Case IH 1466 Tractor Parts
1466 parts and accessories
The Case IH 1466 tractor, manufactured from 1971 to 1976, was a powerhouse on the farm. Equipped with an International Harvester DT-414 diesel engine producing approximately 145 horsepower, and boasting a PTO horsepower around 122, the 1466 became a favorite for its reliability and ability to handle demanding tasks. Its robust design and powerful engine made it a workhorse for row crop farming and tillage operations.
The Case IH 1466 tractor was part of the International Harvester's '66 series, introduced in 1971, and continued production until 1976. These tractors were designed to provide farmers with more power and improved features compared to previous models. The 1466 is powered by an International Harvester DT-414 cubic inch, 6-cylinder diesel engine, delivering approximately 145 engine horsepower. Its PTO horsepower is rated around 122. This model typically features a gear-drive transmission offering 8 forward and 4 reverse speeds, providing a suitable range for various field operations. The 1466's PTO is available in both 540 and 1000 RPM configurations. The hydraulic system has a capacity of approximately 15 GPM, powering two or three remote hydraulic valves for implements. It is equipped with a Category II 3-point hitch system. The 1466 excels in row crop operations, hay baling, livestock feeding, and various tillage applications like plowing and discing. Compared to the smaller 1066 or larger 1566, the 1466 struck a balance between power and maneuverability, making it a versatile choice for many farms.
Specifications
| Engine | International Harvester DT-414 145 HP Diesel |
|---|---|
| PTO HP | 122 HP @ 1000 RPM |
| Transmission | Gear Drive 8F/4R |
| Hydraulics | 15 GPM, 2-3 remotes |
| 3-Point Hitch | Category II, 5700 lbs lift capacity |
| Fuel Capacity | 45 gallons |
| Weight | 13,605 lbs |
| Years Produced | 1971-1976 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 100-125 hours of operation using high-quality diesel engine oil that meets the specifications outlined in your operator's manual. Regularly inspect the oil level and condition.
- Hydraulic System Maintenance: Check hydraulic fluid levels regularly and change the hydraulic filter according to the manufacturer's recommendations (typically every 500 hours). Use the correct type of hydraulic fluid to prevent damage to seals and components.
- Fuel System Care: Use clean, high-quality diesel fuel and replace fuel filters as recommended to prevent fuel system clogging. Drain any water that accumulates in the fuel/water separator regularly.
- Seasonal Storage: Before storing the tractor for an extended period, stabilize the fuel with a fuel stabilizer to prevent fuel degradation. Disconnect the battery and store it in a cool, dry place. Lubricate all grease fittings and cover the tractor to protect it from the elements.
History & Background
Introduced in 1971, the Case IH (International Harvester at the time) 1466 represented a significant advancement in tractor technology for its era. While there were no major redesigns during its production run, the 1466 remains a significant model in agricultural history, remembered for its power and reliability in the field, contributing greatly to increased farming efficiency.
Frequently Asked Questions
What engine is in the Case Ih 1466?
The Case IH 1466 is equipped with an International Harvester DT-414, a 414 cubic inch, 6-cylinder diesel engine producing approximately 145 horsepower.
What is the PTO horsepower on a 1466?
The PTO horsepower on a Case IH 1466 is rated at approximately 122 horsepower, with both 540 and 1000 RPM options available.
What oil filter fits the 1466?
The Case IH 1466 typically uses a Fram PH5 or equivalent oil filter. Common cross-references include Wix 51794 and NAPA 1794. Always verify fitment with your parts supplier.
What are common parts needed for the 1466?
Common wear parts for the Case IH 1466 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic seals, tie rod ends, steering components, and clutch disc/pressure plate components.

44R218 - O-Rings
SKU: 44R218
130 in stock

406473R1 - 1st Gear
SKU: 406473R1
8 in stock

406028R1 - Constant Mesh Gear
SKU: 406028R1
8 in stock

404855R1 - Shift Linkage Sleeve
SKU: 404855R1
222 in stock
401142R1 - Torque Amplifier Valve Operating Lever
SKU: 401142R1
229 in stock
398304R1 - SPRING
SKU: 398304R1
62 in stock

398300KIT - 1- 398304R1 Spring 2- 380115R2 Rollers Kit: 2 Arms
SKU: 398300KIT
30 in stock

398297R1 - Reverse Shift Lower Shaft
SKU: 398297R1
Out of stock

398294R1 - Sector Reverse (Ref.# 4) Detent
SKU: 398294R1
42 in stock

398291R2 - Shaft & Lever
SKU: 398291R2
13 in stock

398285R2 - Hi/Lo Operating Arm Assembly
SKU: 398285R2
7 in stock

398285KIT - Lever & Splined Arm Kit
SKU: 398285KIT
8 in stock

398281R3 - Upper Shaft
SKU: 398281R3
55 in stock

398279R2 - Hi-Lo Shift Fork
SKU: 398279R2
205 in stock

398274R1 - Transmission Cross Shaft Bushing
SKU: 398274R1
81 in stock

398173R1 - Hi-Lo Selective Drive Shaft
SKU: 398173R1
36 in stock

397987R1 - Transmission Shift Pivot Arm Collar
SKU: 397987R1
243 in stock

397986R1 - Transmission Shift Shoulder Bolt
SKU: 397986R1
137 in stock

395249R1 - Clutch Pedal Pivot Shaft
SKU: 395249R1
51 in stock

393525R2 - Reverse Drive Gear
SKU: 393525R2
30 in stock

393523R1 - Reverse Idler Gear
SKU: 393523R1
8 in stock

393354R91 - Link Assembly
SKU: 393354R91
325 in stock

390856YKIT - Park Lock (Yoke End) Kit
SKU: 390856YKIT
20 in stock

390856KIT - Park Lock Linkage Kit
SKU: 390856KIT
216 in stock
