Murray Snow Blower Belt: Auger & Drive Belt Sizes
Replacing a worn or broken Murray snow blower belt is crucial for optimal performance. This guide provides essential information on finding the correct auger and drive belt sizes for your model, along with tips for installation and maintenance.
Introduction to Murray Snow Blower Belts
A reliable snow blower is essential for clearing driveways and walkways during winter. Murray snow blowers, known for their affordability and ease of use, rely on belts to transfer power from the engine to the auger (which breaks up the snow) and the drive system (which moves the snow blower forward). Over time, these belts can wear out, stretch, or break, leading to reduced performance or complete failure. Replacing your murray snow blower belt promptly ensures your machine operates efficiently throughout the winter season.
Recommended Parts for This Guide
8 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
At Madison Tractor, we understand the importance of having the right replacement parts when you need them. We stock a wide variety of snow blower parts including belts, blades, spindles, pulleys, filters, spark plugs, bearings, and snow blower shear pins. We carry parts for brands like John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, and Dixie Chopper.
This guide will help you identify the correct murray snow blower belt size for your machine and provide helpful tips for installation and maintenance.
Identifying the Correct Belt Size
Finding the right murray snow blower belt is crucial. Using the wrong size can lead to slippage, premature wear, and even damage to your snow blower. Here's how to ensure you get the correct replacement:
1. Locate Your Model Number
The first step is to find your Murray snow blower's model number. This number is typically located on a sticker or plate attached to the machine's frame. Common locations include:
- On the rear of the snow blower housing
- On the side of the engine
- Underneath the control panel
Once you find the model number, write it down. This will be your key to finding the correct belt size.
2. Consult Your Owner's Manual
Your owner's manual is the best resource for finding the correct belt sizes. Look for a section on replacement parts or a parts diagram. The manual should list the specific belt part numbers required for your model. If you've misplaced your manual, you can often find a digital copy on the manufacturer's website.
3. Use Online Parts Lookups
Many online parts retailers, including Madison Tractor, offer parts lookup tools. Enter your Murray snow blower's model number, and the system will display a list of compatible parts, including auger and drive belts.
4. Measure the Old Belt (If Available)
If your old belt is still intact (even if broken), you can measure its length and width to help identify a suitable replacement. Use a flexible measuring tape to measure the outside circumference of the belt. Note the width and thickness of the belt as well.
Important Note: Belt sizes are typically listed in inches. Common belt sizes for Murray snow blowers range from 3/8" to 1/2" in width and 30" to 50" in length, but these are just examples. For instance, you might need a 1/2" X 41" Aramid Blue V-Belt or a 1/2" X 33" Aramid Blue V-Belt. Always confirm the correct size for your specific model.
Murray Snow Blower auger belt
The auger belt is responsible for driving the auger, which is the rotating component that gathers and breaks up the snow. A worn or broken auger belt will prevent the auger from spinning, rendering your snow blower useless. Here are key things to remember about your auger belt:
- Function: Powers the auger to collect and break up snow.
- Symptoms of Wear: Slippage, reduced snow throwing distance, squealing noises.
- Common Issues: Cracking, fraying, stretching, complete breakage.
To ensure optimal performance, replace your auger belt at the first sign of wear.
Murray Snow Blower drive belt
The drive belt powers the wheels of your snow blower, allowing it to move forward and backward. A faulty drive belt will make it difficult or impossible to maneuver your machine. Key points regarding the drive belt:
- Function: Transfers power to the wheels, enabling movement.
- Symptoms of Wear: Reduced traction, slow or erratic movement, inability to climb hills.
- Common Issues: Slippage, stretching, cracking, complete breakage.
Maintaining a healthy drive belt is essential for efficient snow removal.
Replacing Your Murray Snow Blower Belt
Replacing a murray snow blower belt is a relatively straightforward process, but it's essential to follow these steps carefully. Always consult your owner's manual for specific instructions for your model. Here's a general guide:
- Safety First: Disconnect the spark plug wire to prevent accidental starting.
- Remove the Belt Cover: Locate and remove the belt cover(s). This usually involves unscrewing a few bolts or clips.
- Release Belt Tension: Most Murray snow blowers have a tensioner pulley that needs to be released to remove the old belt. Consult your manual for the specific location and mechanism.
- Remove the Old Belt: Carefully remove the old belt from the pulleys.
- Install the New Belt: Route the new belt around the pulleys, ensuring it's properly seated in the grooves.
- Adjust Belt Tension: Re-engage the tensioner pulley and adjust it according to your manual's instructions. The belt should be snug but not overly tight.
- Reinstall the Belt Cover: Replace the belt cover and secure it with the screws or clips.
- Reconnect the Spark Plug Wire: Reconnect the spark plug wire.
- Test the Snow Blower: Start the snow blower and test the auger and drive system to ensure they are working correctly.
Safety Warning: Always wear gloves when working on your snow blower. Be careful when working around moving parts. If you're not comfortable performing this repair yourself, consider taking your snow blower to a qualified service technician.
While you're replacing your belt, it's a good time to inspect other components like the shear pins, skid shoes, and scraper blade. Replacing worn parts can improve your snow blower's performance and prevent future breakdowns. See our articles on Ariens snowblower parts, Craftsman snowblower parts, and Toro snow blower parts to learn more about parts for other popular brands.
Maintaining Your Snow Blower Belts
Proper maintenance can extend the life of your snow blower belts and prevent unexpected breakdowns. Here are some tips:
- Regular Inspections: Check your belts regularly for signs of wear, such as cracks, fraying, or stretching.
- Proper Storage: Store your snow blower in a dry place to prevent belt deterioration.
- Avoid Overloading: Don't try to clear snow that's too deep or heavy, as this can put excessive strain on the belts.
- Adjust Belt Tension: Periodically check and adjust the belt tension to ensure proper engagement.
- Use OEM or High-Quality Aftermarket Belts: When replacing belts, choose OEM (Original Equipment Manufacturer) or high-quality aftermarket belts from reputable brands. These belts are designed to withstand the demanding conditions of snow removal.
Shop for Your Murray Snow Blower Belt at Madison Tractor
Ready to replace your murray snow blower belt? Madison Tractor Company has you covered! We offer a wide selection of belts, along with other snow blower parts, to keep your machine running smoothly all winter long. Visit our website today to browse our inventory and find the parts you need. Our knowledgeable staff is always available to answer your questions and help you find the right parts for your specific Murray snow blower model. Check out our selection of snow blower belts. You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Snow Blower Parts Guide: Find Replacement Parts by Brand & Model















