Ford New Holland 231 Tractor Parts
231 parts and accessories
The Ford New Holland 231, manufactured from 1983 to 1992, was a popular utility tractor known for its reliability and versatility. Powered by a robust 33 horsepower Shibaura diesel engine (approximately), and offering around 28 PTO horsepower, it was a dependable workhorse on small to medium-sized farms. Farmers appreciated its simplicity and ability to handle a variety of tasks, from mowing to light tillage.
The Ford New Holland 231 emerged in 1983 as a part of Ford's comprehensive tractor lineup, continuing production until 1992 under the Ford New Holland banner. Its engine was a Shibaura 1.5L 3-cylinder diesel engine producing approximately 33 horsepower. This provided ample power for its intended applications. The transmission was a gear-driven system, typically an 8-speed forward and 2-speed reverse transmission, offering a good range of speeds for different tasks. The PTO delivered around 28 horsepower at a standard 540 RPM. Hydraulic capacity was around 6 GPM. The 3-point hitch was a Category I hitch, capable of lifting around 1800 lbs. The 231 found widespread use in hay production, livestock operations, and general farm maintenance. It was distinct from larger models with its compact size and fuel efficiency, while offering more capability than lawn and garden tractors. This made it a sweet spot for many farms.
Specifications
| Engine | Shibaura 1.5L 33 HP Diesel |
|---|---|
| PTO HP | 28 HP @ 540 RPM |
| Transmission | Gear, 8 Forward / 2 Reverse |
| Hydraulics | 6 GPM, 1 remotes |
| 3-Point Hitch | Category I, 1800 lbs Lift Capacity |
| Fuel Capacity | 11 gallons |
| Weight | 3200 lbs |
| Years Produced | 1983-1992 |
Maintenance Tips
- Change the engine oil and filter every 250 hours of operation. Use an oil that meets the manufacturer's specifications for diesel engines.
- Inspect and clean the hydraulic system regularly, including checking the fluid level and condition. Replace hydraulic filters according to the service schedule to prevent contamination.
- Keep the fuel system clean by using quality fuel and adding a fuel stabilizer, especially during seasonal storage. Drain the sediment bowl regularly to remove any water or debris.
- Before storing the tractor for an extended period, drain the fuel tank, change the engine oil, and grease all fittings to prevent corrosion. Consider using a battery maintainer to prevent battery discharge.
History & Background
The Ford New Holland 231 was introduced in 1983, replacing earlier Ford models and continuing as part of the Ford New Holland line after the acquisition. There were no significant redesigns during its production run, and it served as a reliable and affordable option for farmers. The 231 contributed to the legacy of Ford and Ford New Holland tractors as dependable and practical machines.
Frequently Asked Questions
What engine is in the Ford New Holland 231?
The Ford New Holland 231 is equipped with a Shibaura 1.5L 3-cylinder diesel engine, producing approximately 33 horsepower.
What is the PTO horsepower on a 231?
The Ford New Holland 231 has a PTO horsepower rating of approximately 28 horsepower at 540 RPM.
What oil filter fits the 231?
The correct oil filter for a Ford New Holland 231 is commonly cross-referenced as a Fram PH3614, Wix 51348, or a NAPA 1348. Always verify compatibility with your specific tractor's manual or parts catalog.
What are common parts needed for the 231?
Common parts needed for the Ford New Holland 231 include engine oil filters, fuel filters, hydraulic filters, belts for the engine and accessories, hydraulic seals for the 3-point hitch and remotes, steering components like tie rod ends, and clutch parts such as the clutch disc and pressure plate.

RB001 - Cat I Replacement Ball
SKU: RB001
18 in stock

NCA563C - Lower Lift Link Pin
SKU: NCA563C
81 in stock

NCA473A - Hydraulic Lift Cylinder Piston Backup Ring
SKU: NCA473A
111 in stock

FP165 - Check Chain Clevis Kit
SKU: FP165
74 in stock

E4NN807AA - Front Drawbar Pin
SKU: E4NN807AA
229 in stock

E1NNB681AA - Hydraulic Lift Rocker Bushing
SKU: E1NNB681AA
10 in stock

E1ADDN995233 - Lift Link Ball (Cat I)
SKU: E1ADDN995233
18 in stock

E0NN585BA - Fork
SKU: E0NN585BA
21 in stock

E0NN569KB-KIT - Leveling Box Assembly w/ Fork
SKU: E0NN569KB-KIT
Out of stock

E0NN569AA - Leveling Box Assembly w/ Fork (RH)
SKU: E0NN569AA
63 in stock

E0NN535AA - Hydraulic Lift Rocker
SKU: E0NN535AA
2 in stock

D9NNB856BB - Complete Stabilizer Assembly
SKU: D9NNB856BB
118 in stock

D3NNB485A - Hydraulic Lift Cylinder Piston Backup Ring
SKU: D3NNB485A
8 in stock

D0NN555D - Cat. 1 Lower Lift Arm (RH)
SKU: D0NN555D
33 in stock

D0NN555C - Cat. I Lower (LH) Lift Arm
SKU: D0NN555C
145 in stock

CKPN485A - Cylinder & Pump Hydraulic Lift Cover Seal Kit & O-Ring
SKU: CKPN485A
70 in stock

C7NN591A - Check Chain
SKU: C7NN591A
29 in stock

C7NN535B - Hydraulic Lift Rocker
SKU: C7NN535B
8 in stock

C5NNN673A - LH Yoke rod
SKU: C5NNN673A
8 in stock

C5NNN563A - Lower Lift Link Pin
SKU: C5NNN563A
50 in stock

C5NNN557B - Lift Link Ball Retainer Spring
SKU: C5NNN557B
571 in stock

C5NNN455C - Cat. l (LH) Stabilizer Arm
SKU: C5NNN455C
17 in stock

C5NNN455B - Cat II & III (LH) Stabilizer Arm
SKU: C5NNN455B
37 in stock

C5NNK840B - Hydraulic Lift Rocker Pin
SKU: C5NNK840B
6 in stock
