Ford New Holland 231 Tractor Parts
231 parts and accessories
The Ford New Holland 231, manufactured from 1983 to 1992, was a popular utility tractor known for its reliability and versatility. Powered by a robust 33 horsepower Shibaura diesel engine (approximately), and offering around 28 PTO horsepower, it was a dependable workhorse on small to medium-sized farms. Farmers appreciated its simplicity and ability to handle a variety of tasks, from mowing to light tillage.
The Ford New Holland 231 emerged in 1983 as a part of Ford's comprehensive tractor lineup, continuing production until 1992 under the Ford New Holland banner. Its engine was a Shibaura 1.5L 3-cylinder diesel engine producing approximately 33 horsepower. This provided ample power for its intended applications. The transmission was a gear-driven system, typically an 8-speed forward and 2-speed reverse transmission, offering a good range of speeds for different tasks. The PTO delivered around 28 horsepower at a standard 540 RPM. Hydraulic capacity was around 6 GPM. The 3-point hitch was a Category I hitch, capable of lifting around 1800 lbs. The 231 found widespread use in hay production, livestock operations, and general farm maintenance. It was distinct from larger models with its compact size and fuel efficiency, while offering more capability than lawn and garden tractors. This made it a sweet spot for many farms.
Specifications
| Engine | Shibaura 1.5L 33 HP Diesel |
|---|---|
| PTO HP | 28 HP @ 540 RPM |
| Transmission | Gear, 8 Forward / 2 Reverse |
| Hydraulics | 6 GPM, 1 remotes |
| 3-Point Hitch | Category I, 1800 lbs Lift Capacity |
| Fuel Capacity | 11 gallons |
| Weight | 3200 lbs |
| Years Produced | 1983-1992 |
Maintenance Tips
- Change the engine oil and filter every 250 hours of operation. Use an oil that meets the manufacturer's specifications for diesel engines.
- Inspect and clean the hydraulic system regularly, including checking the fluid level and condition. Replace hydraulic filters according to the service schedule to prevent contamination.
- Keep the fuel system clean by using quality fuel and adding a fuel stabilizer, especially during seasonal storage. Drain the sediment bowl regularly to remove any water or debris.
- Before storing the tractor for an extended period, drain the fuel tank, change the engine oil, and grease all fittings to prevent corrosion. Consider using a battery maintainer to prevent battery discharge.
History & Background
The Ford New Holland 231 was introduced in 1983, replacing earlier Ford models and continuing as part of the Ford New Holland line after the acquisition. There were no significant redesigns during its production run, and it served as a reliable and affordable option for farmers. The 231 contributed to the legacy of Ford and Ford New Holland tractors as dependable and practical machines.
Frequently Asked Questions
What engine is in the Ford New Holland 231?
The Ford New Holland 231 is equipped with a Shibaura 1.5L 3-cylinder diesel engine, producing approximately 33 horsepower.
What is the PTO horsepower on a 231?
The Ford New Holland 231 has a PTO horsepower rating of approximately 28 horsepower at 540 RPM.
What oil filter fits the 231?
The correct oil filter for a Ford New Holland 231 is commonly cross-referenced as a Fram PH3614, Wix 51348, or a NAPA 1348. Always verify compatibility with your specific tractor's manual or parts catalog.
What are common parts needed for the 231?
Common parts needed for the Ford New Holland 231 include engine oil filters, fuel filters, hydraulic filters, belts for the engine and accessories, hydraulic seals for the 3-point hitch and remotes, steering components like tie rod ends, and clutch parts such as the clutch disc and pressure plate.

C5NNB863A - Yoke (LH) Rod
SKU: C5NNB863A
8 in stock

C5NNA948A - Check Chain (LH) Eyelet
SKU: C5NNA948A
41 in stock

C5NNA947A - Check Chain (RH) Eyelet
SKU: C5NNA947A
26 in stock

C5NNA945C - Check Chain Clevis
SKU: C5NNA945C
95 in stock

C5NN678A - Check Chain (LH) Eyelet
SKU: C5NN678A
19 in stock

C5NN667A - Check Chain (RH) Eyelet
SKU: C5NN667A
20 in stock

C5NN595B - Leveling Fork Pin
SKU: C5NN595B
93 in stock

C5NN594E - Handle
SKU: C5NN594E
18 in stock

C5NN557B - Cat II Replacement Ball
SKU: C5NN557B
542 in stock

C5NN544D - Hydraulic Lift Shaft
SKU: C5NN544D
1 in stock

C5NN518B - Hydraulic Lift Quadrant Lever Friction Disk
SKU: C5NN518B
95 in stock

C5NN454C - Cat. l (RH) Stabilizer Arm
SKU: C5NN454C
78 in stock

C5NN454B - Cat II & III (RH) Stabilizer Arm
SKU: C5NN454B
58 in stock

C5NN16N321A - U-Bolt- (Ref. 12)
SKU: C5NN16N321A
78 in stock

9N595 - FORD / NEW HOLLAND
SKU: 9N595
141 in stock

957E597 - Check Chain (RH) Anchor
SKU: 957E597
20 in stock

957E596 - Check Chain (LH) Anchor
SKU: 957E596
7 in stock

957E591 - Check Chain
SKU: 957E591
16 in stock

957E566 - Knuckle SAME 1884376M1/704207R3
SKU: 957E566
53 in stock

957E560 - Center Link Pin
SKU: 957E560
2309 in stock

86563314 - Hydraulic Lift Piston Connecting Rod
SKU: 86563314
1 in stock

83977032 - Lift Cover Friction Disc
SKU: 83977032
146 in stock

82009197 - Drawbar w/ 1.500" Offset
SKU: 82009197
28 in stock
81817167 - RH Leveling box assy w/ fork
SKU: 81817167
63 in stock
