Ford New Holland 231 Tractor Parts
231 parts and accessories
The Ford New Holland 231, manufactured from 1983 to 1992, was a popular utility tractor known for its reliability and versatility. Powered by a robust 33 horsepower Shibaura diesel engine (approximately), and offering around 28 PTO horsepower, it was a dependable workhorse on small to medium-sized farms. Farmers appreciated its simplicity and ability to handle a variety of tasks, from mowing to light tillage.
The Ford New Holland 231 emerged in 1983 as a part of Ford's comprehensive tractor lineup, continuing production until 1992 under the Ford New Holland banner. Its engine was a Shibaura 1.5L 3-cylinder diesel engine producing approximately 33 horsepower. This provided ample power for its intended applications. The transmission was a gear-driven system, typically an 8-speed forward and 2-speed reverse transmission, offering a good range of speeds for different tasks. The PTO delivered around 28 horsepower at a standard 540 RPM. Hydraulic capacity was around 6 GPM. The 3-point hitch was a Category I hitch, capable of lifting around 1800 lbs. The 231 found widespread use in hay production, livestock operations, and general farm maintenance. It was distinct from larger models with its compact size and fuel efficiency, while offering more capability than lawn and garden tractors. This made it a sweet spot for many farms.
Specifications
| Engine | Shibaura 1.5L 33 HP Diesel |
|---|---|
| PTO HP | 28 HP @ 540 RPM |
| Transmission | Gear, 8 Forward / 2 Reverse |
| Hydraulics | 6 GPM, 1 remotes |
| 3-Point Hitch | Category I, 1800 lbs Lift Capacity |
| Fuel Capacity | 11 gallons |
| Weight | 3200 lbs |
| Years Produced | 1983-1992 |
Maintenance Tips
- Change the engine oil and filter every 250 hours of operation. Use an oil that meets the manufacturer's specifications for diesel engines.
- Inspect and clean the hydraulic system regularly, including checking the fluid level and condition. Replace hydraulic filters according to the service schedule to prevent contamination.
- Keep the fuel system clean by using quality fuel and adding a fuel stabilizer, especially during seasonal storage. Drain the sediment bowl regularly to remove any water or debris.
- Before storing the tractor for an extended period, drain the fuel tank, change the engine oil, and grease all fittings to prevent corrosion. Consider using a battery maintainer to prevent battery discharge.
History & Background
The Ford New Holland 231 was introduced in 1983, replacing earlier Ford models and continuing as part of the Ford New Holland line after the acquisition. There were no significant redesigns during its production run, and it served as a reliable and affordable option for farmers. The 231 contributed to the legacy of Ford and Ford New Holland tractors as dependable and practical machines.
Frequently Asked Questions
What engine is in the Ford New Holland 231?
The Ford New Holland 231 is equipped with a Shibaura 1.5L 3-cylinder diesel engine, producing approximately 33 horsepower.
What is the PTO horsepower on a 231?
The Ford New Holland 231 has a PTO horsepower rating of approximately 28 horsepower at 540 RPM.
What oil filter fits the 231?
The correct oil filter for a Ford New Holland 231 is commonly cross-referenced as a Fram PH3614, Wix 51348, or a NAPA 1348. Always verify compatibility with your specific tractor's manual or parts catalog.
What are common parts needed for the 231?
Common parts needed for the Ford New Holland 231 include engine oil filters, fuel filters, hydraulic filters, belts for the engine and accessories, hydraulic seals for the 3-point hitch and remotes, steering components like tie rod ends, and clutch parts such as the clutch disc and pressure plate.

309825F - Filter Conversion (Gas or DSL) Kit
SKU: 309825F
44 in stock

3044506R1 - Fuel Filter
SKU: 3044506R1
1411 in stock

WBKFD5 - Wheel Bearing Kit
SKU: WBKFD5
111 in stock

WBKFD4 - Wheel Bearing Kit
SKU: WBKFD4
123 in stock

SSRK632A - Steering Shaft Repair Kit
SKU: SSRK632A
154 in stock

SBBSKIT04 - Bearing & Seal Spindle Bushing Kit
SKU: SBBSKIT04
81 in stock

SBBSKIT03 - Bearing & Seal Spindle Bushing Kit
SKU: SBBSKIT03
35 in stock

NT12 - Front Wheel Nut
SKU: NT12
740 in stock

NCA3110A - Spindle Bushing
SKU: NCA3110A
219 in stock

NCA1190A - Seal
SKU: NCA1190A
79 in stock

JLM104948-I - Tapered Roller Bearing Cone
SKU: JLM104948-I
371 in stock

F2NN3106CA - Spindle (LH)
SKU: F2NN3106CA
1 in stock

F2NN3105CA - Spindle (RH)
SKU: F2NN3105CA
26 in stock

E9NN3106BA - Spindle (LH)
SKU: E9NN3106BA
30 in stock

E9NN3105BA - Spindle (RH)
SKU: E9NN3105BA
47 in stock

E4NN3N576AA - 10T Steering Sector Shaft; Double
SKU: E4NN3N576AA
19 in stock

E4NN3N575AA - 4T Steering Sector Shaft; Single
SKU: E4NN3N575AA
8 in stock

E4NN3590AA - Steering Box Drop Arm
SKU: E4NN3590AA
12 in stock

E4NN3127AA - Front Axle Pin
SKU: E4NN3127AA
10 in stock

E2NN3A540SK - CTD Cylinders Kit
SKU: E2NN3A540SK
14 in stock

E2NN3A540RDCTD - CYLINDER ROD
SKU: E2NN3A540RDCTD
15 in stock

E2NN3A540BA - Universal PS Cylinder w/ Both Ends (RH/LH) REF. 3 (1)
SKU: E2NN3A540BA
65 in stock

E1ADKN3556 - Lower Steering Shaft Bearing & Race
SKU: E1ADKN3556
17 in stock

E0NN3N442BA - Radius Rod Ball Socket
SKU: E0NN3N442BA
Out of stock
