61.14

54 in stock

N158563 - PTO seals & O-ring sealed release brg Seal Kit Incls: pilot brg

N158563 - PTO seals & O-ring sealed release brg Seal Kit Incls: pilot brg

SKU: N158563

$49.33

3 in stock

69789C91 - Release (sealed) Bearing

69789C91 - Release (sealed) Bearing

SKU: 69789C91

$26.25

643 in stock

524598R1 - Pilot Bearing

524598R1 - Pilot Bearing

SKU: 524598R1

$9.63

707 in stock

405300R92 - (w/ 1.406" flywheel step) adjust on bearing end W/ Hyd Clutch 3 lever Pressure Plate: 12"

405300R92 - (w/ 1.406" flywheel step) adjust on bearing end W/ Hyd Clutch 3 lever Pressure Plate: 12"

SKU: 405300R92

$496.88

29 in stock

405300-R - (w/ 1.406" flywheel step) use w/ Hyd. Clutch Re-mfg Pressure Plate: 12"

405300-R - (w/ 1.406" flywheel step) use w/ Hyd. Clutch Re-mfg Pressure Plate: 12"

SKU: 405300-R

$733.31

7 in stock

384395R94 - spring loaded 4-button Trans Disc: 12"

384395R94 - spring loaded 4-button Trans Disc: 12"

SKU: 384395R94

$216.28

21 in stock