John Deere 7200J Tractor Parts
7200J parts and accessories
The John Deere 7200J tractor, manufactured from 2007 to 2010, is a powerful and reliable workhorse for various agricultural tasks. Featuring a John Deere PowerTech 9.0L diesel engine delivering approximately 215 horsepower, and a PTO horsepower of around 180, the 7200J gained popularity among farmers for its robust performance and efficient operation in demanding field conditions. It quickly became a favorite for tillage and planting work.
The John Deere 7200J was produced from 2007 to 2010, filling a vital role in John Deere's tractor lineup. It's powered by a John Deere PowerTech 9.0L six-cylinder diesel engine, producing around 215 engine horsepower. The engine's high torque output made it well-suited for heavy-duty tasks. This model came standard with a powershift transmission offering smooth and efficient gear changes. The PTO horsepower is approximately 180, available in both 540 and 1000 RPM configurations, allowing for versatility with various implements. The hydraulic system boasts a flow rate of around 40 GPM, providing ample power for hydraulic motors and implements, with typically three to four rear remotes. The 3-point hitch is a Category III, capable of lifting over 9,000 lbs. The 7200J found its place in row crop operations, hay production, livestock farming, and various tillage applications. What set the 7200J apart from smaller models was its increased horsepower, heavier frame, and advanced transmission options that delivered the productivity needed for large farms and demanding applications.
Specifications
| Engine | John Deere PowerTech 9.0L 215 HP Diesel |
|---|---|
| PTO HP | 180 HP @ 540/1000 RPM |
| Transmission | Powershift, 16F/5R |
| Hydraulics | 40 GPM, 3-4 remotes |
| 3-Point Hitch | Category III, 9,480 lbs lift capacity |
| Fuel Capacity | 125 gallons |
| Weight | 18,340 lbs |
| Years Produced | 2007-2010 |
Maintenance Tips
- Engine Oil & Filter: Change the engine oil and filter every 250-300 hours using the recommended John Deere oil type and filter for optimal engine life.
- Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filters every 500 hours to prevent contamination and maintain proper hydraulic function.
- Fuel System: Use high-quality diesel fuel and check/replace the fuel filter at recommended intervals to prevent fuel system issues. Always drain any water accumulated in the fuel/water separator.
- Seasonal Storage: Before storing the tractor for extended periods, fill the fuel tank to prevent condensation, add a fuel stabilizer, and disconnect the battery to prevent discharge.
History & Background
The John Deere 7200J was introduced in 2007 as part of the 'J' series tractors, designed for improved comfort and performance. It offered a balance of power, efficiency, and operator convenience. While the model line was relatively short-lived, it cemented its position as a reliable workhorse in modern agricultural history.
Frequently Asked Questions
What engine is in the John Deere 7200J?
The John Deere 7200J is equipped with a John Deere PowerTech 9.0L six-cylinder diesel engine, producing approximately 215 horsepower.
What is the PTO horsepower on a 7200J?
The PTO horsepower on the John Deere 7200J is around 180 HP, and it offers both 540 and 1000 RPM PTO options.
What oil filter fits the 7200J?
The recommended oil filter for the John Deere 7200J is typically a John Deere filter part number RE504836. Cross-references may include Wix 57202 or Baldwin B7349.
What are common parts needed for the 7200J?
Commonly needed parts for the John Deere 7200J include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic cylinder seal kits, tie rod ends, steering cylinder seals, and clutch components (if applicable).

A5598R - Durometer 70 (2/Pack) .210" Thick O-Ring; 3.600" ID X 4.020" OD
SKU: A5598R
234 in stock

A3190R - Durometer 90 (5/Pack) .130" Thick O-Ring; .674" ID X .880" OD
SKU: A3190R
130 in stock

54M4422 - Yoke
SKU: 54M4422
46 in stock

40M7042 - External Snap; 24/Pack Ring
SKU: 40M7042
456 in stock

40M5099 - Internal Snap; 10/Pack Ring
SKU: 40M5099
1990 in stock

2785-P - Tapered Roller Bearing Cone
SKU: 2785-P
94 in stock

JD9954 - Roller Bearing
SKU: JD9954
456 in stock

WL9582 - RH Front / LH Rear Amber LED Warning Light
SKU: WL9582
172 in stock

WL9581 - LH Front / RH Rear Amber LED Warning Light
SKU: WL9581
165 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
63 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
365 in stock

WL6000 - Rectangle Hi / Low LED Work Lamp
SKU: WL6000
121 in stock

WL5500 - Amber LED Warning Light
SKU: WL5500
241 in stock

WL5362R - RH Flood LED; Oval Work Lamp
SKU: WL5362R
146 in stock

WL5361L - LH Flood LED; Oval Work Lamp
SKU: WL5361L
153 in stock

WL4460 - Hi / Low LED Sealed Beam
SKU: WL4460
309 in stock

WL338 - LED; Flood Work Lamp
SKU: WL338
271 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
364 in stock

WL1250 - Oval Flood LED Worklamp
SKU: WL1250
Out of stock

WL1245 - Oval Flood LED Work Lamp
SKU: WL1245
357 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
837 in stock

WL063 - Flood 3" X 5" LED; Rectangle Work Lamp
SKU: WL063
252 in stock

RE340681 - Flood LED; Rectangular Worklamp
SKU: RE340681
530 in stock

RE336112 - Trapezoid Worklight; Round LED Lamp
SKU: RE336112
364 in stock
