Case IH 1466 Tractor Parts
1466 parts and accessories
The Case IH 1466 tractor, manufactured from 1971 to 1976, was a powerhouse on the farm. Equipped with an International Harvester DT-414 diesel engine producing approximately 145 horsepower, and boasting a PTO horsepower around 122, the 1466 became a favorite for its reliability and ability to handle demanding tasks. Its robust design and powerful engine made it a workhorse for row crop farming and tillage operations.
The Case IH 1466 tractor was part of the International Harvester's '66 series, introduced in 1971, and continued production until 1976. These tractors were designed to provide farmers with more power and improved features compared to previous models. The 1466 is powered by an International Harvester DT-414 cubic inch, 6-cylinder diesel engine, delivering approximately 145 engine horsepower. Its PTO horsepower is rated around 122. This model typically features a gear-drive transmission offering 8 forward and 4 reverse speeds, providing a suitable range for various field operations. The 1466's PTO is available in both 540 and 1000 RPM configurations. The hydraulic system has a capacity of approximately 15 GPM, powering two or three remote hydraulic valves for implements. It is equipped with a Category II 3-point hitch system. The 1466 excels in row crop operations, hay baling, livestock feeding, and various tillage applications like plowing and discing. Compared to the smaller 1066 or larger 1566, the 1466 struck a balance between power and maneuverability, making it a versatile choice for many farms.
Specifications
| Engine | International Harvester DT-414 145 HP Diesel |
|---|---|
| PTO HP | 122 HP @ 1000 RPM |
| Transmission | Gear Drive 8F/4R |
| Hydraulics | 15 GPM, 2-3 remotes |
| 3-Point Hitch | Category II, 5700 lbs lift capacity |
| Fuel Capacity | 45 gallons |
| Weight | 13,605 lbs |
| Years Produced | 1971-1976 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 100-125 hours of operation using high-quality diesel engine oil that meets the specifications outlined in your operator's manual. Regularly inspect the oil level and condition.
- Hydraulic System Maintenance: Check hydraulic fluid levels regularly and change the hydraulic filter according to the manufacturer's recommendations (typically every 500 hours). Use the correct type of hydraulic fluid to prevent damage to seals and components.
- Fuel System Care: Use clean, high-quality diesel fuel and replace fuel filters as recommended to prevent fuel system clogging. Drain any water that accumulates in the fuel/water separator regularly.
- Seasonal Storage: Before storing the tractor for an extended period, stabilize the fuel with a fuel stabilizer to prevent fuel degradation. Disconnect the battery and store it in a cool, dry place. Lubricate all grease fittings and cover the tractor to protect it from the elements.
History & Background
Introduced in 1971, the Case IH (International Harvester at the time) 1466 represented a significant advancement in tractor technology for its era. While there were no major redesigns during its production run, the 1466 remains a significant model in agricultural history, remembered for its power and reliability in the field, contributing greatly to increased farming efficiency.
Frequently Asked Questions
What engine is in the Case Ih 1466?
The Case IH 1466 is equipped with an International Harvester DT-414, a 414 cubic inch, 6-cylinder diesel engine producing approximately 145 horsepower.
What is the PTO horsepower on a 1466?
The PTO horsepower on a Case IH 1466 is rated at approximately 122 horsepower, with both 540 and 1000 RPM options available.
What oil filter fits the 1466?
The Case IH 1466 typically uses a Fram PH5 or equivalent oil filter. Common cross-references include Wix 51794 and NAPA 1794. Always verify fitment with your parts supplier.
What are common parts needed for the 1466?
Common wear parts for the Case IH 1466 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic seals, tie rod ends, steering components, and clutch disc/pressure plate components.
38B587 - Brake Disc Seal Kit
SKU: 38B587
1225 in stock

385757R3 - Reverse Drive Cover Gasket
SKU: 385757R3
236 in stock

384431R2 - TA Hyd. Clutch Driving Plate
SKU: 384431R2
9 in stock

384430R2 - TA Hyd. Clutch Piston Backing Plate
SKU: 384430R2
6 in stock

384368R12 - Brake Piston Assembly
SKU: 384368R12
6 in stock

384307R1 - Transmission Brake Operating (Special Spring Loaded) Rod
SKU: 384307R1
34 in stock

384248R1 - Clutch Operating Rod Turnbuckle
SKU: 384248R1
20 in stock

384091R3 - Constant Mesh Gear Spacer
SKU: 384091R3
9 in stock

383997R1 - IS SPRING
SKU: 383997R1
117 in stock

382638R2 - Bushing
SKU: 382638R2
21 in stock

382492R2 - Clutch Rod Pin
SKU: 382492R2
107 in stock

382349R1 - Constant Mesh Torque Amplifier Quill Gear
SKU: 382349R1
19 in stock

380319R1 - Pump Drive (Hitch) Gear
SKU: 380319R1
3 in stock

380315R2 - Range Cover Gasket
SKU: 380315R2
226 in stock

380178R11 - Clutch Operating; Rear Rod
SKU: 380178R11
21 in stock

380126R2 - Countershaft Gears Spacer
SKU: 380126R2
23 in stock

380117R1 - Cam Retaining Coupling
SKU: 380117R1
113 in stock

380116R3 - Cam Pivot Shaft
SKU: 380116R3
34 in stock

380115R2 - Detent Roller
SKU: 380115R2
171 in stock
380115R1 - Ref 8 - Detent roller
SKU: 380115R1
171 in stock

380112R2 - Transmission Speed Cover Gasket
SKU: 380112R2
23 in stock

380110R1 - Clutch Release Fork
SKU: 380110R1
20 in stock

223312 - Wedge Bolt
SKU: 223312
357 in stock

1981317C1 - Transmission Brake Lever Assembly
SKU: 1981317C1
84 in stock
