John Deere 3350 Tractor Parts
3350 parts and accessories
The John Deere 3350 was a popular and versatile utility tractor manufactured from 1983 to 1989. Powered by a reliable John Deere diesel engine producing approximately 75 horsepower, it provided ample power for a variety of farm tasks. Known for its robust construction and useful 65 PTO horsepower, the 3350 was a favorite among farmers for its dependability and adaptability to diverse agricultural operations.
The John Deere 3350 was introduced in 1983 as part of John Deere's 50 Series tractors, replacing earlier models in the utility tractor segment. Production continued until 1989. It features a John Deere 4.239D diesel engine, a 239 cubic inch (3.9L) four-cylinder engine, rated at approximately 75 engine horsepower. The transmission options included a SyncroPlus transmission with varying speeds, typically an 8-speed or 16-speed forward/reverse configurations. The 3350 offered a PTO horsepower of around 65, available in both 540 and 1000 RPM options, catering to different implement requirements. The hydraulic system delivered a flow rate of approximately 17.2 GPM, supporting up to two remote hydraulic valves. The 3-point hitch was a Category II, providing a lift capacity of around 4,400 lbs. Farmers commonly used the 3350 for tasks like row crop cultivation, hay baling, livestock feeding, and light tillage. Compared to smaller models, the 3350 offered more power and hydraulic capacity, while being more compact and fuel-efficient than larger frame tractors.
Specifications
| Engine | John Deere 4.239D 75 HP Diesel |
|---|---|
| PTO HP | 65 HP @ 540/1000 RPM |
| Transmission | SyncroPlus 8/16 Speed |
| Hydraulics | 17.2 GPM, 2 remotes |
| 3-Point Hitch | Category II, 4400 lbs |
| Fuel Capacity | 27 gallons |
| Weight | 7606 lbs |
| Years Produced | 1983-1989 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 250 hours using the recommended John Deere oil type and filter. Regularly check the oil level and look for any signs of contamination.
- Hydraulic System: Inspect hydraulic fluid levels and filters every 500 hours. Replace hydraulic filters as needed and use only specified hydraulic fluid to prevent damage to the system.
- Fuel System: Use clean, high-quality diesel fuel and replace fuel filters every 500 hours. Drain any water accumulation in the fuel tank regularly to prevent injector issues.
- Seasonal Storage: Before storing the tractor for extended periods, fill the fuel tank to prevent condensation, add a fuel stabilizer, and disconnect the battery. Grease all fittings and store the tractor in a dry, sheltered area.
History & Background
The John Deere 3350 was introduced in 1983 as part of the 50 Series tractors, which aimed to provide more efficient and versatile options for farmers. This model filled a crucial gap in John Deere's lineup, offering a balance of power and maneuverability. Its success solidified John Deere's reputation for producing reliable and practical agricultural machinery.
Frequently Asked Questions
What engine is in the John Deere 3350?
The John Deere 3350 is equipped with a John Deere 4.239D four-cylinder diesel engine. This engine produces approximately 75 horsepower and provides reliable performance for various agricultural tasks.
What is the PTO horsepower on a 3350?
The John Deere 3350 has a PTO horsepower rating of approximately 65 horsepower. It offers both 540 and 1000 RPM PTO options, allowing compatibility with a wide range of implements.
What oil filter fits the 3350?
The recommended oil filter for the John Deere 3350 is a John Deere filter part number AR73690 or equivalent. Cross-references include Fram PH3600, Wix 51794, and Baldwin B1421. Always verify fitment before installation.
What are common parts needed for the 3350?
Common wear parts for the John Deere 3350 include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic seals (especially for the remote valves and cylinders), steering components (tie rod ends, ball joints), and clutch parts (disc, pressure plate, release bearing).

L41330 - Fan Belt
SKU: L41330
48 in stock

DZ100555 - 180° Thermostat
SKU: DZ100555
39 in stock

AR48675 - 180° Thermostat
SKU: AR48675
491 in stock

AL66766 - Radiator
SKU: AL66766
10 in stock

AL56375 - Radiator
SKU: AL56375
6 in stock

R35286 - Plug (2/Pack)
SKU: R35286
87 in stock

R26637 - Outer Clutch Plate / Cover Spring
SKU: R26637
950 in stock

R234266 - Clutch Control Valve Cover Gasket
SKU: R234266
53 in stock

L40966 - Sealing Ring; (25/Pack) Washer
SKU: L40966
300 in stock

AL70273 - heavy duty spring loaded feramic 6-button Trans Disc: 12.875"
SKU: AL70273
3 in stock

AL69935 - 10 Spline Spring Loaded Organic Trans Disc: 12.875"
SKU: AL69935
46 in stock

AL68485 - w/ Release Plate w/ .85" Flywheel Step Cast Iron Pressure Plate: 12.875"
SKU: AL68485
72 in stock

AL64948 - incls p. plate & trans disc for flywheel w/ .85" step Diaphram SET: 13"
SKU: AL64948
27 in stock

AL64759 - 10 spline spring loaded feramic 7 button Trans Disc: 12.598"
SKU: AL64759
16 in stock

AL57415 - JOHN DEERE
SKU: AL57415
21 in stock

AL39541 - Trans Release (greaseable aluminum body) Bearing
SKU: AL39541
234 in stock

AL39242 - 3 port (sealed) w/Slave Cyl Trans Release Bearing
SKU: AL39242
14 in stock

AL36133 - metallic Trans Disc: 12.598" torsion-damp
SKU: AL36133
16 in stock

AL120095 - Release Bearing
SKU: AL120095
47 in stock

AL120029 - 3 port (sealed) w/Slave Cyl Trans Release Bearing
SKU: AL120029
14 in stock

AL120028 - 2 port (sealed) w/ Slave Cyl Trans Release Bearing
SKU: AL120028
46 in stock

AL120025 - 1-3/4" 27 Spline w/o Release Plate Cast Iron Pressure Plate: 12"
SKU: AL120025
21 in stock

6202-2RS-I - Flat Edge Ball; 6200 Series Bearing
SKU: 6202-2RS-I
257 in stock

MIA12926 - PMDD Starter
SKU: MIA12926
77 in stock
