John Deere 9410 Combine Parts

9410 parts and accessories

The John Deere 9410 combine, manufactured from 1996-1999, was a popular choice for farmers needing a reliable conventional combine. Powered by a John Deere engine producing around 195 HP, it offered header widths suitable for varying field sizes. Known for its simplicity and effective grain separation, the 9410 provided a dependable solution for harvesting wheat, soybeans, and corn.

The John Deere 9410 combine was introduced in 1996 as part of the '10 Series' combines, replacing earlier models and offering improved efficiency. It was produced until 1999. The 9410 is powered by a John Deere 6.8L 6-cylinder diesel engine, producing approximately 195 horsepower. It employs a conventional threshing system featuring a 66-inch wide cylinder and a walker-style separator. The grain tank has a capacity of around 170 bushels, and the unloading auger can empty the tank at a rate of approximately 50-60 bushels per minute. Header widths commonly ranged from 13 to 25 feet. Options included a straw chopper or spreader, and the cab featured improved operator comfort and controls. The 9410 excelled in harvesting small grains like wheat and soybeans, while also proving capable in corn harvesting with appropriate header adjustments.

Specifications

Engine	John Deere 6.8L 195 HP Diesel
Separator Type	Conventional - 66-inch Cylinder width
Grain Tank	170 bushels
Unloading Rate	50-60 bu/min
Header Widths	13-25 ft
Fuel Capacity	90 gallons
Weight	Approx. 18,000 lbs
Years Produced	1996-1999

Maintenance Tips

Concave Adjustment: Regularly check and adjust the concave clearance to optimize threshing performance and minimize grain damage. Refer to the operator's manual for recommended settings based on the crop being harvested.
Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts can slip, reducing efficiency, while worn chains can break. Adjust or replace as needed.
Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to prevent buildup of chaff and debris, ensuring efficient grain separation and minimizing grain loss.
Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. Pay particular attention to bearings in high-stress areas like the header and threshing system.
Pre-Season Inspection: Before each harvesting season, thoroughly inspect the entire combine, checking for any signs of damage, wear, or corrosion. Replace any worn or damaged parts to ensure optimal performance and prevent breakdowns during the critical harvest period.

History & Background

The John Deere 9410 was a key model in the '10 Series' combines, introduced in 1996. Representing a refinement of previous conventional combines, it offered enhanced reliability and efficiency for farmers. While not revolutionary, the 9410 established itself as a dependable workhorse in fields across the grain belt.

Frequently Asked Questions

What engine is in the John Deere 9410?

The John Deere 9410 is equipped with a John Deere 6.8L 6-cylinder diesel engine, producing approximately 195 horsepower.

What is the grain tank capacity on a 9410?

The grain tank capacity of the John Deere 9410 is around 170 bushels, with an unloading rate of 50-60 bushels per minute.

What type of separator does the 9410 have?

The John Deere 9410 utilizes a conventional threshing system featuring a 66-inch wide cylinder and walker-style separators.

What are common parts needed for the 9410?

Common wear parts for the John Deere 9410 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections. Regular inspection and replacement of these parts are crucial for maintaining optimal performance.

Showing 481-504 of 571 products

Sort by: