John Deere 8630 Tractor Parts
8630 parts and accessories
The John Deere 8630, manufactured from 1978 to 1981, was a powerful and innovative agricultural tractor. Featuring a robust 270 horsepower diesel engine, this tractor delivered significant PTO horsepower. Its articulated design and advanced features made it a popular choice for farmers tackling demanding tasks in large-scale operations.
The John Deere 8630 was introduced in 1978 as part of the company's line of high-horsepower, four-wheel drive articulated tractors. Production continued until 1981. This model was powered by a John Deere 466 cu in (7.6 L) 6-cylinder turbocharged diesel engine producing approximately 270 horsepower. It had a powershift transmission offering 8 forward and 4 reverse speeds. The PTO horsepower was rated at around 225 HP, and offered a 1000 RPM PTO speed. The hydraulic system had a capacity of around 30 GPM, supplying power for implement operation, typically with two to three remote valves. The 3-point hitch was a Category III, capable of lifting substantial implements. This tractor was commonly used for row crop farming, tillage operations, and large-scale hay production. It was distinguished by its articulated steering, which provided excellent maneuverability compared to traditional front-wheel assist tractors. The 8630 represented a significant advancement in tractor technology at the time, offering farmers increased power and efficiency.
Specifications
| Engine | John Deere 466 cu in (7.6 L) 270 HP Diesel |
|---|---|
| PTO HP | 225 HP @ 1000 RPM |
| Transmission | Powershift 8 forward/4 reverse |
| Hydraulics | 30 GPM, 2-3 remotes |
| 3-Point Hitch | Category III, 7,900 lbs lift capacity |
| Fuel Capacity | 136 gallons |
| Weight | 24,000 lbs |
| Years Produced | 1978-1981 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 250 hours of operation, using a high-quality oil that meets John Deere specifications.
- Hydraulic System: Regularly inspect hydraulic fluid levels and filter condition. Change hydraulic fluid and filter every 500-1000 hours, depending on operating conditions, to prevent contamination and maintain performance.
- Fuel System: Use clean, high-quality diesel fuel. Inspect and replace fuel filters regularly (every 250 hours) to prevent fuel system issues. Drain water from the fuel tank regularly to avoid corrosion and injector problems.
- Seasonal Storage: Before storing the tractor for the off-season, drain and refill the fuel tank with fresh fuel and add a fuel stabilizer. Change engine oil and filter, and grease all lubrication points. Disconnect the battery and store it in a cool, dry place.
History & Background
The John Deere 8630 was introduced in 1978 as a high-horsepower articulated 4WD tractor. It represented a step forward in tractor design, offering farmers enhanced power and maneuverability. Its success helped establish John Deere as a leader in the large agricultural tractor market.
Frequently Asked Questions
What engine is in the John Deere 8630?
The John Deere 8630 is powered by a John Deere 466 cubic inch (7.6L) 6-cylinder turbocharged diesel engine producing approximately 270 horsepower.
What is the PTO horsepower on a 8630?
The John Deere 8630 has a PTO horsepower rating of approximately 225 HP at 1000 RPM.
What oil filter fits the 8630?
The John Deere 8630 typically uses a John Deere oil filter part number AR51715. Common cross-references include Wix 51794, Fram PH3756, and Baldwin B233.
What are common parts needed for the 8630?
Common wear parts for the John Deere 8630 include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic seals, steering components (tie rod ends, ball joints), clutch discs and plates, and PTO shaft seals.

T20328 - Oil Filler Cap Gasket
SKU: T20328
23 in stock

RE40476 - Piston Liner Kit
SKU: RE40476
42 in stock

RE507076 - Engine Oil Pump
SKU: RE507076
50 in stock

RE37417 - Upper Gasket Set
SKU: RE37417
1 in stock

RE37416 - Overhaul without Seals Gasket Set
SKU: RE37416
2 in stock

RE34009 - Head Gasket
SKU: RE34009
4 in stock

RE20291 - Piston Liner Kit
SKU: RE20291
11 in stock

JD8210 - TIMKEN CUP
SKU: JD8210
208 in stock

JD8939 - Taper Roller Bearing Cone
SKU: JD8939
2 in stock

JD7416 - Tapered Roller Bearing CUP
SKU: JD7416
5 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD
SKU: U12331
376 in stock

U10289 - Durometer 75 (10/Pack) .139" Thick O-Ring; 1.484" ID X 1.762" OD
SKU: U10289
1270 in stock

R77551 - Durometer 75 (12/Pack) .070" Thick O-Ring; .208" ID X .348" OD
SKU: R77551
1908 in stock

R72654 - Snap; 25/Pack Ring
SKU: R72654
925 in stock

R72653 - Snap; 50/Pack Ring
SKU: R72653
1800 in stock

R72328 - Durometer 75 (5/Pack) .103" Thick O-Ring; .737" ID X .943" OD
SKU: R72328
695 in stock

R71732 - Durometer 75 (5/Pack) O-Ring; 1.234" ID X 1.512" OD X .139" Thick
SKU: R71732
Out of stock

R69667 - Durometer 90 (4/Pack) O-Ring; .734" ID X 1.012" OD X .139" Thick
SKU: R69667
512 in stock

R62070 - Durometer 70 (5/Pack) .070" Thick O-Ring; .989" ID X 1.129" OD
SKU: R62070
185 in stock

R56757 - Durometer 75 (2/Pack) .139" Thick O-Ring; 3.609" ID X 3.887" OD
SKU: R56757
256 in stock

R56751 - Durometer 75 (2/Pack) O-Ring; .924" ID X 1.156" OD X .116" Thick
SKU: R56751
252 in stock

R51603 - Durometer 70 (10/Pack) O-Ring; .612" ID X .818" OD X .103" Thick
SKU: R51603
290 in stock

R29463 - Durometer 75 (5/Pack) .139" Thick O-Ring; 1.234" ID X 1.512" OD
SKU: R29463
400 in stock

R27928 - Durometer 75 (25/Pack) .070" Thick O-Ring; .926" ID X 1.066" OD
SKU: R27928
450 in stock
