Case IH 1456 Tractor Parts
1456 parts and accessories
The Case IH 1456 tractor, manufactured from 1969 to 1971, was a powerful and reliable workhorse on American farms. It featured an International Harvester DT-402 diesel engine producing around 146 horsepower and boasting a robust 120 PTO horsepower. Its combination of power and durability made the 1456 a popular choice for farmers tackling heavy tillage and demanding fieldwork.
The Case IH 1456 was produced between 1969 and 1971, building on the success of its predecessors in the International Harvester lineup. It was designed as a row-crop tractor, capable of handling a wide range of tasks. The 1456 is powered by an International Harvester DT-402 inline 6-cylinder diesel engine, displacing 402 cubic inches and delivering approximately 146 engine horsepower. This engine was known for its reliability and lugging ability. The tractor was offered with a gear-type transmission, providing 8 forward and 2 reverse speeds. The independent PTO delivered around 120 horsepower, available in both 540 and 1000 RPM configurations. The hydraulic system had a capacity of approximately 15 gallons per minute (GPM) with typically 2 remote valves. It was equipped with a Category II 3-point hitch. Farmers primarily used the 1456 for row crop operations like plowing, disking, planting, and cultivating. It was also suited for hay baling, livestock feeding, and general tillage. The 1456 distinguished itself from other models with its larger engine and increased horsepower, making it suitable for larger farms and heavier workloads.
Specifications
| Engine | International Harvester DT-402 146 HP Diesel |
|---|---|
| PTO HP | 120 HP @ 540/1000 RPM |
| Transmission | Gear 8F/2R |
| Hydraulics | 15 GPM, 2 remotes |
| 3-Point Hitch | Category II, 6,200 lbs lift capacity |
| Fuel Capacity | 38 gallons |
| Weight | 11,635 lbs |
| Years Produced | 1969-1971 |
Maintenance Tips
- Engine Oil & Filter: Change your engine oil and filter every 250 hours of operation, using a high-quality oil that meets or exceeds the manufacturer's specifications. Regularly check oil levels.
- Hydraulic System: Inspect hydraulic fluid levels and filters regularly. Change the hydraulic fluid and filter every 500 hours of operation, or more frequently if the oil appears dirty or contaminated.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 250 hours. Drain any water or sediment from the fuel tank regularly. Consider a fuel additive for cold weather operation and to prevent gelling.
- Seasonal Storage: Before storing your tractor for the winter, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.
History & Background
The Case IH 1456 was introduced in 1969 as a part of International Harvester's line of powerful row-crop tractors. It represented a significant step up in horsepower and capability compared to earlier models. While it wasn't drastically redesigned during its short production run, the 1456 left a lasting impact as a dependable and strong tractor, contributing to the modernization of farming practices.
Frequently Asked Questions
What engine is in the Case Ih 1456?
The Case IH 1456 is powered by an International Harvester DT-402 6-cylinder diesel engine producing approximately 146 horsepower.
What is the PTO horsepower on a 1456?
The PTO horsepower rating on the Case IH 1456 is approximately 120 horsepower, available in both 540 and 1000 RPM configurations.
What oil filter fits the 1456?
Common oil filter cross-references for the Case IH 1456 include IH part number 313554R91, Fleetguard LF670, and Wix 51794. Always verify fitment with your parts supplier.
What are common parts needed for the 1456?
Common parts needed for the Case IH 1456 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic cylinder seal kits, steering components (tie rod ends, steering cylinders), and clutch components (disc, pressure plate, throwout bearing).

390857R1 - Adjustable Screw
SKU: 390857R1
14 in stock

390856YKIT - Park Lock (Yoke End) Kit
SKU: 390856YKIT
20 in stock

390856KIT - Park Lock Linkage Kit
SKU: 390856KIT
216 in stock

385757R3 - Reverse Drive Cover Gasket
SKU: 385757R3
236 in stock

384431R2 - TA Hyd. Clutch Driving Plate
SKU: 384431R2
9 in stock

384430R2 - TA Hyd. Clutch Piston Backing Plate
SKU: 384430R2
6 in stock

384368R12 - Brake Piston Assembly
SKU: 384368R12
6 in stock

384307R1 - Transmission Brake Operating (Special Spring Loaded) Rod
SKU: 384307R1
34 in stock

384248R1 - Clutch Operating Rod Turnbuckle
SKU: 384248R1
20 in stock

384091R3 - Constant Mesh Gear Spacer
SKU: 384091R3
9 in stock

382492R2 - Clutch Rod Pin
SKU: 382492R2
107 in stock

382349R1 - Constant Mesh Torque Amplifier Quill Gear
SKU: 382349R1
19 in stock

380319R1 - Pump Drive (Hitch) Gear
SKU: 380319R1
3 in stock

380315R2 - Range Cover Gasket
SKU: 380315R2
226 in stock

380178R11 - Clutch Operating; Rear Rod
SKU: 380178R11
21 in stock

380126R2 - Countershaft Gears Spacer
SKU: 380126R2
23 in stock

380117R1 - Cam Retaining Coupling
SKU: 380117R1
113 in stock

380116R3 - Cam Pivot Shaft
SKU: 380116R3
34 in stock

380115R2 - Detent Roller
SKU: 380115R2
171 in stock
380115R1 - Ref 8 - Detent roller
SKU: 380115R1
171 in stock

380112R2 - Transmission Speed Cover Gasket
SKU: 380112R2
23 in stock

380110R1 - Clutch Release Fork
SKU: 380110R1
20 in stock

223312 - Wedge Bolt
SKU: 223312
357 in stock

1981317C1 - Transmission Brake Lever Assembly
SKU: 1981317C1
84 in stock
