Ford New Holland 231 Tractor Parts
231 parts and accessories
The Ford New Holland 231, manufactured from 1983 to 1992, was a popular utility tractor known for its reliability and versatility. Powered by a robust 33 horsepower Shibaura diesel engine (approximately), and offering around 28 PTO horsepower, it was a dependable workhorse on small to medium-sized farms. Farmers appreciated its simplicity and ability to handle a variety of tasks, from mowing to light tillage.
The Ford New Holland 231 emerged in 1983 as a part of Ford's comprehensive tractor lineup, continuing production until 1992 under the Ford New Holland banner. Its engine was a Shibaura 1.5L 3-cylinder diesel engine producing approximately 33 horsepower. This provided ample power for its intended applications. The transmission was a gear-driven system, typically an 8-speed forward and 2-speed reverse transmission, offering a good range of speeds for different tasks. The PTO delivered around 28 horsepower at a standard 540 RPM. Hydraulic capacity was around 6 GPM. The 3-point hitch was a Category I hitch, capable of lifting around 1800 lbs. The 231 found widespread use in hay production, livestock operations, and general farm maintenance. It was distinct from larger models with its compact size and fuel efficiency, while offering more capability than lawn and garden tractors. This made it a sweet spot for many farms.
Specifications
| Engine | Shibaura 1.5L 33 HP Diesel |
|---|---|
| PTO HP | 28 HP @ 540 RPM |
| Transmission | Gear, 8 Forward / 2 Reverse |
| Hydraulics | 6 GPM, 1 remotes |
| 3-Point Hitch | Category I, 1800 lbs Lift Capacity |
| Fuel Capacity | 11 gallons |
| Weight | 3200 lbs |
| Years Produced | 1983-1992 |
Maintenance Tips
- Change the engine oil and filter every 250 hours of operation. Use an oil that meets the manufacturer's specifications for diesel engines.
- Inspect and clean the hydraulic system regularly, including checking the fluid level and condition. Replace hydraulic filters according to the service schedule to prevent contamination.
- Keep the fuel system clean by using quality fuel and adding a fuel stabilizer, especially during seasonal storage. Drain the sediment bowl regularly to remove any water or debris.
- Before storing the tractor for an extended period, drain the fuel tank, change the engine oil, and grease all fittings to prevent corrosion. Consider using a battery maintainer to prevent battery discharge.
History & Background
The Ford New Holland 231 was introduced in 1983, replacing earlier Ford models and continuing as part of the Ford New Holland line after the acquisition. There were no significant redesigns during its production run, and it served as a reliable and affordable option for farmers. The 231 contributed to the legacy of Ford and Ford New Holland tractors as dependable and practical machines.
Frequently Asked Questions
What engine is in the Ford New Holland 231?
The Ford New Holland 231 is equipped with a Shibaura 1.5L 3-cylinder diesel engine, producing approximately 33 horsepower.
What is the PTO horsepower on a 231?
The Ford New Holland 231 has a PTO horsepower rating of approximately 28 horsepower at 540 RPM.
What oil filter fits the 231?
The correct oil filter for a Ford New Holland 231 is commonly cross-referenced as a Fram PH3614, Wix 51348, or a NAPA 1348. Always verify compatibility with your specific tractor's manual or parts catalog.
What are common parts needed for the 231?
Common parts needed for the Ford New Holland 231 include engine oil filters, fuel filters, hydraulic filters, belts for the engine and accessories, hydraulic seals for the 3-point hitch and remotes, steering components like tie rod ends, and clutch parts such as the clutch disc and pressure plate.

C5NN3A443A - Rear Pivot Bushing
SKU: C5NN3A443A
12 in stock

C5NN3A302B - Power Steering Cyl Ref. 1 (1) Rod End Ball Joint
SKU: C5NN3A302B
160 in stock

C5NN3A299A - Thrust Spindle Bearing
SKU: C5NN3A299A
267 in stock

C5NN3707A - Steering Gear Worm Bearing Lock Nut
SKU: C5NN3707A
25 in stock

C5NN3552A - Upper Steering Shaft Bearing & Race
SKU: C5NN3552A
115 in stock

C5NN3517A - Steering Shaft Bushing
SKU: C5NN3517A
181 in stock

C5NN3405A - Radius Rod Assembly (RH/LH)
SKU: C5NN3405A
5 in stock

C5NN3153D - Center Axle Bushing
SKU: C5NN3153D
7 in stock

C5NN3128B - Locking Flange
SKU: C5NN3128B
7 in stock

C5NN3127B - Front Axle Pin
SKU: C5NN3127B
15 in stock

C5NN3125A - Steering Arm Dust Seal
SKU: C5NN3125A
404 in stock

C5NN3110B - Upper/ Lower Bushing
SKU: C5NN3110B
92 in stock

C5NN3110A - Lower Bushing
SKU: C5NN3110A
284 in stock

C5NN3106S - Spindle (LH)
SKU: C5NN3106S
2 in stock

C5NN3106R - Spindle (LH)
SKU: C5NN3106R
96 in stock

C5NN3105V - Spindle (RH)
SKU: C5NN3105V
17 in stock

C5NN3105U - Spindle (RH)
SKU: C5NN3105U
Out of stock

C0NN3123B - Thrust Spindle Bearing
SKU: C0NN3123B
242 in stock

9966308 - Thrust; MFWD Plate
SKU: 9966308
8 in stock

957E3287 - Clamp
SKU: 957E3287
63 in stock

957E1195 - Spindle Tab Washer
SKU: 957E1195
85 in stock

957E1190A - Seal
SKU: 957E1190A
693 in stock

957E1139 - Hub Cap
SKU: 957E1139
12 in stock

8N3571 - Steering Gear Thrust Bearing
SKU: 8N3571
403 in stock
