John Deere 7700 Combine Parts
The John Deere 7700 Combine, manufactured from 1977 to 1984, was a popular choice for farmers due to its reliable performance and efficient conventional threshing system. Powered by a John Deere diesel engine producing approximately 175 horsepower, it offered header widths up to 20 feet, making it suitable for a variety of grain harvesting operations. Its robust design contributed to its reputation for dependability in the field.
The John Deere 7700 combine was introduced in 1977 and remained in production until 1984, establishing itself as a workhorse for many farmers. It was powered by a John Deere 6-cylinder diesel engine, typically producing around 175 horsepower with a displacement of approximately 466 cubic inches. The 7700 utilized a conventional threshing system with a cylinder width of around 43 inches. Grain tank capacity was approximately 135 bushels, and the unloading auger could empty the tank at a rate of about 45 bushels per minute. Available header widths ranged from 13 to 20 feet. It also featured options for a straw chopper or spreader. The cab, while not as advanced as later models, provided a functional workspace for the operator. The 7700 excelled at harvesting a variety of crops, including wheat, soybeans, and corn, thanks to its adjustable threshing settings and header options.
Specifications
| Engine | John Deere 175 HP 466 cu. in. Diesel |
|---|---|
| Separator Type | Conventional - 43-inch cylinder width |
| Grain Tank | 135 bushels |
| Unloading Rate | 45 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 75 gallons |
| Weight | Approximately 16,000 lbs |
| Years Produced | 1977-1984 |
Maintenance Tips
- Regularly inspect and adjust concave clearance to optimize threshing performance and minimize grain loss.
- Check belt and chain tension frequently, especially at the start of the season, to prevent slippage and premature wear.
- Clean sieves and chaffers daily to ensure proper separation and prevent plugging, which can reduce efficiency.
- Grease all bearings and lubrication points according to the manufacturer's recommendations to prevent premature failure and extend component life.
History & Background
Introduced in 1977, the John Deere 7700 replaced earlier models and provided increased capacity and efficiency. While there weren't major redesigns during its production run, John Deere continually refined components for improved reliability. The 7700 played a significant role in the transition towards larger, more productive combine harvesters.
Frequently Asked Questions
What engine is in the John Deere 7700?
The John Deere 7700 is equipped with a John Deere 6-cylinder diesel engine, typically producing around 175 horsepower with a displacement of approximately 466 cubic inches.
What is the grain tank capacity on a 7700?
The grain tank capacity of the John Deere 7700 is approximately 135 bushels, and the unloading rate is around 45 bushels per minute.
What type of separator does the 7700 have?
The John Deere 7700 utilizes a conventional threshing system with a 43-inch wide cylinder.
What are common parts needed for the 7700?
Common wear parts for the John Deere 7700 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections.

RE22764 - Rear Crankshaft Seal
SKU: RE22764
509 in stock

RE20042 - Fuel Pump
SKU: RE20042
5 in stock

AH87542 - Spindle (LH)
SKU: AH87542
1 in stock

AH87540 - Spindle (RH)
SKU: AH87540
4 in stock

AH75397 - Cylinder End
SKU: AH75397
10 in stock

H99060 - Hydro Drive Coupler
SKU: H99060
19 in stock

H91808 - Splined; Final Drive Coupling
SKU: H91808
49 in stock

H85887 - (Cast Iron) Brake Drum
SKU: H85887
20 in stock

H85871 - Transmission Brake Shaft
SKU: H85871
14 in stock

H85817 - 11 Tooth Pinion Shaft
SKU: H85817
15 in stock

H81605 - for Sunstrand Unit Hydro Motor Shaft
SKU: H81605
4 in stock

H76111 - Hydro Motor Stub Drive Shaft
SKU: H76111
28 in stock

H123630 - Axle Drive Shaft
SKU: H123630
8 in stock

H123629 - Axle Drive Shaft
SKU: H123629
14 in stock

H123614 - Axle Drive Shaft
SKU: H123614
16 in stock

H123613 - Axle Drive Shaft
SKU: H123613
43 in stock

H123612 - Axle Drive Shaft
SKU: H123612
6 in stock

H114203 - 10 Tooth Pinion Shaft
SKU: H114203
19 in stock

H106283 - Drive Coupler
SKU: H106283
84 in stock

AH65358 - Tapered Roller Bearing
SKU: AH65358
33 in stock

AH128391 - Pinion Seal Assy
SKU: AH128391
16 in stock

AH109692 - Input (Hydro Trans) Shaft
SKU: AH109692
19 in stock

R78026 - LH thread Jam Nut
SKU: R78026
12 in stock

R78025 - RH thread Jam Nut
SKU: R78025
9 in stock
