Husqvarna Oil Filter: Engine Oil Filters by Model
Keep your Husqvarna running smoothly with regular oil changes and the correct oil filter. This guide provides information on finding the right filter for your Husqvarna mower or tractor, plus helpful maintenance tips.
Introduction to Husqvarna Oil Filters
Maintaining your Husqvarna lawn mower, zero-turn mower, or garden tractor is crucial for its longevity and performance. A key part of routine maintenance is changing the oil and oil filter. A clean oil filter ensures that your engine oil remains free of harmful contaminants, protecting critical engine components from wear and tear. This guide will help you identify the correct husqvarna oil filter for your specific model, understand oil change intervals offer general maintenance advice.
Recommended Parts for This Guide
1 part we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
At Madison Tractor Company, we understand the importance of using the right parts for your equipment. We carry a wide selection of Husqvarna oil filters and other parts, along with those for other major brands like John Deere, Craftsman, Cub Cadet, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity Dixie Chopper.
If you're also looking for information on air filters or other filter types, be sure to check out our comprehensive guide to air, oil fuel filters.
Finding the Right Husqvarna Oil Filter
The easiest way to find the correct husqvarna oil filter is to consult your Husqvarna operator's manual. The manual will specify the exact part number required for your particular engine model. If you don't have your manual, don't worry! You can often find digital versions on the Husqvarna website or through online search engines.
Another option is to use our parts lookup tool at Madison Tractor Company. Simply enter your Husqvarna model number our system will display a list of compatible parts, including oil filters. We also offer cross-reference tools to help you find an equivalent filter from another brand if needed, though we always recommend using the OEM (Original Equipment Manufacturer) filter whenever possible.
Common Husqvarna Oil Filter Part Numbers
While specific model information is always best, here are some common Husqvarna oil filter part numbers to get you started
Browse our Husqvarna oil filter catalog for current part numbers and pricing.
Important Note Always double-check the part number against your engine model to ensure proper fit and function. Using the wrong filter can lead to engine damage.
Husqvarna Oil Change Intervals
Regular oil changes are vital for maintaining the health of your Husqvarna engine. The recommended oil change interval can vary depending on the engine model and operating conditions, but here are some general guidelines
- New Engines Change the oil after the first 8 hours of operation to remove any manufacturing debris.
- Normal Use Change the oil every 50 hours of operation or at least once a year, whichever comes first.
- Heavy Use If you operate your Husqvarna equipment in dusty or dirty conditions, or for extended periods, consider changing the oil more frequently, perhaps every 25 hours.
Always refer to your operator's manual for the manufacturer's recommended oil change interval.
How to Change Your Husqvarna Oil Filter and Oil
Here's a step-by-step guide to changing your Husqvarna oil and oil filter. Always consult your owner's manual for specific instructions related to your model.
- Gather Supplies You'll need a new husqvarna oil filter, the correct type and amount of engine oil (check your manual), an oil filter wrench, a drain pan, a socket wrench or wrench for the drain plug, a funnel rags. You may also need gloves and safety glasses.
- Warm Up the Engine Run the engine for a few minutes to warm the oil. Warm oil flows more easily.
- Turn Off the Engine and Disconnect the Spark Plug This is a crucial safety step to prevent accidental starting.
- Locate and Remove the Drain Plug Place the drain pan under the drain plug. Use the appropriate wrench to remove the drain plug and let the oil drain completely.
- Remove the Old Oil Filter Use the oil filter wrench to loosen and remove the old oil filter. Be prepared for some oil spillage. Dispose of the old filter properly.
- Prepare the new oil filter Lightly lubricate the rubber gasket on the new oil filter with fresh engine oil. This helps create a good seal.
- Install the New Oil Filter Screw the new oil filter onto the engine by hand until the gasket makes contact, then tighten it another 1/2 to 3/4 turn, according to the filter's instructions. Do not overtighten.
- Reinstall the Drain Plug Clean the drain plug and reinstall it, tightening it securely. Use a new crush washer if recommended by the manufacturer.
- Add New Oil Remove the oil fill cap and use a funnel to add the correct amount of new engine oil. Check the oil level with the dipstick.
- Check for Leaks Start the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug.
- Dispose of Used Oil Properly Take the used oil to a recycling center or auto parts store for proper disposal.
Safety Warning Used engine oil can be harmful to the environment. Never pour it down drains or onto the ground.
Beyond the Oil Filter: Other Important Maintenance
While changing your husqvarna oil filter and oil is essential, don't neglect other important maintenance tasks
- air filter A clean air filter is just as crucial as a clean oil filter. Check and replace your air filter regularly. See our guide to Husqvarna air filters for more information. And if your machine has a Briggs & Stratton engine, check out our article on Briggs & Stratton air filters for your engine.
- fuel filter Replace your fuel filter annually to ensure a clean fuel supply.
- Spark Plugs Replace your spark plugs every year or two for optimal engine performance.
- Blades Keep your mower blades sharp and balanced for a clean cut. Replace them when they become worn or damaged.
- Belts & Pulleys Inspect belts and pulleys for wear and tear. Replace them as needed to maintain proper drive function.
- Spindles & Bearings Regularly grease spindles and bearings to prevent premature failure.
We carry a comprehensive range of maintenance parts for your Husqvarna equipment, including belts, blades, spindles, pulleys, filters, spark plugsbearings.
If you have a machine with a Kawasaki engine, don't miss our guides on Kawasaki engine oil filters and Kawasaki engine air filters.
Shop Husqvarna Parts at Madison Tractor
At Madison Tractor Company, we're committed to providing you with the highest quality Husqvarna parts at competitive prices. We also carry parts for brands like John Deere, Craftsman, Cub Cadet, Toro, Ariens, Murray and many more.
Browse our extensive online catalog today to find the husqvarna oil filter and other parts you need to keep your equipment running smoothly. Our knowledgeable staff is always available to answer your questions and help you find the right parts for your specific model. Shop with confidence at Madison Tractor Company! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Small Engine Filter Guide: Air, Oil & Fuel Filters by Engine Brand








