John Deere 7700 Combine Parts
The John Deere 7700 Combine, manufactured from 1977 to 1984, was a popular choice for farmers due to its reliable performance and efficient conventional threshing system. Powered by a John Deere diesel engine producing approximately 175 horsepower, it offered header widths up to 20 feet, making it suitable for a variety of grain harvesting operations. Its robust design contributed to its reputation for dependability in the field.
The John Deere 7700 combine was introduced in 1977 and remained in production until 1984, establishing itself as a workhorse for many farmers. It was powered by a John Deere 6-cylinder diesel engine, typically producing around 175 horsepower with a displacement of approximately 466 cubic inches. The 7700 utilized a conventional threshing system with a cylinder width of around 43 inches. Grain tank capacity was approximately 135 bushels, and the unloading auger could empty the tank at a rate of about 45 bushels per minute. Available header widths ranged from 13 to 20 feet. It also featured options for a straw chopper or spreader. The cab, while not as advanced as later models, provided a functional workspace for the operator. The 7700 excelled at harvesting a variety of crops, including wheat, soybeans, and corn, thanks to its adjustable threshing settings and header options.
Specifications
| Engine | John Deere 175 HP 466 cu. in. Diesel |
|---|---|
| Separator Type | Conventional - 43-inch cylinder width |
| Grain Tank | 135 bushels |
| Unloading Rate | 45 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 75 gallons |
| Weight | Approximately 16,000 lbs |
| Years Produced | 1977-1984 |
Maintenance Tips
- Regularly inspect and adjust concave clearance to optimize threshing performance and minimize grain loss.
- Check belt and chain tension frequently, especially at the start of the season, to prevent slippage and premature wear.
- Clean sieves and chaffers daily to ensure proper separation and prevent plugging, which can reduce efficiency.
- Grease all bearings and lubrication points according to the manufacturer's recommendations to prevent premature failure and extend component life.
History & Background
Introduced in 1977, the John Deere 7700 replaced earlier models and provided increased capacity and efficiency. While there weren't major redesigns during its production run, John Deere continually refined components for improved reliability. The 7700 played a significant role in the transition towards larger, more productive combine harvesters.
Frequently Asked Questions
What engine is in the John Deere 7700?
The John Deere 7700 is equipped with a John Deere 6-cylinder diesel engine, typically producing around 175 horsepower with a displacement of approximately 466 cubic inches.
What is the grain tank capacity on a 7700?
The grain tank capacity of the John Deere 7700 is approximately 135 bushels, and the unloading rate is around 45 bushels per minute.
What type of separator does the 7700 have?
The John Deere 7700 utilizes a conventional threshing system with a 43-inch wide cylinder.
What are common parts needed for the 7700?
Common wear parts for the John Deere 7700 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections.

R28024 - Wedge Blocks on Tie Rod Bolts
SKU: R28024
90 in stock

R131288 - Tie Rod Tube
SKU: R131288
17 in stock

R109808 - Pivot Pin Bushing
SKU: R109808
121 in stock

U13639 - Durometer 90 (2/Pack) .118" Thick O-Ring; 1.475" ID X 1.711" OD
SKU: U13639
1626 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD
SKU: U12331
376 in stock

U10289 - Durometer 75 (10/Pack) .139" Thick O-Ring; 1.484" ID X 1.762" OD
SKU: U10289
1270 in stock

T13119 - Durometer 75 (10/Pack) .103" Thick O-Ring; .737" ID X .943" OD
SKU: T13119
140 in stock

R72328 - Durometer 75 (5/Pack) .103" Thick O-Ring; .737" ID X .943" OD
SKU: R72328
695 in stock

R71732 - Durometer 75 (5/Pack) O-Ring; 1.234" ID X 1.512" OD X .139" Thick
SKU: R71732
Out of stock

R62070 - Durometer 70 (5/Pack) .070" Thick O-Ring; .989" ID X 1.129" OD
SKU: R62070
185 in stock

R51603 - Durometer 70 (10/Pack) O-Ring; .612" ID X .818" OD X .103" Thick
SKU: R51603
290 in stock

R459R - Durometer 70 (25/Pack) .103" Thick O-Ring; .549" ID X .755 OD
SKU: R459R
625 in stock

R28782 - Durometer 90 (25/Pack) .072" Thick O-Ring; .351" ID X .495" OD
SKU: R28782
600 in stock

R27149 - Durometer 75 (5/Pack) .139" Thick O-Ring; .921" ID X 1.199" OD
SKU: R27149
235 in stock

P47889 - Durometer 70 (2/Pack) .103" Thick O-Ring; .799" ID X 1.005" OD
SKU: P47889
862 in stock

P46051 - Durometer 70 (10/Pack) .103" Thick O-Ring; .424" ID X .630" OD
SKU: P46051
400 in stock

P42061 - Durometer 75 (5/Pack) .070" Thick O-Ring; .864" ID X 1.004" OD
SKU: P42061
105 in stock

M40514 - External; 10/Pack Snap Ring
SKU: M40514
440 in stock

F3353R - Durometer 75 (10/Pack) O-Ring; .362" ID X .568" OD X .103" Thick
SKU: F3353R
720 in stock

B3690R - Durometer 75 (5/Pack) O-Ring; 1.859" ID X 2.137" OD X .139" Thick
SKU: B3690R
425 in stock

B2762R - Durometer 70 (10/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD
SKU: B2762R
1620 in stock

A5598R - Durometer 70 (2/Pack) .210" Thick O-Ring; 3.600" ID X 4.020" OD
SKU: A5598R
234 in stock

H77683 - Hydrostatic Reel Pump / Compressor Belt
SKU: H77683
78 in stock

H77010 - Shoe Grain Supply Augers Belt
SKU: H77010
66 in stock
