Massey Ferguson 860 Combine Parts

Jump to Parts

The Massey Ferguson 860 combine, produced from the mid-1970s to the early 1980s, was a popular choice for farmers seeking a reliable and efficient grain harvesting solution. Powered by a robust diesel engine offering around 155-175 HP, the 860 handled various crops with ease, especially wheat, soybeans, and corn. Available with header widths up to 20 feet, its conventional separator system provided a good balance of threshing performance and grain quality.

The Massey Ferguson 860 combine was introduced in the mid-1970s as a workhorse in the MF combine lineup, continuing production into the early 1980s. It featured a Perkins or Caterpillar diesel engine, typically producing between 155 and 175 horsepower, with a displacement around 540 cubic inches (8.8 liters). The 860 utilized a conventional threshing system with a wide cylinder and walkers for grain separation. Grain tank capacity was around 150 bushels, and the unloading auger could unload at a rate of approximately 40-50 bushels per minute. Available header widths ranged from 13 to 20 feet, catering to different field sizes and crop conditions. While chopper and spreader options were offered, these could vary based on year and dealer modifications. The operator's cab was relatively basic, focusing on functional controls and visibility. The Massey Ferguson 860 excelled at harvesting small grains like wheat and barley, as well as soybeans and corn in some regions.

Specifications

Engine	Perkins/Caterpillar 155-175 HP 540 cu in Diesel
Separator Type	Conventional - Cylinder with walker separation
Grain Tank	150 bushels
Unloading Rate	40-50 bu/min
Header Widths	13-20 ft
Fuel Capacity	65 gallons
Weight	Approx. 15,000 lbs
Years Produced	Mid 1970s - Early 1980s

Maintenance Tips

Concave Adjustment: Regularly inspect and adjust concave clearance based on crop type and moisture content to optimize threshing performance and minimize grain damage.
Belt and Chain Tension: Check and maintain proper tension on all drive belts and chains to prevent slippage, premature wear, and potential breakdowns during harvest.
Sieve and Chaffer Cleaning: Clean sieves and chaffers regularly to remove debris and ensure proper airflow for efficient grain cleaning and separation.
Bearing Greasing: Grease all bearings according to the manufacturer's recommended schedule to prevent premature failure and maintain smooth operation of moving parts. Pay special attention to header bearings.

History & Background

The Massey Ferguson 860 was a key model in the company's combine lineup during its production run. While it didn't receive major redesigns during its lifecycle, minor improvements and refinements were implemented over the years. It represented a reliable and affordable option for farmers seeking a dependable conventional combine harvester.

Frequently Asked Questions

What engine is in the Massey Ferguson 860?

The Massey Ferguson 860 typically uses a Perkins or Caterpillar diesel engine, producing between 155 and 175 horsepower with a displacement of approximately 540 cubic inches (8.8 liters).

What is the grain tank capacity on a 860?

The grain tank capacity on a Massey Ferguson 860 is approximately 150 bushels, with an unloading rate of around 40-50 bushels per minute.

What type of separator does the 860 have?

The Massey Ferguson 860 features a conventional threshing system. This includes a wide cylinder to knock the grain from the head, and then straw walkers which oscillate to separate the grain from the chaff.

What are common parts needed for the 860?

Common wear parts for the Massey Ferguson 860 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections. Regular inspection and replacement of these parts are essential for optimal performance.

Showing 121-144 of 209 products

Sort by: