John Deere 3350 Tractor Parts
3350 parts and accessories
The John Deere 3350 was a popular and versatile utility tractor manufactured from 1983 to 1989. Powered by a reliable John Deere diesel engine producing approximately 75 horsepower, it provided ample power for a variety of farm tasks. Known for its robust construction and useful 65 PTO horsepower, the 3350 was a favorite among farmers for its dependability and adaptability to diverse agricultural operations.
The John Deere 3350 was introduced in 1983 as part of John Deere's 50 Series tractors, replacing earlier models in the utility tractor segment. Production continued until 1989. It features a John Deere 4.239D diesel engine, a 239 cubic inch (3.9L) four-cylinder engine, rated at approximately 75 engine horsepower. The transmission options included a SyncroPlus transmission with varying speeds, typically an 8-speed or 16-speed forward/reverse configurations. The 3350 offered a PTO horsepower of around 65, available in both 540 and 1000 RPM options, catering to different implement requirements. The hydraulic system delivered a flow rate of approximately 17.2 GPM, supporting up to two remote hydraulic valves. The 3-point hitch was a Category II, providing a lift capacity of around 4,400 lbs. Farmers commonly used the 3350 for tasks like row crop cultivation, hay baling, livestock feeding, and light tillage. Compared to smaller models, the 3350 offered more power and hydraulic capacity, while being more compact and fuel-efficient than larger frame tractors.
Specifications
| Engine | John Deere 4.239D 75 HP Diesel |
|---|---|
| PTO HP | 65 HP @ 540/1000 RPM |
| Transmission | SyncroPlus 8/16 Speed |
| Hydraulics | 17.2 GPM, 2 remotes |
| 3-Point Hitch | Category II, 4400 lbs |
| Fuel Capacity | 27 gallons |
| Weight | 7606 lbs |
| Years Produced | 1983-1989 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 250 hours using the recommended John Deere oil type and filter. Regularly check the oil level and look for any signs of contamination.
- Hydraulic System: Inspect hydraulic fluid levels and filters every 500 hours. Replace hydraulic filters as needed and use only specified hydraulic fluid to prevent damage to the system.
- Fuel System: Use clean, high-quality diesel fuel and replace fuel filters every 500 hours. Drain any water accumulation in the fuel tank regularly to prevent injector issues.
- Seasonal Storage: Before storing the tractor for extended periods, fill the fuel tank to prevent condensation, add a fuel stabilizer, and disconnect the battery. Grease all fittings and store the tractor in a dry, sheltered area.
History & Background
The John Deere 3350 was introduced in 1983 as part of the 50 Series tractors, which aimed to provide more efficient and versatile options for farmers. This model filled a crucial gap in John Deere's lineup, offering a balance of power and maneuverability. Its success solidified John Deere's reputation for producing reliable and practical agricultural machinery.
Frequently Asked Questions
What engine is in the John Deere 3350?
The John Deere 3350 is equipped with a John Deere 4.239D four-cylinder diesel engine. This engine produces approximately 75 horsepower and provides reliable performance for various agricultural tasks.
What is the PTO horsepower on a 3350?
The John Deere 3350 has a PTO horsepower rating of approximately 65 horsepower. It offers both 540 and 1000 RPM PTO options, allowing compatibility with a wide range of implements.
What oil filter fits the 3350?
The recommended oil filter for the John Deere 3350 is a John Deere filter part number AR73690 or equivalent. Cross-references include Fram PH3600, Wix 51794, and Baldwin B1421. Always verify fitment before installation.
What are common parts needed for the 3350?
Common wear parts for the John Deere 3350 include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic seals (especially for the remote valves and cylinders), steering components (tie rod ends, ball joints), and clutch parts (disc, pressure plate, release bearing).

R79626 - EXHAUST (.015") VALVE
SKU: R79626
10 in stock

R79625 - Exhaust (.003") Valve
SKU: R79625
228 in stock

R79624 - Exhaust (Std) Valve
SKU: R79624
109 in stock

R79623 - Intake (Std) Valve
SKU: R79623
87 in stock

R79606 - Tee Fitting
SKU: R79606
259 in stock

R79605 - Grommet
SKU: R79605
5681 in stock

R79604 - Injector NUT
SKU: R79604
200 in stock

R75728 - Rocker Cover Gasket
SKU: R75728
18 in stock

R74194 - Connecting Rod (2.500" long) Capscrew
SKU: R74194
638 in stock

R60746 - Pencil Injector Washer
SKU: R60746
39 in stock

R57451 - Connecting Rod Bushing
SKU: R57451
430 in stock

R56188 - Piston Pin
SKU: R56188
11 in stock

R55647 - Connecting Rod Bushing
SKU: R55647
501 in stock

R55127 - Oil Cooler Hose
SKU: R55127
46 in stock

R54114 - Piston Pin Retainer
SKU: R54114
113 in stock

R51937 - Injector Nozzle Nut
SKU: R51937
614 in stock

R51936 - Injector Lines Grommet
SKU: R51936
12010 in stock

R51736 - Elbow To Turbo Adapter
SKU: R51736
44 in stock
R51735 - INLET VALVE
SKU: R51735
15 in stock

R51734 - Exhaust Valve (Std) Insert
SKU: R51734
192 in stock

R51731 - Piston Pin
SKU: R51731
41 in stock

R51726 - Cylinder Liner
SKU: R51726
10 in stock

R48000 - Pencil Injector Seal
SKU: R48000
1196 in stock

R28795 - Pre-Cleaner (10.5") Bowl
SKU: R28795
976 in stock
