(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 3288 Tractor Parts

3288 parts and accessories

The Case IH 3288 tractor, manufactured from 1981 to 1984, was a popular choice for farmers needing a reliable utility tractor. Powered by an International Harvester D-358 diesel engine producing around 70 horsepower, the 3288 delivered dependable performance. Its robust PTO, rated at approximately 63 horsepower, made it well-suited for a variety of farming tasks.

The Case IH 3288 was introduced in 1981 as part of the International Harvester (later Case IH) 88 Series tractor lineup, succeeding earlier models and offering updated features. Production continued until 1984. The 3288 is equipped with an International Harvester D-358 5.9L (358 cu in) six-cylinder diesel engine, producing approximately 70 horsepower. The engine's displacement and diesel fuel system contributed to its fuel efficiency and durability. It features a gear-type transmission with options for either 8 forward and 4 reverse speeds, or 16 forward and 8 reverse speeds with the addition of a creeper gear. The PTO is rated at 63 horsepower, with a standard 540 RPM PTO speed. Hydraulic capacity is around 12 GPM, providing adequate power for implements. The 3-point hitch is a Category II, offering a lift capacity of approximately 3,800 lbs. The Case IH 3288 was commonly used for row crop work, hay baling, livestock feeding, and general tillage operations. Compared to smaller models in the 88 series, the 3288 provided more power and hydraulic capacity, while remaining more compact and maneuverable than larger row-crop tractors.

Specifications

EngineInternational Harvester D-358 70 HP Diesel
PTO HP63 HP @ 540 RPM
TransmissionGear Type, 8F/4R or 16F/8R (with creeper)
Hydraulics12 GPM, 2 remotes
3-Point HitchCategory II, 3800 lbs
Fuel Capacity28 gallons
Weight7,100 lbs
Years Produced1981-1984

Maintenance Tips

  • Engine Oil & Filter: Change the engine oil and filter every 250 hours of operation using high-quality diesel engine oil meeting API CF-4 or higher specifications.
  • Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours. Use only approved hydraulic fluid to prevent damage to the system.
  • Fuel System: Drain the fuel tank annually to remove water and sediment. Replace the fuel filter every 250 hours to ensure proper fuel flow and prevent injector issues.
  • Seasonal Storage: Before storing the tractor for the off-season, fill the fuel tank to prevent condensation, change the engine oil, and lubricate all grease fittings. Disconnect the battery and store it in a cool, dry place.

History & Background

The Case IH 3288 was introduced in 1981 as part of the International Harvester 88 Series tractors. These tractors aimed to offer improved operator comfort and updated styling compared to previous IH models. The 3288, along with other tractors in the 88 Series, played a significant role in transitioning International Harvester's tractor lineup before the Case acquisition.

Frequently Asked Questions

What engine is in the Case Ih 3288?

The Case IH 3288 is equipped with an International Harvester D-358, a 5.9L (358 cu in) six-cylinder diesel engine producing approximately 70 horsepower.

What is the PTO horsepower on a 3288?

The Case IH 3288 has a PTO horsepower rating of approximately 63 horsepower at 540 RPM.

What oil filter fits the 3288?

The Case IH 3288 typically uses a Fleetguard LF3349 or a Baldwin BD103 oil filter. Cross-references include Wix 51794 and NAPA 1794.

What are common parts needed for the 3288?

Common wear parts for the Case IH 3288 include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic cylinder seal kits, tie rod ends, clutch discs, and brake components.

Showing 217-240 of 357 products
72877C1 - Leveling Screw Housing

72877C1 - Leveling Screw Housing

SKU: 72877C1

$220.42

42 in stock

527374R1 - Stabilizer; 1/2" X 2 1/4" Headed Pin

527374R1 - Stabilizer; 1/2" X 2 1/4" Headed Pin

SKU: 527374R1

$19.00

7 in stock

483858R1 - Hammerstrap Spacer

483858R1 - Hammerstrap Spacer

SKU: 483858R1

$7.82

30 in stock

406685R1 - Lower Pull Arm Front Pin

406685R1 - Lower Pull Arm Front Pin

SKU: 406685R1

$22.56

90 in stock

406244R2 - Front Yoke

406244R2 - Front Yoke

SKU: 406244R2

$56.39

73 in stock

406243R1 - Rear Yoke

406243R1 - Rear Yoke

SKU: 406243R1

$50.75

79 in stock

406242R2 - Complete Sway Limiter Assembly

406242R2 - Complete Sway Limiter Assembly

SKU: 406242R2

$87.26

69 in stock

404787R1 - Lynch Pin Shield

404787R1 - Lynch Pin Shield

SKU: 404787R1

$9.53

69 in stock

398373R1 - Telescoping Lift Arm Latch

398373R1 - Telescoping Lift Arm Latch

SKU: 398373R1

$29.32

253 in stock

398372R11 - Cat II Lower Pull Arm Link (RH)
Out of Stock

398372R11 - Cat II Lower Pull Arm Link (RH)

SKU: 398372R11

$76.18

Out of stock

398371R11 - Cat II Lower Pull Arm Link (LH)

398371R11 - Cat II Lower Pull Arm Link (LH)

SKU: 398371R11

$72.44

45 in stock

386198R1 - Stud

386198R1 - Stud

SKU: 386198R1

$37.88

7 in stock

384852R1 - Used In Front or Rear Yokes Pin

384852R1 - Used In Front or Rear Yokes Pin

SKU: 384852R1

$4.13

44 in stock

383363R11 - Lockout Pin

383363R11 - Lockout Pin

SKU: 383363R11

$15.64

20 in stock

382397R1 - Rear Stabilizer Eyebolt

382397R1 - Rear Stabilizer Eyebolt

SKU: 382397R1

$39.60

15 in stock

382390R1 - Front Stabilizer Eyebolt

382390R1 - Front Stabilizer Eyebolt

SKU: 382390R1

$37.68

30 in stock

382386R2 - Stabilizer Control Arm

382386R2 - Stabilizer Control Arm

SKU: 382386R2

$227.13

32 in stock

382210R11 - Center Link Pin (Tractor End) (Cat II)

382210R11 - Center Link Pin (Tractor End) (Cat II)

SKU: 382210R11

$22.68

177 in stock

382193R1 - Upper Latch Spring

382193R1 - Upper Latch Spring

SKU: 382193R1

$10.75

140 in stock

382192R1 - Lower Latch Spring

382192R1 - Lower Latch Spring

SKU: 382192R1

$11.63

191 in stock

149837C1 - Lower Adj. Screw

149837C1 - Lower Adj. Screw

SKU: 149837C1

$81.18

148 in stock

1331854C2 - Center Link Assembly (Cat III)
Out of Stock

1331854C2 - Center Link Assembly (Cat III)

SKU: 1331854C2

$242.07

Out of stock

1272681C1 - Front Lower Link Ball Bushing

1272681C1 - Front Lower Link Ball Bushing

SKU: 1272681C1

$47.64

95 in stock

108592C2 - Center Link Handle

108592C2 - Center Link Handle

SKU: 108592C2

$21.51

19 in stock