Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

International Harvester Carburetor: Cub, 140 & 340

Is your International Harvester Cub, 140, or 340 tractor running rough? This guide covers common carburetor issues, troubleshooting tips, and where to find the parts you need to get your tractor running smoothly again.

Introduction to International Harvester Carburetors

The carburetor is a crucial component in many older International Harvester (IH) tractors, including popular models like the Cub, 140, and 340. It’s responsible for mixing air and fuel in the correct proportions to create a combustible mixture for the engine. A properly functioning carburetor ensures smooth operation, optimal fuel efficiency, and reliable performance. Like the Farmall carburetor, these IH carbs require occasional maintenance and, sometimes, complete rebuilds.

Recommended Parts for This Guide

7 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

Madison Tractor carries a wide selection of parts for International Harvester and Case IH tractors. We understand the importance of keeping your equipment running, and we're here to help you find the right parts, whether it's a complete carburetor, rebuild kit, or individual components. We stock parts for many other brands as well, including John Deere, Ford, Massey Ferguson, and more.

Common Carburetor Problems in IH Tractors

Several common issues can arise with International Harvester carburetors. Recognizing these problems early can save you time and money on repairs:

  • Hard Starting: A carburetor that's not delivering the correct fuel-air mixture can make the tractor difficult to start, especially in cold weather.
  • Rough Idle: An erratic or unstable idle often indicates a clogged carburetor or an air leak.
  • Stalling: If the engine stalls frequently, particularly under load, the carburetor may be starving the engine of fuel.
  • Poor Fuel Economy: A malfunctioning carburetor can lead to excessive fuel consumption.
  • Black Smoke: This indicates that the engine is running too rich (too much fuel).
  • White Smoke: This *can* indicate a lean condition, but is more likely coolant entering the combustion chamber (blown head gasket).
  • Lack of Power: If the tractor lacks its usual power, the carburetor could be the culprit.
  • Fuel Leaks: Leaks around the carburetor are a fire hazard and should be addressed immediately.

Troubleshooting Your International Harvester Carburetor

Before replacing your carburetor, try these troubleshooting steps. Safety First! Always work in a well-ventilated area and disconnect the battery's negative terminal before working on the fuel system.

  1. Visual Inspection: Carefully inspect the carburetor for any obvious signs of damage, leaks, or loose connections.
  2. Check the Fuel Supply: Ensure that fuel is flowing freely from the fuel tank to the carburetor. Inspect the fuel lines for kinks or obstructions. A faulty tractor fuel pump may be the cause. Consider replacing the fuel filter (often a sediment bowl type on older IH tractors) or the elbow and strainer.
  3. Clean the Carburetor: A clogged carburetor is a common problem. Use carburetor cleaner to thoroughly clean the jets, passages, and venturi. Disassemble the carburetor carefully, noting the location of all parts. (See the Rebuild section below)
  4. Check for Air Leaks: Air leaks can disrupt the fuel-air mixture. Check the carburetor mounting flange and intake manifold for leaks. You can use a can of starting fluid or carburetor cleaner to spray around the joints while the engine is running. If the engine speed changes, you've found a leak.
  5. Adjust the Idle Mixture: The idle mixture screw controls the richness of the fuel-air mixture at idle. Adjust this screw until the engine idles smoothly. Refer to your tractor's service manual for the correct adjustment procedure.
  6. Inspect the Float: The float controls the fuel level in the carburetor bowl. If the float is damaged or improperly adjusted, it can cause fuel starvation or flooding.

Carburetor Rebuild: A Step-by-Step Guide

If cleaning and adjustments don't solve the problem, a carburetor rebuild may be necessary. Madison Tractor offers rebuild kits for many International Harvester carburetors.

Tools and Materials Needed:

  • Carburetor rebuild kit (correct for your specific IH tractor model)
  • Carburetor cleaner
  • Small screwdrivers
  • Pliers
  • Wrench set
  • Gasket scraper
  • Compressed air
  • Clean work surface
  • Service manual (highly recommended)

Rebuild Steps:

  1. Disassembly: Carefully disassemble the carburetor, taking pictures or making notes to ensure you can reassemble it correctly. Remove all gaskets, O-rings, and other rubber parts.
  2. Cleaning: Thoroughly clean all metal parts with carburetor cleaner. Use compressed air to blow out any passages or jets. Pay close attention to the idle and main jets, making sure they are clear.
  3. Inspection: Inspect all parts for wear or damage. Replace any worn or damaged parts with new ones from the rebuild kit.
  4. Reassembly: Reassemble the carburetor using the new gaskets and O-rings from the rebuild kit. Refer to your notes or the service manual to ensure proper assembly.
  5. Adjustment: After reassembly, adjust the float level and idle mixture according to the specifications in your tractor's service manual.
  6. Installation: Install the rebuilt carburetor on the tractor and reconnect the fuel lines and throttle linkage.

Torque Specifications:

Carburetor mounting bolts should be tightened to the torque specifications listed in your service manual. A typical range is 15-20 ft-lbs, but consult your manual for precise values. Improper torque can cause air leaks.

Specific IH Models: Cub, 140, and 340

International Harvester Cub

The IH Cub often used a small, simple carburetor. Common OEM part numbers to investigate are 251294R91 or similar. These carburetors are relatively easy to rebuild. Pay close attention to the condition of the throttle shaft bushings, as wear here can cause air leaks.

International Harvester 140

The IH 140, similar to the Cub, required a reliable fuel delivery system. Carburetors for the 140 may have slight differences depending on the year. Check your tractor's serial number to confirm the correct parts.

International Harvester 340

The IH 340, being a larger tractor, used a slightly more complex carburetor than the Cub or 140. Ensure the float level is correctly set after a rebuild. Investigate part numbers like 364576R91. This model, along with others in the IH range, also required attention to the fuel pump to provide adequate fuel pressure to the carburetor.

Finding the Right Parts at Madison Tractor

At Madison Tractor, we understand the challenges of maintaining vintage tractors. We carry a comprehensive selection of parts for International Harvester, Case IH, and other major brands like John Deere, Ford, New Holland, Massey Ferguson, Kubota, Allis Chalmers, and more. Whether you need a complete carburetor, a rebuild kit, or individual components like jets, floats, or gaskets, we have you covered.

Besides carburetor parts, we also stock a wide variety of other tractor parts, including radiators, water pumps, starters, alternators, hydraulic pumps, clutch kits, PTO parts, injectors, filters, gaskets, pistons, and more.

Conclusion

Maintaining your International Harvester carburetor is essential for keeping your tractor running smoothly and efficiently. By understanding the common problems, following the troubleshooting steps outlined in this guide, and using quality parts from Madison Tractor, you can keep your IH Cub, 140, or 340 tractor in top condition for years to come. Remember to consult your tractor's service manual for specific instructions and torque specifications.

Shop Madison Tractor today for all your International Harvester carburetor needs. We are committed to providing you with the best parts, prices, and customer service in the industry.

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →