Case IH 1466 Tractor Parts
1466 parts and accessories
The Case IH 1466 tractor, manufactured from 1971 to 1976, was a powerhouse on the farm. Equipped with an International Harvester DT-414 diesel engine producing approximately 145 horsepower, and boasting a PTO horsepower around 122, the 1466 became a favorite for its reliability and ability to handle demanding tasks. Its robust design and powerful engine made it a workhorse for row crop farming and tillage operations.
The Case IH 1466 tractor was part of the International Harvester's '66 series, introduced in 1971, and continued production until 1976. These tractors were designed to provide farmers with more power and improved features compared to previous models. The 1466 is powered by an International Harvester DT-414 cubic inch, 6-cylinder diesel engine, delivering approximately 145 engine horsepower. Its PTO horsepower is rated around 122. This model typically features a gear-drive transmission offering 8 forward and 4 reverse speeds, providing a suitable range for various field operations. The 1466's PTO is available in both 540 and 1000 RPM configurations. The hydraulic system has a capacity of approximately 15 GPM, powering two or three remote hydraulic valves for implements. It is equipped with a Category II 3-point hitch system. The 1466 excels in row crop operations, hay baling, livestock feeding, and various tillage applications like plowing and discing. Compared to the smaller 1066 or larger 1566, the 1466 struck a balance between power and maneuverability, making it a versatile choice for many farms.
Specifications
| Engine | International Harvester DT-414 145 HP Diesel |
|---|---|
| PTO HP | 122 HP @ 1000 RPM |
| Transmission | Gear Drive 8F/4R |
| Hydraulics | 15 GPM, 2-3 remotes |
| 3-Point Hitch | Category II, 5700 lbs lift capacity |
| Fuel Capacity | 45 gallons |
| Weight | 13,605 lbs |
| Years Produced | 1971-1976 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 100-125 hours of operation using high-quality diesel engine oil that meets the specifications outlined in your operator's manual. Regularly inspect the oil level and condition.
- Hydraulic System Maintenance: Check hydraulic fluid levels regularly and change the hydraulic filter according to the manufacturer's recommendations (typically every 500 hours). Use the correct type of hydraulic fluid to prevent damage to seals and components.
- Fuel System Care: Use clean, high-quality diesel fuel and replace fuel filters as recommended to prevent fuel system clogging. Drain any water that accumulates in the fuel/water separator regularly.
- Seasonal Storage: Before storing the tractor for an extended period, stabilize the fuel with a fuel stabilizer to prevent fuel degradation. Disconnect the battery and store it in a cool, dry place. Lubricate all grease fittings and cover the tractor to protect it from the elements.
History & Background
Introduced in 1971, the Case IH (International Harvester at the time) 1466 represented a significant advancement in tractor technology for its era. While there were no major redesigns during its production run, the 1466 remains a significant model in agricultural history, remembered for its power and reliability in the field, contributing greatly to increased farming efficiency.
Frequently Asked Questions
What engine is in the Case Ih 1466?
The Case IH 1466 is equipped with an International Harvester DT-414, a 414 cubic inch, 6-cylinder diesel engine producing approximately 145 horsepower.
What is the PTO horsepower on a 1466?
The PTO horsepower on a Case IH 1466 is rated at approximately 122 horsepower, with both 540 and 1000 RPM options available.
What oil filter fits the 1466?
The Case IH 1466 typically uses a Fram PH5 or equivalent oil filter. Common cross-references include Wix 51794 and NAPA 1794. Always verify fitment with your parts supplier.
What are common parts needed for the 1466?
Common wear parts for the Case IH 1466 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic seals, tie rod ends, steering components, and clutch disc/pressure plate components.

534546R6 - MUFFLER
SKU: 534546R6
57 in stock

M300 - Pad & Screw For1981317C1 Brake Arm
SKU: M300
31 in stock

IH6688KIT - spring rollers arms Kit: 71526KIT
SKU: IH6688KIT
13 in stock

IH5686KIT - Complete Repair Kit
SKU: IH5686KIT
14 in stock

IH5666KIT - Shift Linkage Kit
SKU: IH5666KIT
69 in stock

830443 - Shift Detent w/ Rivets (Transmission Speed Cover) Plate
SKU: 830443
11 in stock

79020-7 - Torque Amplifier Gasket Set
SKU: 79020-7
53 in stock

71526C1 - Shaft w/ duckfoot
SKU: 71526C1
38 in stock

66487C1 - Brake Disc Seal Kit
SKU: 66487C1
1225 in stock

625743C1 - Cup; Rear Axle Hub Bearing
SKU: 625743C1
177 in stock

57119C1 - Clutch Booster Rubber Boot
SKU: 57119C1
2308 in stock

537120R1 - Primary Brake (LH) Plate Stop
SKU: 537120R1
14 in stock

537119R1 - Primary Brake (RH) Plate Stop
SKU: 537119R1
23 in stock

530807R2 - Brake Piston Outer O-Ring
SKU: 530807R2
12 in stock

530806R91 - Outer Brake Shaft Seal
SKU: 530806R91
62 in stock

529490R1 - Reverse Shift Lever
SKU: 529490R1
73 in stock

529489R1 - Range Shift Lever
SKU: 529489R1
21 in stock

529434R2 - Transmission Shaft
SKU: 529434R2
26 in stock

529282R2 - Transmission Main Shaft
SKU: 529282R2
Out of stock

528709R2 - Bull Pinion Shaft
SKU: 528709R2
14 in stock

528707R1 - Ring & Pinion Set
SKU: 528707R1
71 in stock

528675R1 - 3rd/ 4th Speed Sliding Gear
SKU: 528675R1
22 in stock

527900R1 - Neutral Lock Plate
SKU: 527900R1
65 in stock

50191001 - Clutch Release Bearing Return Kit
SKU: 50191001
37 in stock
