John Deere 7200J Tractor Parts
7200J parts and accessories
The John Deere 7200J tractor, manufactured from 2007 to 2010, is a powerful and reliable workhorse for various agricultural tasks. Featuring a John Deere PowerTech 9.0L diesel engine delivering approximately 215 horsepower, and a PTO horsepower of around 180, the 7200J gained popularity among farmers for its robust performance and efficient operation in demanding field conditions. It quickly became a favorite for tillage and planting work.
The John Deere 7200J was produced from 2007 to 2010, filling a vital role in John Deere's tractor lineup. It's powered by a John Deere PowerTech 9.0L six-cylinder diesel engine, producing around 215 engine horsepower. The engine's high torque output made it well-suited for heavy-duty tasks. This model came standard with a powershift transmission offering smooth and efficient gear changes. The PTO horsepower is approximately 180, available in both 540 and 1000 RPM configurations, allowing for versatility with various implements. The hydraulic system boasts a flow rate of around 40 GPM, providing ample power for hydraulic motors and implements, with typically three to four rear remotes. The 3-point hitch is a Category III, capable of lifting over 9,000 lbs. The 7200J found its place in row crop operations, hay production, livestock farming, and various tillage applications. What set the 7200J apart from smaller models was its increased horsepower, heavier frame, and advanced transmission options that delivered the productivity needed for large farms and demanding applications.
Specifications
| Engine | John Deere PowerTech 9.0L 215 HP Diesel |
|---|---|
| PTO HP | 180 HP @ 540/1000 RPM |
| Transmission | Powershift, 16F/5R |
| Hydraulics | 40 GPM, 3-4 remotes |
| 3-Point Hitch | Category III, 9,480 lbs lift capacity |
| Fuel Capacity | 125 gallons |
| Weight | 18,340 lbs |
| Years Produced | 2007-2010 |
Maintenance Tips
- Engine Oil & Filter: Change the engine oil and filter every 250-300 hours using the recommended John Deere oil type and filter for optimal engine life.
- Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filters every 500 hours to prevent contamination and maintain proper hydraulic function.
- Fuel System: Use high-quality diesel fuel and check/replace the fuel filter at recommended intervals to prevent fuel system issues. Always drain any water accumulated in the fuel/water separator.
- Seasonal Storage: Before storing the tractor for extended periods, fill the fuel tank to prevent condensation, add a fuel stabilizer, and disconnect the battery to prevent discharge.
History & Background
The John Deere 7200J was introduced in 2007 as part of the 'J' series tractors, designed for improved comfort and performance. It offered a balance of power, efficiency, and operator convenience. While the model line was relatively short-lived, it cemented its position as a reliable workhorse in modern agricultural history.
Frequently Asked Questions
What engine is in the John Deere 7200J?
The John Deere 7200J is equipped with a John Deere PowerTech 9.0L six-cylinder diesel engine, producing approximately 215 horsepower.
What is the PTO horsepower on a 7200J?
The PTO horsepower on the John Deere 7200J is around 180 HP, and it offers both 540 and 1000 RPM PTO options.
What oil filter fits the 7200J?
The recommended oil filter for the John Deere 7200J is typically a John Deere filter part number RE504836. Cross-references may include Wix 57202 or Baldwin B7349.
What are common parts needed for the 7200J?
Commonly needed parts for the John Deere 7200J include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic cylinder seal kits, tie rod ends, steering cylinder seals, and clutch components (if applicable).

AR21944 - Short Tie Rod
SKU: AR21944
90 in stock

60381 - Tie Rod Boot
SKU: 60381
487 in stock

U41966 - Durometer 75 (4/Pack) .103" Thick O-Ring; 1.424" ID X 1.630" OD
SKU: U41966
269 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD
SKU: U12331
376 in stock

U12037 - Durometer 75 (5/Pack) .139" Thickness O-Ring; 1.296" ID X 1.574" OD
SKU: U12037
615 in stock

U10289 - Durometer 75 (10/Pack) .139" Thick O-Ring; 1.484" ID X 1.762" OD
SKU: U10289
1270 in stock

R83630 - Durometer 85 (10/Pack) .139" Thick O-Ring; .796" ID X 1.074" OD
SKU: R83630
1060 in stock

R72654 - Snap; 25/Pack Ring
SKU: R72654
925 in stock

R65397 - Durometer 75 (2/Pack) .103" Thick O-Ring; .487" ID X .693" OD
SKU: R65397
548 in stock

R62070 - Durometer 70 (5/Pack) .070" Thick O-Ring; .989" ID X 1.129" OD
SKU: R62070
185 in stock

R56465 - Durometer 75 (1/Pack) .103" Thick O-Ring; .674" ID X .880" OD
SKU: R56465
184 in stock

R56464 - Durometer 75 (5/Pack) .103" Thick O-Ring; .549" ID X .755" OD
SKU: R56464
660 in stock

R56462 - Durometer 75 (5/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD
SKU: R56462
270 in stock

R56461 - Durometer 75 (5/Pack) .139" Thick O-Ring; 1.109" ID X 1.387" OD
SKU: R56461
455 in stock

R459R - Durometer 70 (25/Pack) .103" Thick O-Ring; .549" ID X .755 OD
SKU: R459R
625 in stock

R29463 - Durometer 75 (5/Pack) .139" Thick O-Ring; 1.234" ID X 1.512" OD
SKU: R29463
400 in stock

R26282 - Durometer 70 (4/Pack) .139" Thick O-Ring; 2.109" ID X 2.387" OD
SKU: R26282
136 in stock

R222761 - Durometer 90 (1/Pack) O-Ring; 1.239" ID X 1.379" OD
SKU: R222761
773 in stock

R21722 - Durometer 90 (5/Pack) .139" Thick O-Ring; .796" ID X 1.074" OD
SKU: R21722
135 in stock

R106663 - Durometer 75 (5/Pack) .070" Thick O-Ring; 1.176" ID X 1.316" OD
SKU: R106663
335 in stock

P50883 - Durometer 70 (10/Pack) .070" Thick O-Ring; .676" ID X .816" OD
SKU: P50883
100 in stock

P46051 - Durometer 70 (10/Pack) .103" Thick O-Ring; .424" ID X .630" OD
SKU: P46051
400 in stock

M40514 - External; 10/Pack Snap Ring
SKU: M40514
440 in stock

B2762R - Durometer 70 (10/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD
SKU: B2762R
1620 in stock
